1 1  "Insufficient memory to continue"
1 2  "Not found...press RETURN to continue"
1 3  "BACK-UP"
1 4  "Enter configuration file name: "
1 5  "Choose MENU option"
1 6  "Reading plot configuration file . . ."
1 7  "Do you wish to exit? (y/n) "
1 8  "\nError configuration file %s does not exist.\nContinuing . . ."
1 9  "Configuration file name:  "
1 10 "Enter number of copies (%d) => "
1 11 "Current working directory: "
1 12 "Enter directory name: "
1 13 "Exiting . . ."
1 14 "EVEN"
1 15 "ESCAPE"
1 16 "- PG UP/DN -"
1 17 "NONE"
1 18 "ODD"
1 19 "OFF"
1 20 "ON"
1 21 "Enter paper size or 'u' for user defined "
1 22 "Enter paper limits in "
1 23 "Enter plot file name:  "
1 24 "Enter color number to reassign, or RETURN for next color: "
1 25 "CADKEY color \"%d\" assigned to pen number"
1 26 "Enter pen width in "
1 27 "Plot file name:  "
1 28 "Enter plotter type (%d): "
1 29 "Enter plot rotation of -360 to 360 degrees "
1 30 "Enter plot velocity in cm/sec "
1 31 "Enter disk file: "
1 32 "Reading plot prompts file . . ."
1 33 "Not found...press RETURN to create on exit "
1 34 "Enter scale factor, or 'a' for autoscale "
1 35 "type EXIT to return to Plotfast"
1 36 "VERSION"
1 37 "Enter X offset in "
1 38 "Enter Y offset in "
1 39 "Error %d while plotting...press RETURN to continue"
1 40 "Current item:"
1 41 "Item count:"
1 42 "Current pen number:"
1 43 "Maximum pen number:"
1 44 "Marker"
1 45 "Line"
1 46 "Arc"
1 47 "Curve"
1 48 "Text"
1 49 "Polygon"
1 50 "Copy number:"
1 51 "Error with terminal type %s"
1 52 "SPOOLER"
1 53 "spooler  prog "
1 54 "Press any key for next copy"
1 55 "Start time:"
1 56 "Last item plot time:"
1 57 "Error reading plotter type %s...press RETURN to continue"
1 58 "Line type"
1 59 "inches"
1 60 "millimeters"
1 61 "OPT"
1 62 "Place pen %d in plotter, press <ESC> or any key to continue"
1 63 "Enter curve tolerance factor"
1 64 "Palette"
1 65 "Can't find font file (%s)... press RETURN to continue"
1 66 "Can't read plotcap file"
1 67 "Plotter Selection"
1 68 "%2d) %s"
1 69 "PgDn for Next Page"
1 70 "PgDn for Next Page, PgUp for Previous Page"
1 71 "PgUp for Previous Page"
1 72 "'n' for Next Page"
1 73 "'n' for Next Page, 'p' for Previous Page"
1 74 "'p' for Previous Page"
1 75 "NONE"
1 76 "No plotter selected... press RETURN to continue"
1 77 "Scale must be > 0.0... press RETURN to continue"
1 78 "Curve tolerance must be >= 1.0... press RETURN to continue"
1 79 "Pen width must be > 0.0 and < 10.0... press RETURN to continue"
1 80 "Rotation must be > -360 and < 360... press RETURN to continue"
1 81 "Velocity must be > 0.0 and < 128... press RETURN to continue"
1 82 "Paper limits must be > 0.0... press RETURN to continue"
1 83 "Enter xmin clip limit in "
1 84 "Enter ymin clip limit in "
1 85 "Enter xmax clip limit in "
1 86 "Enter ymax clip limit in "
1 87 "Error clip limit must be >= 0.0... press RETURN to continue"
1 89 "Bad clip limits for paper size... press RETURN to continue"
1 90 "Rational Cubic Curve"

2 1  "PSIZE:        "
2 2  "PLOTSC:       "
2 3  "ROT:          "
2 4  "VEL:          "
2 5  "PEN SORT:     "
2 6  "XOFF:         "
2 7  "YOFF:         "
2 8  "PTYPE:        "
2 9  "PORT:         "
2 10 "PEN WID:      "
2 11 "BAUD:         "
2 12 "HANDS:        "
2 13 "PARITY:       "
2 14 "STOPBITS:     "
2 15 "WORDSIZE:     "
2 16 "XMIN_CL:      "
2 17 "YMIN_CL:      "
2 18 "XMAX_CL:      "
2 19 "YMAX_CL:      "
2 20 "CRV_TOL:      "

3 1 1 3 "FILES     "
3 1 2 0 "PLOT TYPE "
3 1 3 6 "PLOT PORT "
3 1 4 9 "ATTRIBUTES"
3 1 5 5 "COMMUNICAT"
3 1 6 0 "PEN ASSIGN"
3 1 7 2 "COMMANDS  "
3 1 8 0 "PLOT      "
3 1 9 2 "EXIT      "
3 2 1 1 0 "PLOT FILE "
3 2 1 2 0 "CONF FILE "
3 2 1 3 0 "CHANGE DIR"
3 2 3 1 0 "COM1      "
3 2 3 2 0 "COM2      "
3 2 3 3 0 "LPT1      "
3 2 3 4 0 "LPT2      "
3 2 3 5 0 "LPT3      "
3 2 3 6 0 "DISK FILE "
3 2 4 1 2 "PLOT SIZE "
3 2 4 2 0 "PLOT SCALE"
3 2 4 3 0 "ROTATION  "
3 2 4 4 0 "VELOCITY  "
3 2 4 5 3 "PEN SORT  "
3 2 4 6 0 "PEN WIDTH "
3 2 4 7 2 "OFFSET    "
3 2 4 8 0 "CURV. TOL."
3 2 4 9 2 "PEN PROMPT"
3 2 5 1 8 "BAUDRATE  "
3 2 5 2 3 "PARITY    "
3 2 5 3 2 "HANDSHAKE "
3 2 5 4 2 "STOPBIT "
3 2 5 5 2 "WORD SIZE "
3 2 7 1 0 "SHELL     "
3 2 7 2 0 "DIR       "
3 2 9 1 0 "YES       "
3 2 9 2 0 "NO        "
3 3 4 1 1 0 "PAPER SIZE"
3 3 4 1 2 0 "CLIP LIMIT"
3 3 4 5 1 0 "ON        "
3 3 4 5 2 0 "OFF       "
3 3 4 5 3 0 "OPTIMIZE  "
3 3 4 7 1 0 "X OFFSET  "
3 3 4 7 2 0 "Y OFFSET  "
3 3 4 9 1 0 "ON        "
3 3 4 9 2 0 "OFF       "
3 3 5 1 1 0 "300 BAUD "
3 3 5 1 2 0 "600 BAUD "
3 3 5 1 3 0 "1200 BAUD "
3 3 5 1 4 0 "2400 BAUD "
3 3 5 1 5 0 "4800 BAUD "
3 3 5 1 6 0 "9600 BAUD "
3 3 5 1 7 0 "19200 BAUD"
3 3 5 1 8 0 "38400 BAUD"
3 3 5 2 1 0 "NONE      "
3 3 5 2 2 0 "ODD       "
3 3 5 2 3 0 "EVEN      "
3 3 5 3 1 0 "NONE      "
3 3 5 3 2 0 "XON       "
3 3 5 4 1 0 "1 BIT     "
3 3 5 4 2 0 "2 BITS    "
3 3 5 5 1 0 "7 BITS    "
3 3 5 5 2 0 "8 BITS    "