ea#-01-i.01
-
ea#-01-i.02
-
The illustration above shows the Finger Guide Layout,
complete with linear and ordinate dimensions.
-
ea#-01-i.03
-
Choose the DETAIL option.
  
-
Choose the LAYOUT option.
   
-
Choose the INSTANCE option.
   
-
Choose the MODIFY option.
  
-
Choose the BLANK option.
  
-
Cursor-indicate in the highlighted box to select the
instance (view) for blanking.
- 
Choose the SINGLE option.
     
-
Use the immediate mode command ALT-W to window-in on
the isometric instance.
Select entity 1   (press RETURN when done)
ALT-W
-
Cursor-indicate in the highlighted box for the first
corner of the window.
Indicate 1st corner of window
-
Cursor-indicate in the highlighted box for the second
corner of the window.
Indicate 2nd corner of window
-
ALT-W temporarily interrupts the BLANK selection(s). 
The next step selects an entity.
Select entity 1   (press RETURN when done)
-
Select the highlighted line. This is the entity to be
blanked in the isometric instance.
Select entity 1   (press RETURN when done)
line
-
Press ENTER to accept the selection for blanking.
     
Select entity 2   (press RETURN when done)   
-
The blanked line no longer appears in the isometric
instance, yet remains visible elsewhere.
Select drawing instance to modify.
-
Cursor-indicate in the highlighted box to re-select the
isometric instance for blanking.
-
Choose the SINGLE option.
  
-             
Select the highlighted line. 
   
Select entity 1   (press RETURN when done)
line
-
Select the highlighted line as the next entity to
be blanked.
Select entity 2   (press RETURN when done)
line
-
Select the highlighted line as the next entity to
be blanked. 
Select entity 3   (press RETURN when done)
line
-
Select the highlighted line as the next entity to
be blanked. 
Select entity 4   (press RETURN when done)
line
-
Select the highlighted line as the next entity to
be blanked. 
Select entity 5   (press RETURN when done)
line
-
Select the highlighted line as the next entity to
be blanked. 
Select entity 6   (press RETURN when done)
line
-
Select the highlighted ellipse as the next entity
to be blanked. 
Select entity 7   (press RETURN when done)
line
-
Select the highlighted line as the next entity to
be blanked. 
Select entity 8   (press RETURN when done)
line
-
Select the highlighted line as the next entity to
be blanked. 
Select entity 9   (press RETURN when done)
line
-
Press ENTER to accept the selection for blanking.
        
Select entity 10  (press RETURN when done)   
-
The isometric instance with blanked geometry is
displayed. Only this instance is changed.
Select drawing instance to modify.
-
Press ESCAPE to return to the main menu
      
Select drawing instance to modify
-
Pressing ESCAPE does not exit layout mode. The main menu
options remain available in this mode.
-
ea#-01-i.04
-
ea#-01-r.05
-
That's all for now folks, See ya
-
