eb#-01-i.01
-
This is an illustration of the linear dimensions you add
to the front view of the Finger Guide. 
Choose option
-
eb#-01-i.02
-
Choose the DETAIL option
 
Choose option
- 
Choose the DIMENSN option
 
Choose option
- 
Choose the HORIZTL option
 
Choose option
- 
Select the highlighted part of the line as the first 
dimension position. 
Indicate 1st dimension position  / Select entity
line
-
Select the highlighted part of the line as the second
dimension position. 
Indicate 2nd dimension position  / Select entity
line
-
Indicate in the highlighted box to position the
dimension text. 
Indicate text position
-
All the horizontal dimensions are created. The next step
is to add the vertical dimensions. BACK-UP and choose
VERTICL then indicate the dimension positions.
Indicate 1st dimension position  / Select entity
-
Choose BACK-UP to return to DIMENSN menu.
 
Indicate 1st dimension position  / Select entity
-
Choose the VERTICL option
 
Choose option
- 
Select the highlighted section of the line for the first
dimension position. 
Indicate 1st dimension position  / Select entity
line
-
Select the highlighted section of the line for the
second dimension position. 
Indicate 2nd dimension position  / Select entity
line
-
Using CTRL-A toggles the arrows from inside the witness 
lines to the outside. Nothing will happen until you signal
for CADKEY to create the dimensions.
Indicate 1st dimension position  / Select entity
-
Use the Immediate Mode command CTRL-A to toggle the arrows 
setting to the outside. 
Choose option
CTRL-A
-
Indicate in the highlighted box for the dimension text
position. 
Indicate text position
-
Press ESCAPE to exit this function.
 
Choose option
-
eb#-01-r.03
-

