;***********************************************************************	
;
; OEMSETUP.INF
;
;       LAN Adapter/A for Ethernet "LEGENDS" card and driver SETUP file
;       This file can be named OEMSETUP.INF or OEMSETNT.INF  
;       Card:    IBM Part# 48G7171   IBM FRU# 48G7172  
;       Driver:  IBMENIIN.SYS
;
; History:
;    IBM
;       Robert Huggins  28-Apr-1994     Adapted to IBM LEGENDS card
;
;***********************************************************************

;-----------------------------------------------------------------------
; OPTION TYPE
; -----------
; This identifies the Option type we are dealing with.  The different
; possible types are:
;
; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ...
;
;  Types specific to networking:
;
; NetAdapter,        a netcard / adapter combination or just a netcard
; NetDriver,         just a netcard driver
; NetTransport,      a complete NDIS-compliant TDI transport stack
; NetService,        an NT networking service
; NetWork,           a complete network ensemble.
; NetProvider        a complete network which supports NT MPR protocol
;-----------------------------------------------------------------------

[Identification]
    OptionType = NetAdapter

;-----------------------------------------------------------------------
; PlatformsSupported
; ------------------
; This identifies the platforms supported by the adapter card.
; Possible types are:
;
; ISA, EISA, MCA, various internal versions, etc.
;-----------------------------------------------------------------------

[PlatformsSupported]
    MCA

;-----------------------------------------------------------------------
; OPTION LIST
; -----------
; This section lists the OEM Option key names.  These keys are locale
; independent and used to represent the option in a locale independent
; manner.
;
;-----------------------------------------------------------------------

[Options]
    IBMENIIN

;***********************************************************************
; CONSTANTS FOR USING DIALOGS
;***********************************************************************

[FileConstants]
;
;  File names, etc.
;
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0

;
; EventLog Message File
;
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"

;
; Product Info
;
Manufacturer    = "IBM"
ProductMajorVersion     = "3"
ProductMinorVersion     = "1"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
;
; Software
;
ProductSoftwareName      = "IBMENIIN"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\IBMENIIN.sys"
NetRuleSoftwareType      = "IBMENIINSys ndisDriver IBMENIINDriver"
NetRuleSoftwareUse       = $(SoftwareType)
NetRuleSoftwareBindForm  = """IBMENIINSys"" yes no container"
NetRuleSoftwareClass     = {"IBMENIINDriver basic"}
NetRuleSoftwareBindable  = {"IBMENIINDriver IBMENIINAdapter non exclusive 100"}

;
; Hardware
;
ProductHardwareName      = "IBMENIIN"
NetRuleHardwareType      = "IBMENIIN IBMENIINAdapter"
NetRuleHardwareBindForm  = " yes yes container"
NetRuleHardwareClass     = {"IBMENIINAdapter basic"}

; 
; MCA Unique Hardware ID
;
; For Legends, POS Register 100 is the LSB of the card ID  224 = E0
; For Legends, POS Register 101 is the MSB of the card ID  255 = FF
; For Legends, the Hex value FFEO expressed in decimal is 65504               
;
POS_LSB = 224
POS_MSB = 255
MCA_ID  = 65504       
;
; Registry Key
;
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"




;-----------------------------------------------------------------------
;
; Files 
;
;-----------------------------------------------------------------------
[Source Media Descriptions]
    1 = "Setup disk for IBM LAN Adapter/A for Ethernet" 

[Signature]
    FileType = MICROSOFT_DRVLIB_FILE
[GetSignature]
    read-syms Signature
    return $(FileType)

;-----------------------------------------------------------------------
;
; Product Type 
;
;-----------------------------------------------------------------------
[ProductType]
STF_PRODUCT            = Winnt
STF_PLATFORM           = I386



;-----------------------------------------------------------------------
;
; Files-Inf 
;
; Note:  Size below controls gauge as file is being copied
;
;-----------------------------------------------------------------------
[Files-INF]
1, OEMSETUP.INF , SIZE=40000, RENAME=$(!UG_Filename)



;-----------------------------------------------------------------------
;
; Files-IBMENIIN 
;
;
; Note:  Size below controls gauge as file is being copied 
;		 It might be related to the following error message:
; PreCondition Failure
; PreCondition Failed: File: D:\nt\private\windows\setup\src\gauge.c,Line:
; 242  
;
;-----------------------------------------------------------------------
[Files-IBMENIIN]
1, IBMENIIN.SYS , SIZE=78848

[Files-HLP]
1, IBMENIIN.HLP, SIZE=999

;-----------------------------------------------------------------------
;
; Languages Supported by this OEMSETUP.INF file  (known as STF_LANGUAGE)
;
;-----------------------------------------------------------------------
[LanguagesSupported]
    ENG



;-----------------------------------------------------------------------
;
; Options Text for Language=ENG
;
;-----------------------------------------------------------------------
[OptionsTextENG]                                                       
    IBMENIIN = "IBM LAN Adapter/A for Ethernet (Part# 48G7171)" 



;-----------------------------------------------------------------------
;
; File constants in the ENG language
;
;-----------------------------------------------------------------------
[FileConstantsENG]
;
;  to override the default ""
;
FunctionTitle = "IBM LAN Adapter/A for Ethernet (Part# 48G7171) Setup"
;
;  to override the default ""
;
ProductSoftwareDescription = "NDIS 3.0 Ethernet driver"
;
;  to override the default ""
;
ProductHardwareDescription = "IBM Part# 48G7171   FRU# 48G7172"
;
;  to override the default ""
;
ProductSoftwareTitle = "IBM LAN Adapter/A for Ethernet driver"
;
;  to override the default ""
;
ProductHardwareTitle = "IBM LAN Adapter/A for Ethernet (MCA)"


CANNOT_FIND_ANY_CARD = "Network card is not present in the system."
ShellCodeErrorTitle  = "Error: "$(FunctionTitle)
ShellCodeErrorText   = "Shell Code Error."

;-----------------------------------------------------------------------
;
; No override needed for Dialog Constants in English
;
;-----------------------------------------------------------------------
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "C&ontinue"
Cancel      = "C&ancel" 

[FileDependentDlgENG]
Edit1Label = "&Network Address:"
Group1 = "Full Duplex Operation"
Radio1 = "H&alf Duplex"
Radio2 = "&Full Duplex"
DlgType = "RadioCombination"
DlgTemplate = "NETWORK_NUMBER"
Caption = "Enter network address for adapter in slot "$(SlotNum)
ComboListItemsIn = {}
ComboListItemsOut = {}
OptionsGreyed = {}
HelpContext = 6666
EditTextLim = 17
EditTextIn  = $(NetworkAddress)
EditFocus   = "ALL"
RCCtlFocusOn = 403

;-----------------------------------------------------------------------
;
; General Constants 
;
;-----------------------------------------------------------------------
[GeneralConstants]
;
;  Program flow control variables.
;
from      = ""
to        = ""
;
;  Return codes; Exit_Code is set to one of these
;
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2

KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""

TRUE            = 1
FALSE           = 0
NoTitle         = 0

ExitState   = "Active"
OldVersionExisted = $(FALSE)

DriverPath      = $(!STF_NTPATH)\drivers

[date]
    ; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
    ; Minute, Second }
    Now = {} ? $(!LIBHANDLE) GetSystemDate


;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION:   To verify that this INF deals with the same type of options
;                as we are choosing currently.
;
; INPUT:         None
;
; OUTPUT:        $($R0): STATUS: STATUS_SUCCESSFUL
;                $($R1): Option Type (COMPUTER ...)
;                $($R2): Diskette description
;---------------------------------------------------------------------------

[Identify]
	set !Stf-DebugOutputControl = 1

    Debug-Output "Starting Identify"
    ;
    ;
    read-syms Identification

    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)

    Return $(Status) $(Identifier) $(Media)

;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION:   To return the option list supported by this INF and the
;                localised text list representing the options.
;
;
; INPUT:         $($0):  Language used. ( ENG | FRN | ... )
;
; OUTPUT:        $($R0): STATUS: STATUS_SUCCESSFUL |
;                                STATUS_NOLANGUAGE
;                                STATUS_FAILED
;                                STATUS_NOTSUPPORTED
;
;                $($R1): Option List
;                $($R2): Option Text List
;------------------------------------------------------------------------

[ReturnOptions]

    Debug-Output "Starting ReturnOptions"

    
    ;
    ;
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ;
        ; Check if the platforms requested is supported
        ;
        ifstr(i) $($1) == ""
           goto returnoptions
        endif

        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
       set Status = STATUS_NOLANGUAGE
       goto finish_ReturnOptions
    endif

    ;
    ; form a list of all the options and another of the text representing
    ;

returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL

finish_ReturnOptions = +
    Debug-Output "Status=         "$(Status)
    Debug-Output "OptionList=     "$(OptionList)
    Debug-Output "OptionTextList= "$(OptionTextList)

    Return $(Status) $(OptionList) $(OptionTextList)

;------------------------------------------------------------------------
;
; InstallOption:
;
;      This section is shelled to by main installation processing
;      or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION:  To copy files representing Options
;            To configure the installed option
;            To update the registry for the installed option
;
; INPUT:     $($0):  Language to use
;            $($1):  OptionID to install
;            $($2):  SourceDirectory
;            $($3):  AddCopy  (YES | NO)
;            $($4):  DoCopy   (YES | NO)
;            $($5):  DoConfig (YES | NO)
;
; OUTPUT:    $($R0): STATUS: STATUS_SUCCESSFUL |
;                            STATUS_NOLANGUAGE |
;                            STATUS_USERCANCEL |
;                            STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
    Debug-Output "Starting InstallOptions"
    Debug-Output "1= "$($1)
    Debug-Output "2= "$($2)
    Debug-Output "3= "$($3)
    Debug-Output "4= "$($4)
    Debug-Output "5= "$($5)
    ;
    ; Set default values for
    ; extract parameters
    ;
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif

    set-subst LF = "\n"

    read-syms GeneralConstants
 
    read-syms FileConstants

    read-syms DialogConstants$(!STF_LANGUAGE)
 
    read-syms FileConstants$(!STF_LANGUAGE)

    detect date

    set-title  $(FunctionTitle)

    set to   = Begin
    set from = Begin
;
;  Assume all is well.
;
    set CommonStatus = STATUS_SUCCESSFUL

    EndWait

;
;   Set up the operation-mode-based variables and gaily welcome
;   the user.  If the "install mode" variable is improperly set,
;   assume this is a new installation.
;

Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
        set CommonStatus = STATUS_REBOOT
        Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
            ;
            ;   You cannot config the software component
            ;
            Debug-Output "Cannot configure the IBMENIIN driver software."
            Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
	        ifint $($ShellCode) != $(!SHELL_CODE_OK)
    	        Debug-Output "ShellCode error: cannot get an error string."
        	    goto ShellCodeError
        	endif
	        set Error = $($R0)
    	    set from = end
        	set to = end
	        goto nonfatalinfo
		else
	        set StartLabel = configureadapter
		endif
    else
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
    endif

    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)



;-----------------------------------------------
; Installation Section
;-----------------------------------------------

installadapter = +
;
;   First, check whether the same version of the software exists
;
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

    Ifstr $(KeyProduct) != $(KeyNull)
        ;
        ; Same version already existed in the local machine
        ; Popup the dialog and ask the user whether he wants to continue
        ;
        CloseRegKey $(KeyProduct)

        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           ;
           ; Cannot Install the same software again
           ;
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif

           goto end
        else
           ;
           ; Add a new adapter card?
           ;
           Shell $(UtilityInf), CardExistedDlg

           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error: cannot get an error string."
               goto ShellCodeError
           endif

           ifstr(i) $($R1) != "OK"
               Set CommonStatus = STATUS_USERCANCEL
               goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    endif
    goto nextstep



;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
;   Get the current values of all the parameters
;
configureadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) NetCardKey
    ifstr(i) $(NetCardKey) == ""
        set CommonStatus = STATUS_USERCANCEL
        goto successful
    endif
    GetRegValue $(NetCardKey) "ServiceName" ServiceInfo
    set ServiceName = *($(ServiceInfo),4)
    CloseRegKey $(NetCardKey)
    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters" $(MAXIMUM_ALLOWED) ParamKey
    ifstr(i) $(ParamKey) != ""
        GetRegValue $(ParamKey),"NetworkAddress", NetworkAddressInfo
        set NetworkAddress = *($(NetworkAddressInfo), 4)
        GetRegValue $(ParamKey),"SlotNumber", SlotNumberInfo
        set SlotNum = *($(SlotNumberInfo), 4)
         GetRegValue $(ParamKey),"FullDuplex", FullDuplexInfo
         set FullDuplex = *($(FullDuplexInfo), 4)
         Ifstr(i) $(FullDuplex) == "0"
             set RadioIn = {1}
         else
             set RadioIn = {2}
         endif
        read-syms FileDependentDlg$(!STF_LANGUAGE)
         SetHelpFile $(!STF_CWDDIR)ibmeniin.hlp 6666 6666
         Debug-Output "HELP FILE"$(!STF_CWDDIR)ibmeniin.hlp
        ui start "InputDlg"
        ifstr(i) $(DLGEVENT) == "CONTINUE"
            set NewNetworkAddress = *($(EditTextOut),1)
            ifstr(i) $(NetworkAddress) == $(NewNetworkAddress)
                set CommonStatus = STATUS_USERCANCEL
            else
                SetRegValue $(ParamKey) {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NewNetworkAddress)}
            endif
             set FullDuplexIndex =  *($(RadioOut),1)
             Ifint $(FullDuplexIndex) == 2
                 ifstr(i) $(FullDuplex) == "0" 
                    set FDX = "1" 
                    SetRegValue $(ParamKey) {FullDuplex,$(NoTitle),$(!REG_VT_DWORD),$(FDX)}
 					set CommonStatus = STATUS_REBOOT
                 endif
             else 
                 ifstr(i) $(FullDuplex) == "1" 
 	            set FDX = "0" 
                     SetRegValue $(ParamKey) {FullDuplex,$(NoTitle),$(!REG_VT_DWORD),$(FDX)}
 	            set CommonStatus = STATUS_REBOOT
                 endif
             endif
            ui pop 1
        else
            set CommonStatus = STATUS_USERCANCEL
            ui pop 1
        endif
        CloseRegKey $(ParamKey)
    endif
    goto successful


nextstep = +
    StartWait

installproduct = +

    Shell $(UtilityInf), MCAFindBus, $(POS_LSB), $(POS_MSB)

    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
	endif


    ifstr(i) $($R0) != "NO_ERROR"
        set Error = $($R0)
        goto fatal
    endif


    ifstr(i) $($R1) == {}
        set Error = $(CANNOT_FIND_ANY_CARD)
        set CommonStatus = STATUS_USERCANCEL
        set from = "end" 
        goto nonfatal
    endif


	set AdapterList = $($R1)

    ;
    ; Add Software Component
    ;
    ifint $(OldVersionExisted) == $(FALSE)
        ifstr(i) $(!NTN_InstallMode) == "install"
           Ifstr(i) $(DoCopy) == "YES"

              Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES

              Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  Goto ShellCodeError
              Else-Ifstr(i) $($R0) == STATUS_FAILED
                  Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                  ifint $($ShellCode) != $(!SHELL_CODE_OK)
                      goto ShellCodeError
                  endif
                  set Error = $($R0)
                  Goto fatal
              Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                  Goto successful
              Endif

              Set SrcDir = $($R1)

           Endif

           install "Install-Option"
           ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
              Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
              ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  goto ShellCodeError
              endif
              set Error = $($R0)
              goto fatal
           endif
        endif

        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
            $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
            $(NetEventDLL)

        Set OEM_ABANDON_SOFTWARE = TRUE

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        ;
        ;   At this point:
        ;     $R1 contains the product version key handle;
        ;     $R2 contains the NetRules subkey handle;
        ;     $R3 contains the new Services key handle; and
        ;     $R4 contains the Parameters key
        ;     $R5 contains the Linkage Key
        ;
        set RegistryErrorIndex = $($R0)


        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            Debug-Output "Registry error: add software components"
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalregistry
        endif

        Set SoftProductKey    = $($R1)
        Set SoftNetRuleKey    = $($R2)
        Set SoftServiceKey    = $($R3)
        Set SoftParameterKey  = $($R4)
        Set SoftLinkageKey    = $($R5)


        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                            {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                            {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                            {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                            {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                            {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                            {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error."
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            Debug-Output "Registry error: add value list."
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalregistry
        endif

        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                            {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error."
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)

        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            Debug-Output "Registry error: add value list."
            goto fatalregistry
        endif
    endif


;
;
;
;
	ForListDo $(AdapterList)                                 
	    set BusNum = *($($),1)
		set SlotNum = *($($),2)
        Debug-Output "BusNum= "$(BusNum)
        Debug-Output "SlotNum= "$(SlotNum)
        Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
            $(SlotNum), $(ProductHardwareDescription), $(ProductHardwareName) 
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "IsNetCardAlreadyInstalled"
            goto ShellCodeError
        endif
        ifstr $($R0) != "NO_ERROR"
	        set Error = $($R0) 
            goto fatal
        endif

        ifstr(i) $($R1) != "YES"

;
;       Create the HARDWARE\Netcard region and its corresponding service
;

            Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)

            ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
            endif

            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "Cannot add hardware component"
                goto ShellCodeError
            endif

            set RegistryErrorIndex = $($R0)

            Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                EndWait
                Debug-Output "Registry error: add hardware component"
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
            endif

;
;           At this point:
;
;           $R1  Registry key variable for HARDWARE\Netcard\(n)
;           $R2  Registry key variable for HARDWARE\Netcard\(n)\\NetRules
;           $R3  Registry key handle for <service>\Parameters key
;           $R4  Adapter number assigned to adapter
;           $R5  Service name generated by combining svc name with adapter number
;
            set HardNetCardKey    = $($R1)
            set HardNetRuleKey    = $($R2)
            set HardParameterKey  = $($R3)
            set AdapterNumber     = $($R4)
			set SlotTitle         = $(ProductHardwareTitle)$(SlotNum)   
            set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(SlotTitle)},+
                                {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
                                {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                                {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

            Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error"
                goto ShellCodeError
            endif
                 set RadioIn = {1}
                read-syms FileDependentDlg$(!STF_LANGUAGE)
                 SetHelpFile $(!STF_CWDDIR)ibmeniin.hlp 6666 6666
                 Debug-Output "HELP FILE"$(!STF_CWDDIR)ibmeniin.hlp
                ui start "InputDlg"
                ifstr(i) $(DLGEVENT) == "CONTINUE"
                    set NetworkAddress = *($(EditTextOut),1)
                     set FullDuplexIndex = *($(RadioOut),1)
                     Ifint $(FullDuplexIndex) == 2
                        set FDX = "1" 
                     else 
    	                set FDX = "0" 
                     endif
                    ui pop 1
                else
                    set CommonStatus = STATUS_USERCANCEL
                    ui pop 1
                    Debug-Output "Action: unknown. Bye."
                    goto end
                endif
                Shell $(UtilityInf), GetBusTypeNum
                set BusTypeNum = $($R1)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    Debug-Output "ShellCode error."
                    goto ShellCodeError
                endif

;
;           Add the rest of the parameters to the Services area
;	  
            Set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                                {BusType,$(NoTitle),$(!REG_VT_DWORD),3},+
                    	        {McaPosId,$(NoTitle),$(!REG_VT_DWORD),$(MCA_ID)},+
                	            {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
				                {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+
                                {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)}}

            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)

            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
            endif


            set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
            set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)

            set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
                                {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                                {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
                                {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

            
            Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
            
            CloseRegKey $(HardNetCardKey)
            CloseRegKey $(HardNetRuleKey)
            CloseRegKey $(HardParameterKey)
            
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error."
                goto ShellCodeError
            endif
        endif
	EndForListDo

	goto writeparameters

;
;   Write Parameters
;
writeparameters = +
    EndWait
    goto successful

;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter = +
    set Error = "Binding: Not Implemented yet"
    goto fatal

;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        ; Remove Software Component
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif

    goto end

;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------

UpgradeSoftware = +
    ;
    ; First determine whether we want to do upgrade or update for software
    ; or hardware component. Then we will determine whether the Mode is
    ; update or upgrade.
    ;
    ; If the same version of the product existed in the registry, we do
    ; update. Otherwise, we will do a upgrade
    ;
    Debug-Output "UpgradeSoftware: ProductKeyName= "$(ProductKeyName)
    Debug-Output "UpgradeSoftware: !NTN_RegBase  = "$(!NTN_RegBase)

    ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        ; Upgrade software component
        ;
        ; see whether the same version exist or not
        ;
    ;	Debug-Output "REG_H_LOCAL    = "$(!REG_H_LOCAL)
		Debug-Output "ProductKeyName = "$(ProductKeyName)
    ;	Debug-Output "MAXIMUM_ALLOWED= "$(MAXIMUM_ALLOWED)
		Debug-Output "KeyProduct     = "$(KeyProduct)
        
        OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

        Ifstr $(KeyProduct) != $(KeyNull)
            GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
            set Version = *($(VersionInfo), 4)

            ;
            ; Update the binaries
            ;
            Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)

            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "ShellCode error"
                goto ShellCodeError
            endif

            set !UG_Filename = $($R0)

            ifstr(i) $(!UG_Filename) != ""
                install "Install-Update"
                ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                    goto fatal
                endif
            endif

            ; Upgrade the version number
            ;
            SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
            SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}

            ;
            ; do nothing for update
            ;
            ifint $(Version) != $(ProductVersion)
               ;
               ; If the major version number is not the same,
               ;    then this is a major upgrade. 
               ;         So Upgrade the product and
               ;         make other upgrade changes if necessary
               ;
            endif
            CloseRegKey $(KeyProduct)
        else
            ;
            ; Cannot Open software key, goto ERROR
            ;
            goto fatalregistry
        endif
    else
        ;
        ; upgrade/update hardware component
        ; There is no different between upgrade and update for hardware
        ; component
        ;
        ; 1. Get the Service Name
        ; 2. Change the NetRule section if necessary
        ;
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
              $(MAXIMUM_ALLOWED) NetworkCardKey
        Ifstr(i) $(NetworkCardKey) != $(KeyNull)
            ;
            ; Get Service name
            ;
            GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
            set ServiceName = *($(ServiceNameInfo), 4)

            ;
            ; Change the NetRule if necessary
            ;
            OpenRegKey $(NetworkCardKey) "" "NetRules" +
                $(MAXIMUM_ALLOWED) NetRuleKey
            Ifstr(i) $(NetRuleKey) != $(KeyNull)
                ;
                ; Make the change....
                ;
            else
                ;
                ; Error, cannot open net rules key
                ;
                goto fatalregistry
            endif

            CloseRegKey $(NetRules)
            CloseRegKey $(NetworkCardKey)
        else
            ;
            ; Error, cannot open network card key
            ;
            goto fatalregistry
        endif
        ;
        ; 3. Change the service section of the hardware. i.e.,
        ;    ParameterName change, value change, etc.
        ;
        OpenRegKey $(!REG_H_LOCAL) "" +
              $(!NTN_ServiceBase)"\"$(ServiceName) +
              $(MAXIMUM_ALLOWED) ServiceKey

        Ifstr(i) $(ServiceKey) != $(KeyNull)
            ;
            ; Get the ServiceKey to change the Start value
            ; or Type value. Or open Parameters key to
            ; change the hardware parameters if necessary.
            ;
            CloseRegKey $(ServiceKey)
        else
            ;
            ; Error, cannot open network card key
            ;
            goto fatalregistry
        endif
    endif

    goto end
    ;
    ; End of Upgrade Software
    ;

;
;  Escape hatches
;
successful = +
    goto end

abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo

    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        ; Remove Software Component
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)

        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif

    goto end

;
; warning display
;
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
;
; non fatal error display
;
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif

;
;  Registry is broken
;
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
;
; fatal error display
;
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif

    goto setfailed

;
;  Shelling error
;
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed

setfailed = +
    set CommonStatus = STATUS_FAILED
    ;
    ; if OEM_ABANDON_ON == TRUE, then remove the registry entries
    ;
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end

end = +
    goto term

term = +

    Return $(CommonStatus)


;***************************************************************
;  INSTALL SECTIONS
;***************************************************************
[Install-Option]
	Debug-Output "Starting Install-Option"
	Debug-Output "AddCopy= "$(AddCopy)
	Debug-Output "DoCopy= "$(DoCopy)
	Debug-Output "Option= "$(Option)
	Debug-Output "Files-$(Option)= "Files-$(Option)
	Debug-Output "SrcDir= "$(SrcDir)
	Debug-Output "!STF_WINDOWSSYSPATH= "$(!STF_WINDOWSSYSPATH)

    set STF_VITAL = ""

    ifstr(i) $(AddCopy) == "YES"
		Debug-Output "Install-Option: AddCopy=YES"

        ;
        ; Add the files to the copy list
        ;
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
        AddSectionFilesToCopyList Files-HLP $(SrcDir) $(!STF_WINDOWSSYSPATH)

    endif

    ifstr(i) $(DoCopy) == "YES"
		Debug-Output "Install-Option: DoCopy=YES"

       ;
       ; Copy files in the copy list
       ;
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList

    endif



    ifstr(i) $(DoConfig) == "YES"
		Debug-Output "Install-Option: DoConfig=YES"

       ;
       ; Config if needed 
       ;

    endif


	Debug-Output "Install-Option: Preparing to Exit"

    Exit

[Install-Update]
    Debug-Output "Starting Install-Update"
    Debug-Output "Option= "$(Option)
    Debug-Output "SrcDir= "$(SrcDir)
    Debug-Output "!STF_WINDOWSSYSPATH "$(!STF_WINDOWSSYSPATH)

   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"

;
; see line below,  a comment??
;
   ;set STF_VERSION     = "YES"
   ;set STF_VERSION     = "YES"

   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-HLP $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)

   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList

   Exit