;***********************************************************************
;
; OEMSETUP.INF
;
; RNS 2200 PCI FDDI Adapter and driver SETUP INF file.
;
;***********************************************************************
;-----------------------------------------------------------------------
[Identification]
    OptionType=NetAdapter
[PlatformsSupported]
    PCI
[LanguagesSupported]
    ENG
[Options]
    RnsFDDI
[OptionsTextENG]
    RnsFDDI="RNS 2200 PCI FDDI LAN Controller"
[Files-Inf]
1, oemsetup.inf, RENAME=$(!UG_Filename)
[Files-RnsFDDI]
1, rnsfddi.sys
[FileConstants]
UtilityInf      = "UTILITY.INF"
ParamInf        = "NCPARAM.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "RNS"
ProductMajorVersion     = "1"
ProductMinorVersion     = "0"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName     = "RnsFDDI"
ProductSoftwareTitle    = "RNS 2200 PCI FDDI LAN Controller Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\rnsfddi.sys"
NetRuleSoftwareType     = "RnsFDDISys ndisDriver RnsFDDIDriver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """RnsFDDISys"" yes no container"
NetRuleSoftwareClass    = {"RnsFDDIDriver basic"}
NetRuleSoftwareBindable = {"RnsFDDIDriver rnsFDDIAdapter non exclusive 100"}
ProductHardwareName     = "RnsFDDI"
NetRuleHardwareType     = "RnsFDDI RnsFDDIAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"RnsFDDIAdapter basic"}
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle         = 0
ExitState       = "Active"
OldVersionExisted = $(FALSE)
DoGetPCIInfo      = $(TRUE)
DriverPath      = $(!STF_NTPATH)\drivers
Successful_Install = 0

[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[processor]
    PROC_TYPE = "" ? $(LIBHANDLE) GetProcessor

[Identify]
    Debug-Output "At Identify"
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)

[ReturnOptions]
    Debug-Output "At ReturnOptions"
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
            goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
            goto returnoptions
        else
            set Status = STATUS_NOTSUPPORTED
        goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

[InstallOption]
    set Status   = STATUS_FAILED
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    Debug-Output "STF_LANGUAGE is: "$(!STF_LANGUAGE)
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Debug-Output "NTN_InstallMode is: "$(!NTN_InstallMode)
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
        set !G:DebugOutputControl = 1
        set CommonStatus = STATUS_REBOOT
        set StartLabel = configureadapter
        Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
            Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
            ifint $($ShellCode) == $(!SHELL_CODE_OK)
                Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_HARDWARE
            endif
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "Shell error: cannot get an error string."
                goto ShellCodeError
            endif
            set Error = $($R0)
            set from = end
            set to = end
            goto nonfatalinfo
        endif
    else
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
    endif
    Debug-Output "NTN_Origination"$(!NTN_Origination)
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)

installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
            Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle), $(ProductVersion)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "Shell error: VerExistDlg."
                goto ShellCodeError
            endif
            goto end
        endif

        Shell $(UtilityInf), CardExistedDlg
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "Shell error: CardExistDlg."
            goto ShellCodeError
        endif
        ifstr(i) $($R1) != "OK"
            set CommonStatus = STATUS_USERCANCEL
            goto end
        endif
        set OldVersionExisted = $(TRUE)
    endif
    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    Ifstr(i) $($R0) == STATUS_FAILED
        Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
        goto fatal
    endif
    Ifstr(i) $($R0) == STATUS_USERCANCEL
        Goto successful
    Endif
    Set SrcDir = $($R1)
    install "Install-Option"
    Goto adapteroptions

configureadapter = +
    Debug-Output "At configureadapter"
    Ifstr $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
            Debug-Output "Cannot find component product key"
            goto fatalregistry
        endif
    endif
    Debug-Output "At FindService: "$(KeyProduct)
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "Shell error: FindService."
        Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
        Debug-Output "FindService error: "$($R0)
        Goto fatalregistry
    endif
    Set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        Debug-Output "Cannot find component service"
        goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set DoGetPCIInfo      = $(FALSE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        Ifstr(i) $(ValueName) == "BusNumber"
            set BusNumValue = $(ValueData)
            Debug-Output "Registry BusNumber: "$(BusNumValue)
        else-ifstr(i) $(ValueName) == "SlotNumber"
            set SlotNumValue = $(ValueData)
            Debug-Output "Registry SlotNumber: "$(SlotNumValue)
        endif
    EndForListDo
    Set Caption = $(FunctionTitle)
    ifstr(i) $(SlotNumValue) == ""
        set SlotNumValue = *($(SlotNumList), 1)
        Debug-Output "Setting Default SlotNumber: "$(SlotNumValue)
    endif
    ifstr(i) $(BusNumValue) == ""
        set BusNumValue = *($(BusNumList), 1)
        Debug-Output "Setting Default BusNumber: "$(BusNumValue)
    endif

    set SlotNumValue = *($(SlotNumList), ~($(SlotNumValues),$(SlotNumValue)))
    set BusNumValue = *($(BusNumList), ~($(BusNumValues),$(BusNumValue)))

adapteroptions = +
    StartWait
installproduct = +
    Debug-Output "At installproduct"
    set from = installproduct

    ifint $(DoGetPCIInfo) == $(TRUE)
        goto getpciinformation
    endif

    read-syms FileDependent1Dlg$(!STF_LANGUAGE)
    ui start "InputDlg"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        set SlotNumValue = $(Combo1Out)
        ui pop 1
        read-syms FileDependent2Dlg$(!STF_LANGUAGE)
        ui start "InputDlg"
        ifstr(i) $(DLGEVENT) == "CONTINUE"
            set BusNumValue = $(Combo1Out)
            ui pop 1
            set SlotNumValue = *($(SlotNumValues),~($(SlotNumList),$(SlotNumValue)))
            set BusNumValue = *($(BusNumValues),~($(BusNumList),$(BusNumValue)))
            set AdapterList = {{$(BusNumValue), $(SlotNumValue), 0}}
            goto continueinstall
        endif
    endif
    ui pop 1
    ui pop 1
    goto setfailed

getpciinformation = +
    set Vendor = 4370
    set CFID = 8704
    Debug-Output "GetPCIInfo: "$(Vendor)
    Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CFID)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R0) == {}
        set Error = $(CANNOT_FIND_ANY_CARD)
        set CommonStatus = STATUS_USERCANCEL
        set from = end
        goto nonfatal
    endif
    set AdapterList = $($R0)
    set NewAdapterList = {}
    set NumNew = 0
    ForListDo $(AdapterList)
        set BusNum = *($($),1)
        set SlotNum = *($($),2)
        Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
            $(SlotNum), $(ProductHardwareDescription), $(ProductHardwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        ifstr(i) $($R1) != "YES"
            set-add NumNew = $(NumNew),1
            ifstr(i) $(NewAdapterList) == {}
                set NewAdapterList = {$($)}
            else
                set NewAdapterList = >($(NewAdapterList),$($))
            endif
        endif
    EndForListDo
    ifint $(NumNew) == 0
        set Error = $(CANNOT_FIND_NEW_CARD)
        set CommonStatus = STATUS_USERCANCEL
        set from = end
        goto nonfatal
    endif
    set AdapterList = $(NewAdapterList)

continueinstall = +
    ifint $(OldVersionExisted) == $(FALSE)
        ifstr(i) $(!NTN_InstallMode) == "install"
            Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
                    $(ProductSoftwareName), +
                    $(ProductSoftwareName), +
                    $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
                    $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
                    $(NetEventDLL)
            set OEM_ABANDON_SOFTWARE = TRUE
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "Shell error: AddSoftwareComponent"
                goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            set KeyProduct      = $($R1)
            Set SoftNetRulesKey = $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Registry error: AddSoftwareComponent"
                CloseRegKey $(KeyProduct)
                CloseRegKey $(SoftNetRulesKey)
                goto fatalregistry
            endif
            set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                                {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                                {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                                {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                                {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                                {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                                {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
            Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "Shell error: AddValueList"
                goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Registry error: AddValueList"
                CloseRegKey $(KeyProduct)
                CloseRegKey $(SoftNetRulesKey)
                goto fatalregistry
            endif
            set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                                {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                                {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                                {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                                {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
                                {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
            Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "Shell error: AddValueList"
                goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            CloseRegKey $(KeyProduct)
            CloseRegKey $(SoftNetRulesKey)
            Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
                EndWait
                Debug-Output "Registry error: AddValueList"
                goto fatalregistry
            endif
        endif
    endif

    Debug-Output "AdapterList: "$(AdapterList)
    ForListDo $(AdapterList)
        set BusNum = *($($),1)
        set DeviceNum = *($($),2)
        set FunctionNum = *($($),3)

        ifstr(i) $(!NTN_InstallMode) == "configure"
            goto writeparameters
        endif

        Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
        ifint $($R4) != -1
            Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
        endif
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "Shell error: AddHardwareComponent"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "Registry error: AddHardwareComponent"
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            goto fatalregistry
        endif
        set KeyParameters = $($R3)
        set KeyAdapterRules = $($R2)
        set AdapterNumber = $($R4)
        set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                            {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareDescription)},+
                            {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
                            {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                            {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                            {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "Shell error: AddValueList"
            goto ShellCodeError
        endif
        CloseRegKey $($R1)
        set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
        set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "Shell error: AddValueList"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output "Registry error: AddValueList"
            CloseRegKey $(KeyParameters)
            CloseRegKey $(KeyAdapterRules)
            goto fatalregistry
        endif
        CloseRegKey $(KeyAdapterRules)

writeparameters = +
        set NewValueList = {{CardType,$(NoTitle),$(!REG_VT_DWORD),5},+
                            {BusType,$(NoTitle),$(!REG_VT_DWORD),5},+
                            {MediaType,$(NoTitle),$(!REG_VT_DWORD),3},+
                            {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                            {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),570429714},+
                            {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                            {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNumber)}}
        Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
        ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
            Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
        endif
        CloseRegKey $(KeyParameters)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "Shell error: AddValueList"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            Debug-Output "Registry error: AddValueList"
            goto fatalregistry
        endif
    EndForListDo
    EndWait
    goto successful

bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented"
    goto fatal

removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
                $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "Shell error: RemoveSoftwareComponent"
            goto ShellCodeError
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
                $(ProductSoftwareName), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "Shell error: RemoveHardwareComponent"
            goto ShellCodeError
        endif
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
    goto end

UpgradeSoftware = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "Shell error: GetInfFileNameFromRegistry"
            goto ShellCodeError
        endif
        set !UG_Filename = $($R0)
        install "Install-Update"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            goto fatal
        endif
        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
        CloseRegKey $(KeyProduct)
    else
        goto fatalregistry
    endif
    goto end

successful = +
    goto end

abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
                $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "Shell error: RemoveHardwareComponent"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
                $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "Shell error: RemoveSoftwareComponent"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end

warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto end
    endif

nonfatalinfo = +
    set Severity = STATUS
    set CommonStatus = STATUS_USERCANCEL
    goto nonfatalmsg

nonfatal = +
    set Severity = NONFATAL
    goto nonfatalmsg

nonfatalmsg = +
    ifstr(i) $(Error) == ""
        set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto end
    endif

fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal

fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed

ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = "Error: "$(FunctionTitle)
    set STF_MB_TEXT  = "Shell Code Error"
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed

setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end

end = +
    goto term

term = +
    Return $(CommonStatus)

[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
        set !STF_NCPA_FLUSH_COPYLIST = TRUE
        CopyFilesInCopyList
    endif
    exit

[Install-Update]
    set STF_VITAL        = ""
    set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
    AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    exit

[Source Media Descriptions]
;    1 = "RNS 2200 PCI FDDI Driver Disk"
     1 = "Windows NT DRVLIB"

[Signature]
    FileType = MICROSOFT_DRVLIB_FILE
[GetSignature]
    read-syms Signature
    return $(FileType)

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
	       "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
CANNOT_FIND_NEW_CARD = "All RNS 2200 adapters have been installed"
;
; Product Info
;
FunctionTitle = "RNS 2200 PCI FDDI LAN Controller Setup"
;
; Software
;
ProductSoftwareDescription = "RNS 2200 PCI FDDI LAN Controller Driver"
;
; Hardware
;
ProductHardwareDescription = "RNS 2200 PCI FDDI LAN Controller"
;
; Dialog Message Information
;
BusNumList = ^(BusNumChoices, 1)
BusNumValues = ^(BusNumChoices, 2)
SlotNumList = ^(SlotNumChoices, 1)
SlotNumValues = ^(SlotNumChoices, 2)
[BusNumChoices]
BusNum_1  = "0",0
BusNum_2  = "1",1
BusNum_3  = "2",2
BusNum_4  = "3",3
[SlotNumChoices]
SlotNum_1  = "AutoDetect",32
SlotNum_2  = "0",0
SlotNum_3  = "1",1
SlotNum_4  = "2",2
SlotNum_5  = "3",3
SlotNum_6  = "4",4
SlotNum_7  = "5",5
SlotNum_8  = "6",6
SlotNum_9  = "7",7
SlotNum_10 = "8",8
SlotNum_11 = "9",8
;
; Input DIALOGS
;
[FileDependent1DlgENG]
DlgType = "RadioCombination"
DlgTemplate = "SINGLE_COMBO"
Caption = $(FunctionTitle)
Label1 = "&Slot Number:"
Combo1List = $(SlotNumList)
Combo1Out  = $(SlotNumValue)
ComboListItemsIn  = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
HelpContext = $(!IDH_DB_OEMNADIN_INS)
[FileDependent2DlgENG]
DlgType = "RadioCombination"
DlgTemplate = "SINGLE_COMBO"
Caption = $(FunctionTitle)
Label1 = "&Bus Number:"
Combo1List = $(BusNumList)
Combo1Out  = $(BusNumValue)
ComboListItemsIn  = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
HelpContext = $(!IDH_DB_OEMNADIN_INS)
[DialogConstantsENG]
;
; Common button names, etc.
;
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"