;
; 03/23/94 v1.00a
;
; Windows NT 3.1 .inf file
;
; SMC EISA EtherCard Elite32 setup for 82M32 adapter
;

[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    EISA
	"Jazz-Internal Bus"
[Options]
    SMC8232
[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
;NE3200_1BYTE   = 511034
;SMCEBM_1BYTE   = 8430413
SMC8232_1BYTE   = 8430413

Manufacturer    = "SMC"
ProductMajorVersion     = "1"
ProductMinorVersion     = "0"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName     = "SMC8232"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\smc8232n.sys"
NetRuleSoftwareType     = "smc8232Sys ndisDriver smc8232Driver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """smc8232Sys"" yes no container"
NetRuleSoftwareClass    = {"smc8232Driver basic"}
NetRuleSoftwareBindable = {"smc8232Driver smc8232Adapter non exclusive 100"}
ProductHardwareName     = "SMC8232"
NetRuleHardwareType     = "smc8232 smc8232Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"smc8232Adapter basic"}
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 99, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
	ifstr(i) $($1) == ""
	   goto returnoptions
	endif
	set PlatformList = ^(PlatformsSupported, 1)
	Ifcontains(i) $($1) in $(PlatformList)
	   goto returnoptions
	else
	   set Status = STATUS_NOTSUPPORTED
	   goto finish_ReturnOptions
	endif
    else
	set Status = STATUS_NOLANGUAGE
	goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
	Return STATUS_NOLANGUAGE
    endif
    Debug-Output "OEMNADNE.INF: STF_CWDIR is: "$(!STF_CWDIR)
    Debug-Output "OEMNADNE.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
	set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
	set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
	set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
	set CommonStatus = STATUS_REBOOT
	Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	    Debug-Output "Cannot configure the SMC EBM driver software."
	    Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
	else
	    Debug-Output "Cannot configure the SMC EBM adapter card."
	    Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_HARDWARE
	endif
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error: cannot get an error string."
	    goto ShellCodeError
	endif
	set Error = $($R0)
	set from = end
	set to = end
	goto nonfatalinfo
    else
	set StartLabel = installadapter
	set OEM_ABANDON_OPTIONS = {}
	set OEM_ABANDON_SOFTWARE = FALSE
	set OEM_ABANDON_ON = TRUE
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	CloseRegKey $(KeyProduct)
	ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
	   Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
	       $(ProductVersion)
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "ShellCode error: cannot get an error string."
	       goto ShellCodeError
	   endif
	   goto end
	else
	   Shell $(UtilityInf), CardExistedDlg
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Debug-Output "ShellCode error: cannot get an error string."
	       goto ShellCodeError
	   endif
	   ifstr(i) $($R1) != "OK"
	       set CommonStatus = STATUS_USERCANCEL
	       goto end
	   endif
	   set OldVersionExisted = $(TRUE)
	endif
    endif
    CloseRegKey $(KeyProduct)
    goto nextstep
configureadapter = +
    set Error = "Configure: Sorry, not yet implemented."
    goto fatal
nextstep = +
    StartWait
    Shell $(UtilityInf), EISAFindBus, $(SMC8232_1BYTE)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr $($R0) != "NO_ERROR"
	set Error = $($R0)
	goto fatal
    endif
    ifstr(i) $($R1) == {}
	set Error = $(CANNOT_FIND_ANY_CARD)
	set CommonStatus = STATUS_USERCANCEL
	set from = "end"
	goto nonfatal
    endif
    set AdapterList = $($R1)
    ifint $(OldVersionExisted) == $(FALSE)
	ifstr(i) $(!NTN_InstallMode) == "install"
	   Ifstr(i) $(DoCopy) == "YES"
	      Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
	      Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		  Goto ShellCodeError
	      Else-Ifstr(i) $($R0) == STATUS_FAILED
		  Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
		  ifint $($ShellCode) != $(!SHELL_CODE_OK)
		      goto ShellCodeError
		  endif
		  set Error = $($R0)
		  Goto fatal
	      Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
		  Goto successful
	      Endif
	      Set SrcDir = $($R1)
	   Endif
	   install "Install-Option"
	   ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	      Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
	      ifint $($ShellCode) != $(!SHELL_CODE_OK)
		  goto ShellCodeError
	      endif
	      set Error = $($R0)
	      goto fatal
	   endif
	endif
	Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
	    $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
	    $(NetEventDLL)
	Set OEM_ABANDON_SOFTWARE = TRUE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    CloseRegKey $($R1)
	    CloseRegKey $($R2)
	    CloseRegKey $($R3)
	    CloseRegKey $($R4)
	    CloseRegKey $($R5)
	    goto fatalregistry
	endif
	set SoftProductKey      = $($R1)
	Set SoftNetRuleKey      = $($R2)
	Set SoftServiceKey      = $($R3)
	Set SoftParameterKey    = $($R4)
	Set SoftLinkageKey      = $($R5)
	set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
			   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
			   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
			   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
			   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
			   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
			   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
	Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    CloseRegKey $(SoftProductKey)
	    CloseRegKey $(SoftNetRuleKey)
	    CloseRegKey $(SoftServiceKey)
	    CloseRegKey $(SoftParameterKey)
	    CloseRegKey $(SoftLinkageKey)
	    goto fatalregistry
	endif
	set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
			    {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
			    {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
			    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
			    {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
			    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
	Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	CloseRegKey $(SoftProductKey)
	CloseRegKey $(SoftNetRuleKey)
	CloseRegKey $(SoftServiceKey)
	CloseRegKey $(SoftParameterKey)
	CloseRegKey $(SoftLinkageKey)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    goto fatalregistry
	endif
    endif
    ForListDo $(AdapterList)
	set BusNum = *($($),1)
	set SlotNum = *($($),2)
	Debug-Output $(BusNum)
	Debug-Output $(SlotNum)
	Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
	    $(SlotNum), $(ProductHardwareDescription), $(ProductHardwareName)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	ifstr $($R0) != "NO_ERROR"
	    set Error = $($R0)
	    goto fatal
	endif
	ifstr(i) $($R1) != "YES"
		Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
		ifint $($R4) != -1
		    Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
		endif
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
		    goto ShellCodeError
		endif
		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
		    EndWait
		    CloseRegKey $($R1)
		    CloseRegKey $($R2)
		    CloseRegKey $($R3)
		    goto fatalregistry
		endif
		Set HardNetCardKey      = $($R1)
		Set HardNetRuleKey      = $($R2)
		Set HardParameterKey    = $($R3)
		set AdapterNumber       = $($R4)
		set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
				   {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
				   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
				   {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
				   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
				   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
		Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
		    goto ShellCodeError
		endif
		set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
				   {BusType,$(NoTitle),$(!REG_VT_DWORD),2},+
				   {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
				   {EisaCompressedId,$(NoTitle),$(!REG_VT_DWORD),$(SMC8232_1BYTE)},+
				   {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)}}
		Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
		    goto ShellCodeError
		endif
		 set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
		 set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
		 set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
				     {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
				     {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
				     {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
		Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
		CloseRegKey $(HardNetCardKey)
		CloseRegKey $(HardNetRuleKey)
		CloseRegKey $(HardParameterKey)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
		    goto ShellCodeError
		endif
	endif
    EndForListDo
    goto writeparameters
writeparameters = +
    EndWait
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    else
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $(!NTN_RegBase)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end
UpgradeSoftware = +
    ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
	Ifstr $(KeyProduct) != $(KeyNull)
	    GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
	    set Version = *($(VersionInfo), 4)
	    Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error"
		goto ShellCodeError
	    endif
	    set !UG_Filename = $($R0)
	    ifstr(i) $(!UG_Filename) != ""
		install "Install-Update"
		ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
		    goto fatal
		endif
	    endif
	    SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
	    SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
	    ifint $(Version) != $(ProductVersion)
	    endif
	    CloseRegKey $(KeyProduct)
	else
	    goto fatalregistry
	endif
    else
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
	      $(MAXIMUM_ALLOWED) NetworkCardKey
	Ifstr(i) $(NetworkCardKey) != $(KeyNull)
	    GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
	    set ServiceName = *($(ServiceNameInfo), 4)
	    OpenRegKey $(NetworkCardKey) "" "NetRules" +
		$(MAXIMUM_ALLOWED) NetRuleKey
	    Ifstr(i) $(NetRuleKey) != $(KeyNull)
	    else
		goto fatalregistry
	    endif
	    CloseRegKey $(NetRules)
	    CloseRegKey $(NetworkCardKey)
	else
	    goto fatalregistry
	endif
	OpenRegKey $(!REG_H_LOCAL) "" +
	      $(!NTN_ServiceBase)"\"$(ServiceName) +
	      $(MAXIMUM_ALLOWED) ServiceKey
	Ifstr(i) $(ServiceKey) != $(KeyNull)
	    CloseRegKey $(ServiceKey)
	else
	    goto fatalregistry
	endif
    endif
    goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $($)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), FALSE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
	goto $(from)
    else
	goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
	Set Severity = NONFATAL
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(from)
    else
	goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
	set OEM_ABANDON_ON = FALSE
	goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
	AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit
[Source Media Descriptions]
;    1  = "Windows NT Setup Disk #1"  , TAGFILE = disk1
;    2  = "Windows NT Setup CD-ROM Disk"  , TAGFILE = disk2
     99 = "SMC SUPER DISK " 

[Signature]
    FileType = MICROSOFT_DRVLIB_FILE
[GetSignature]
    read-syms Signature
    return $(FileType)

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
[Files-Inf]
99,     oemsetup.inf,    SIZE=1000,     RENAME=$(!UG_Filename)
[Files-SMC8232]
99,SMC8232N.SYS , SIZE=38400
[LanguagesSupported]
    ENG
[OptionsTextENG]
    SMC8232     = "SMC EISA EtherCard Elite32 Ultra (82M32)"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
	       "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "SMC Adapter Card Setup"
ProductSoftwareDescription      = "SMC EtherCard Elite32 Driver"
ProductHardwareDescription      = "SMC EISA EtherCard Elite32 Ultra (82M32)"
CANNOT_FIND_ANY_CARD            = "Network card is not present in the system"
ProductSoftwareTitle    = "SMC EtherCard Elite32 Driver"
ProductHardwareTitle    = "SMC EISA EtherCard Elite32 Ultra (82M32)"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
[FileDependentDlgENG]