;*********************************************************************** ; ; OEMSETUP.INF ; ; Intel network card and driver SETUP INF file. ; ;*********************************************************************** ;----------------------------------------------------------------------- ; OPTION TYPE ; ----------- ; This identifies the Option type we are dealing with. The different ; possible types are: ; ; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ... ; ; Types specific to networking: ; ; NetAdapter, a netcard / adapter combination or just a netcard ; NetDriver, just a netcard driver ; NetTransport, a complete NDIS-compliant TDI transport stack ; NetService, an NT networking service ; NetWork, a complete network ensemble. ; NetProvider a complete network which supports NT MPR protocol ;----------------------------------------------------------------------- [Identification] OptionType = NetAdapter ;----------------------------------------------------------------------- ; PlatformsSupported ; ------------------ ; This identifies the platforms supported by the adapter card. ; Possible types are: ; ; ISA and EISA ;----------------------------------------------------------------------- [PlatformsSupported] ISA EISA MCA "Jazz-Internal Bus" PCMCIA PCI [LanguagesSupported] ENG ;----------------------------------------------------------------------- ; OPTION LIST ; ----------- ; This section lists the OEM Option key names. These keys are locale ; independent and used to represent the option in a locale independent ; manner. ; ;----------------------------------------------------------------------- [Options] TKXP16 ;PCMCIA ;COMBO [OptionsTextENG] TKXP16 = "Intel TokenExpress 16/4 Adapter" ;PCMCIA = "Olicom GoCard TR 16/4" ;COMBO = "Olicom GoCard TR/Modem 144" [IOBaseAddrChoices] IOBase_0 = "Auto detect", 0 IOBase_1 = "0A00-0A1F", 2560 IOBase_2 = "0A20-0A3F", 2592 IOBase_3 = "0A40-0A5F", 2624 IOBase_4 = "0A60-0A7F", 2656 IOBase_5 = "0A80-0A9F", 2688 IOBase_6 = "0AA0-0ABF", 2720 IOBase_7 = "0AC0-0ADF", 2752 IOBase_8 = "0AE0-0AFF", 2874 IOBase_9 = "0B00-0B1F", 2816 IOBase_10 = "0B20-0B3F", 2848 IOBase_11 = "0B40-0B5F", 2880 IOBase_12 = "0B60-0B7F", 2912 IOBase_13 = "0B80-0B9F", 2944 IOBase_14 = "0BA0-0BBF", 2976 IOBase_15 = "0BC0-0BDF", 3008 IOBase_16 = "0BE0-0BFF", 3040 IOBase_20 = "0A20-0A23,0A30-0A3F", 2592 IOBase_21 = "0A24-0A27,0A40-0A4F", 2596 IOBase_22 = "0A50-0A53,0A60-0A6F", 2640 IOBase_23 = "0A54-0A57,0A70-0A7F", 2644 [ReceiveBufferCountChoices] RBC_1 = "32",32 RBC_2 = "31",31 RBC_3 = "30",30 RBC_4 = "29",29 RBC_5 = "28",28 RBC_6 = "27",27 RBC_7 = "26",26 RBC_8 = "25",25 RBC_9 = "24",24 RBC_10 = "23",23 RBC_11 = "22",22 RBC_12 = "21",21 RBC_13 = "20",20 RBC_14 = "19",19 RBC_15 = "18",18 RBC_16 = "17",17 RBC_17 = "16",16 RBC_18 = "15",15 RBC_19 = "14",14 RBC_20 = "13",13 RBC_21 = "12",12 RBC_22 = "11",11 RBC_23 = "10",10 RBC_24 = "9",9 RBC_25 = "8",8 RBC_26 = "7",7 RBC_27 = "6",6 RBC_28 = "5",5 [TransmitBufferCountChoices] XBC_1 = "32",32 XBC_2 = "31",31 XBC_3 = "30",30 XBC_4 = "29",29 XBC_5 = "28",28 XBC_6 = "27",27 XBC_7 = "26",26 XBC_8 = "25",25 XBC_9 = "24",24 XBC_10 = "23",23 XBC_11 = "22",22 XBC_12 = "21",21 XBC_13 = "20",20 XBC_14 = "19",19 XBC_15 = "18",18 XBC_16 = "17",17 XBC_17 = "16",16 XBC_18 = "15",15 XBC_19 = "14",14 XBC_20 = "13",13 XBC_21 = "12",12 XBC_22 = "11",11 XBC_23 = "10",10 XBC_24 = "9",9 XBC_25 = "8",8 XBC_26 = "7",7 XBC_27 = "6",6 XBC_28 = "5",5 XBC_29 = "4",4 XBC_30 = "3",3 XBC_31 = "2",2 [MaxFrameSizeChoices] MFS_1 = "8 KBytes",8192 MFS_2 = "6 KBytes",6144 MFS_3 = "4 KBytes",4096 MFS_4 = "2 KBytes",2048 [BusNumberChoices] BusNo_1 = "0",0 BusNo_2 = "1",1 BusNo_3 = "2",2 BusNo_4 = "3",3 BusNo_5 = "4",4 BusNo_6 = "5",5 BusNo_7 = "6",6 BusNo_8 = "7",7 [IOBasePCMCIAChoices] ; 3E0h is where PCIC is (normally) located ; 240h is where TCIC is (normally) located ; therefore user cannot select these for locating the adapter IOBase_1 = "200h",512 IOBase_2 = "220h",544 IOBase_3 = "260h",608 IOBase_4 = "280h",640 IOBase_5 = "2A0h",672 IOBase_6 = "2C0h",714 IOBase_7 = "2E0h",746 IOBase_8 = "300h",768 IOBase_9 = "320h",800 IOBase_10 = "340h",832 IOBase_11 = "360h",864 IOBase_12 = "380h",896 IOBase_13 = "3A0h",928 IOBase_14 = "3C0h",960 IOBase_15 = "A00h",2560 IOBase_16 = "A20h",2592 IOBase_17 = "A40h",2624 IOBase_18 = "A60h",2656 IOBase_19 = "A80h",2688 IOBase_20 = "AA0h",2720 IOBase_21 = "AC0h",2752 IOBase_22 = "AE0h",2784 IOBase_23 = "B00h",2816 IOBase_24 = "B20h",2848 IOBase_25 = "B40h",2880 IOBase_26 = "B60h",2912 IOBase_27 = "B80h",2944 IOBase_28 = "BA0h",2976 IOBase_29 = "BC0h",3008 IOBase_30 = "BE0h",3040 [MemWinChoices] MemWin_1 = "A0000h", 655360 MemWin_2 = "A1000h", 659456 MemWin_3 = "A2000h", 663552 MemWin_4 = "A3000h", 667648 MemWin_5 = "A4000h", 671744 MemWin_6 = "A5000h", 675840 MemWin_7 = "A6000h", 679936 MemWin_8 = "A7000h", 684032 MemWin_9 = "A8000h", 688128 MemWin_10 = "A9000h", 692224 MemWin_11 = "AA000h", 696320 MemWin_12 = "AB000h", 700416 MemWin_13 = "AC000h", 704512 MemWin_14 = "AD000h", 708608 MemWin_15 = "AE000h", 712704 MemWin_16 = "AF000h", 716800 MemWin_17 = "B0000h", 720896 MemWin_18 = "B1000h", 724992 MemWin_19 = "B2000h", 729088 MemWin_20 = "B3000h", 733184 MemWin_21 = "B4000h", 737280 MemWin_22 = "B5000h", 741376 MemWin_23 = "B6000h", 745472 MemWin_24 = "B7000h", 749568 MemWin_25 = "B8000h", 753664 MemWin_26 = "B9000h", 757760 MemWin_27 = "BA000h", 761856 MemWin_28 = "BB000h", 765952 MemWin_29 = "BC000h", 770048 MemWin_30 = "BD000h", 774144 MemWin_31 = "BE000h", 778240 MemWin_32 = "BF000h", 782336 MemWin_33 = "C0000h", 786432 MemWin_34 = "C1000h", 790528 MemWin_35 = "C2000h", 794624 MemWin_36 = "C3000h", 798720 MemWin_37 = "C4000h", 802816 MemWin_38 = "C5000h", 806912 MemWin_39 = "C6000h", 811008 MemWin_40 = "C7000h", 815104 MemWin_41 = "C8000h", 819200 MemWin_42 = "C9000h", 823296 MemWin_43 = "CA000h", 827392 MemWin_44 = "CB000h", 831488 MemWin_45 = "CC000h", 835584 MemWin_46 = "CD000h", 839680 MemWin_47 = "CE000h", 843776 MemWin_48 = "CF000h", 847872 MemWin_49 = "D0000h", 851968 MemWin_50 = "D1000h", 856064 MemWin_51 = "D2000h", 860160 MemWin_52 = "D3000h", 864256 MemWin_53 = "D4000h", 868352 MemWin_54 = "D5000h", 872448 MemWin_55 = "D6000h", 876544 MemWin_56 = "D7000h", 880640 MemWin_57 = "D8000h", 884736 MemWin_58 = "D9000h", 888832 MemWin_59 = "DA000h", 892928 MemWin_60 = "DB000h", 897024 MemWin_61 = "DC000h", 901120 MemWin_62 = "DD000h", 905216 MemWin_63 = "DE000h", 909312 MemWin_64 = "DF000h", 913408 MemWin_65 = "E0000h", 917504 MemWin_66 = "E1000h", 921600 MemWin_67 = "E2000h", 925696 MemWin_68 = "E3000h", 929792 MemWin_69 = "E4000h", 933888 MemWin_70 = "E5000h", 937984 MemWin_71 = "E6000h", 942080 MemWin_72 = "E7000h", 946176 MemWin_73 = "E8000h", 950272 MemWin_74 = "E9000h", 954368 MemWin_75 = "EA000h", 958464 MemWin_76 = "EB000h", 962560 MemWin_77 = "EC000h", 966656 MemWin_78 = "ED000h", 970752 MemWin_79 = "EE000h", 974848 MemWin_80 = "EF000h", 978944 MemWin_81 = "F0000h", 983040 MemWin_82 = "F1000h", 987136 MemWin_83 = "F2000h", 991232 MemWin_84 = "F3000h", 995328 MemWin_85 = "F4000h", 999424 MemWin_86 = "F5000h", 1003520 MemWin_87 = "F6000h", 1007616 MemWin_88 = "F7000h", 1011712 MemWin_89 = "F8000h", 1015808 MemWin_90 = "F9000h", 1019904 MemWin_91 = "FA000h", 1024000 MemWin_92 = "FB000h", 1028096 MemWin_93 = "FC000h", 1032192 MemWin_94 = "FD000h", 1036288 MemWin_95 = "FE000h", 1040384 MemWin_96 = "FF000h", 1044480 [InterruptChoices] Interrupt_1 = "3", 3 Interrupt_2 = "4", 4 Interrupt_3 = "5", 5 Interrupt_4 = "7", 7 Interrupt_5 = "9", 9 Interrupt_6 = "10",10 Interrupt_7 = "11",11 Interrupt_8 = "12",12 Interrupt_9 = "14",14 Interrupt_10 = "15",15 [ComPortChoices] Com_1 = "COM1", 1016 Com_2 = "COM2", 760 Com_3 = "COM3", 1000 Com_4 = "COM4", 744 Com_5 = "COM5", 24 Com_6 = "Disabled", 0 [IOBasePCMCIAControllerChoices] IOBase_1 = "Default",992 IOBase_2 = "3E2h",994 IOBase_3 = "Disable PCMCIA",0 [WaitstateChoices] Waitstate_1 = "0", 0 Waitstate_2 = "1", 1 Waitstate_3 = "2", 2 Waitstate_4 = "3", 3 Waitstate_5 = "4", 4 Waitstate_6 = "5", 5 Waitstate_7 = "6", 6 Waitstate_8 = "7", 7 Waitstate_9 = "8", 8 Waitstate_10 = "9", 9 Waitstate_11 = "10",10 Waitstate_12 = "11",11 Waitstate_13 = "12",12 Waitstate_14 = "13",13 Waitstate_15 = "14",14 Waitstate_16 = "15",15 [DatasizeChoices] Datasize_1 = 1, 1,"&16 Bit" Datasize_2 = 2, 0,"&8 Bit" [RingSpeedChoices] RS_1 = "16 Mbps", 16 RS_2 = "4 Mbps", 4 ;----------------------------------------------------------------------- ; Constants for use with dialogs ;----------------------------------------------------------------------- [FileConstants] UtilityInf = "UTILITY.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 DialogDllName = "octk16.dll" HelpfileName = "octk16.hlp" NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\Drivers\Octk16.sys" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "Intel" ProductMajorVersion = "3" ProductMinorVersion = "23" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "tkxp16" ProductSoftwareTitle = "Intel TokenExpress 16/4 Adapter Driver" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\octk16.sys" NetRuleSoftwareType = "tkxp16Sys ndisDriver tkxp16Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """tkxp16Sys"" yes no container" NetRuleSoftwareClass = {"tkxp16Driver basic"} NetRuleSoftwareBindable = {"tkxp16Driver tkxp16Adapter non exclusive 100"} ProductHardwareName = "tkxp16" ProductHardwareTKXP16Title = "Intel TokenExpress 16/4 Adapter" ProductHardwarePCMCIATitle = "Olicom GoCard TR 16/4" ProductHardwareCOMBOTitle = "Olicom GoCard TR/Modem 144" NetRuleHardwareType = "tkxp16 tkxp16Adapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"tkxp16Adapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" TKXP16FunctionTitle = "Intel TokenExpress 16/4 Adapter Setup" PCMCIAFunctionTitle = "Olicom GoCard TR 16/4 Setup" COMBOFunctionTitle = "Olicom GoCard TR/Modem 144 Setup" ProductHardwareTKXP16Description = "Intel TokenExpress 16/4 Adapter" ProductHardwarePCMCIADescription = "Olicom GoCard TR 16/4" ProductHardwareCOMBODescription = "Olicom GoCard TR/Modem 144" ProductSoftwareDescription = "Intel TokenExpress Adapter Driver" FunctionTitle = $($(Option)FunctionTitle) IOBaseAddrList = ^(IOBaseAddrChoices, 1) IOBaseAddrValues = ^(IOBaseAddrChoices, 2) RcvBufCountList = ^(ReceiveBufferCountChoices, 1) RcvBufCountValues = ^(ReceiveBufferCountChoices, 2) XmitBufCountList = ^(TransmitBufferCountChoices, 1) XmitBufCountValues = ^(TransmitBufferCountChoices, 2) FrameSizeList = ^(MaxFrameSizeChoices, 1) FrameSizeValues = ^(MaxFrameSizeChoices, 2) BusNoList = ^(BusNumberChoices, 1) BusNoValues = ^(BusNumberChoices, 2) IOBasePCMCIAList = ^(IOBasePCMCIAChoices, 1) IOBasePCMCIAValues = ^(IOBasePCMCIAChoices, 2) MemWinList = ^(MemWinChoices, 1) MemWinValues = ^(MemWinChoices, 2) InterruptList = ^(InterruptChoices, 1) InterruptValues = ^(InterruptChoices, 2) RingSpeedList = ^(RingSpeedChoices, 1) RingSpeedValues = ^(RingSpeedChoices, 2) ComPortList = ^(ComPortChoices, 1) ComPortValues = ^(ComPortChoices, 2) IOBasePCMCIAControllerList = ^(IOBasePCMCIAControllerChoices, 1) IOBasePCMCIAControllerValues = ^(IOBasePCMCIAControllerChoices, 2) WaitstateList = ^(WaitstateChoices, 1) WaitstateValues = ^(WaitstateChoices, 2) DatasizeList = ^(DatasizeChoices, 1) DatasizeValues = ^(DatasizeChoices, 2) DatasizeLabels = ^(DatasizeChoices, 3) IOBasePCMCIADefault = 15 MemWinDefault = 49 ComPortDefault = 3 InterruptDefault = 3 [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" ContextMinimumID = 6000 ContextContentsID = 6000 ContextPCMCIASetupID = 6001 ContextPCMCIAAdvancedID = 6002 ContextMaximumID = 6020 [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [AskSourceDlgText] DlgText = "Please enter the full path of the Intel TokenExpress 16/4 driver "+ "setup files. Then choose Continue." ;----------------------------------------------------------------------- ; ADAPTER PARAMETER DIALOG ; ------------------------ ; This section sets up the adapter parameter dialog. All textstrings ; presented in this dialog are defined here. ; ;----------------------------------------------------------------------- [TKXP16ParameterDlgENG] DlgType = "RadioCombination" DlgTemplate = "OCTK16" Caption = $(FunctionTitle) DlgText = "Please select values for the following fields:" Combo1Label = "&I/O Base Address:" Combo2Label = "&Receive Buffers:" Combo3Label = "&Transmit Buffers:" Combo4Label = "&Max Frame Size:" Combo5Label = "&Bus Number:" Label1 = "&Early Token Release:" Radio1 = "Yes" Radio2 = "No" Label2 = "&Full Transmit Status:" Radio3 = "Yes" Radio4 = "No" Edit1Label = "&Network Address:" Combo1List = $(IOBaseAddrList) Combo1Out = $(IOBaseAddrIndex) Combo2List = $(RcvBufCountList) Combo2Out = $(RcvBufCountIndex) Combo3List = $(XmitBufCountList) Combo3Out = $(XmitBufCountIndex) Combo4List = $(FrameSizeList) Combo4Out = $(FrameSizeIndex) Combo5List = $(BusNoList) Combo5Out = $(BusNoIndex) ComboListItemsIn = {Combo1List, Combo2List, Combo3List, Combo4List, Combo5List} ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out, Combo5Out} EditTextLim = 17 EditTextIn = $(NetworkAddress) RadioOptionGreyed = {} CBOptionsGreyed = {} NotifyFields = {NO, NO, NO, NO, NO} HelpContext = $(ContextContentsID) ;----------------------------------------------------------------------- ; PCMCIA PARAMETER MAIN DIALOG ; ---------------------------- ; This section sets up the adapter parameter dialog. All textstrings ; presented in this dialog are defined here. ; ;----------------------------------------------------------------------- [PCMCIAParameterDlgENG] DlgType = "RadioCombination" DlgTemplate = "PCMCIA" Caption = $(FunctionTitle) DlgText = "Please select values for the following fields:" Free = "&Pcmcia..." Combo1Label = "&I/O Base Address:" Combo2Label = "&Receive Buffers:" Combo3Label = "&Transmit Buffers:" Combo4Label = "&Max Frame Size:" Combo5Label = "&Bus Number:" Label1 = "&Early Token Release:" Radio1 = "Yes" Radio2 = "No" Label2 = "&Full Transmit Status:" Radio3 = "Yes" Radio4 = "No" Edit1Label = "&Network Address:" Combo1List = $(IOBaseAddrList) Combo1Out = $(IOBaseAddrIndex) Combo2List = $(RcvBufCountList) Combo2Out = $(RcvBufCountIndex) Combo3List = $(XmitBufCountList) Combo3Out = $(XmitBufCountIndex) Combo4List = $(FrameSizeList) Combo4Out = $(FrameSizeIndex) Combo5List = $(BusNoList) Combo5Out = $(BusNoIndex) ComboListItemsIn = {Combo1List, Combo2List, Combo3List, Combo4List, Combo5List} ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out, Combo5Out} EditTextLim = 17 EditTextIn = $(NetworkAddress) RadioOptionGreyed = {} CBOptionsGreyed = {} NotifyFields = {NO, NO, NO, NO, NO} HelpContext = $(ContextContentsID) ;----------------------------------------------------------------------- ; PCMCIA COMBO Cards PARAMETER MAIN DIALOG ; ---------------------------------------- ; This section sets up the adapter parameter dialog. All textstrings ; presented in this dialog are defined here. ; ;----------------------------------------------------------------------- [COMBOParameterDlgENG] DlgType = "RadioCombination" DlgTemplate = "PCMCIA" Caption = $(FunctionTitle) DlgText = "Please select values for the following fields:" Free = "&Pcmcia..." Combo1Label = "&I/O Base Address:" Combo2Label = "&Receive Buffers:" Combo3Label = "&Transmit Buffers:" Combo4Label = "&Max Frame Size:" Combo5Label = "&Bus Number:" Label1 = "&Early Token Release:" Radio1 = "Yes" Radio2 = "No" Label2 = "&Full Transmit Status:" Radio3 = "Yes" Radio4 = "No" Edit1Label = "&Network Address:" Combo1List = $(IOBaseAddrList) Combo1Out = $(IOBaseAddrIndex) Combo2List = $(RcvBufCountList) Combo2Out = $(RcvBufCountIndex) Combo3List = $(XmitBufCountList) Combo3Out = $(XmitBufCountIndex) Combo4List = $(FrameSizeList) Combo4Out = $(FrameSizeIndex) Combo5List = $(BusNoList) Combo5Out = $(BusNoIndex) ComboListItemsIn = {Combo1List, Combo2List, Combo3List, Combo4List, Combo5List} ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out, Combo5Out} EditTextLim = 17 EditTextIn = $(NetworkAddress) RadioOptionGreyed = {} CBOptionsGreyed = {} NotifyFields = {NO, NO, NO, NO, NO} HelpContext = $(ContextContentsID) ;----------------------------------------------------------------------- ; MORE PCMCIA PARAMETER DIALOG ; ---------------------------- ; This section sets up the PCMCIA parameter dialog. All textstrings ; presented in this dialog are defined here. ; ;----------------------------------------------------------------------- [PCMCIAMoreDlgENG] DlgType = "RadioCombination" DlgTemplate = "PCMCIAM" Caption = "Pcmcia Setup" DlgText = "Please select values for the following fields:" Free = "&Advanced..." Combo1Label = "I/O &Base Address:" Combo2Label = "&Memory Window:" Combo3Label = "&Interrupt:" Combo4Label = "&Ring Speed:" Combo1List = $(IOBasePCMCIAList) Combo1Out = $(IOBasePCMCIAIndex) Combo2List = $(MemWinList) Combo2Out = $(MemWinIndex) Combo3List = $(InterruptList) Combo3Out = $(InterruptIndex) Combo4List = $(RingSpeedList) Combo4Out = $(RingSpeedIndex) ComboListItemsIn = {Combo1List, Combo2List, Combo3List, Combo4List} ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out} RadioOptionGreyed = {} CBOptionsGreyed = {} NotifyFields = {NO, NO, NO, NO, NO} HelpContext = $(ContextPCMCIASetupID) ;----------------------------------------------------------------------- ; MORE COMBO PARAMETER DIALOG ; --------------------------- ; This section sets up the PCMCIA parameter dialog. All textstrings ; presented in this dialog are defined here. ; ;----------------------------------------------------------------------- [COMBOMoreDlgENG] DlgType = "RadioCombination" DlgTemplate = "COMBOM" Caption = "Pcmcia Setup" DlgText = "Please select values for the following fields:" Free = "&Advanced..." Combo1Label = "I/O &Base Address:" Combo2Label = "&Memory Window:" Combo3Label = "&Interrupt:" Combo4Label = "&Ring Speed:" Combo5Label = "&Com Port:" Combo1List = $(IOBasePCMCIAList) Combo1Out = $(IOBasePCMCIAIndex) Combo2List = $(MemWinList) Combo2Out = $(MemWinIndex) Combo3List = $(InterruptList) Combo3Out = $(InterruptIndex) Combo4List = $(RingSpeedList) Combo4Out = $(RingSpeedIndex) Combo5List = $(ComPortList) Combo5Out = $(ComPortIndex) ComboListItemsIn = {Combo1List, Combo2List, Combo3List, Combo4List, Combo5List} ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out, Combo5Out} RadioOptionGreyed = {} CBOptionsGreyed = {} NotifyFields = {NO, NO, NO, NO, NO} HelpContext = $(ContextPCMCIASetupID) ;----------------------------------------------------------------------- ; PCMCIA ADVANCED SETTINGS DIALOG ; ------------------------------- ; This section sets up the PCMCIA adavanced settings dialog. All ; textstrings presented in this dialog are defined here. ; ;----------------------------------------------------------------------- [PCMCIAAdvancedDlgENG] DlgType = "RadioCombination" DlgTemplate = "PCMCIAADV" Caption = "Pcmcia Advanced Settings" DlgText = "Please select values for the following fields:" Combo1Label = "&Controller I/O Base:" Combo2Label = "&Additional Waitstates:" Radio1Label = "&Datasize:" Radio1Button1 = *($(DatasizeLabels),1) Radio1Button2 = *($(DatasizeLabels),2) Combo1List = $(IOBasePCMCIAControllerList) Combo1Out = $(IOBasePCMCIAControllerIndex) Combo2List = $(WaitstateList) Combo2Out = $(WaitstateIndex) ComboListItemsIn = {Combo1List, Combo2List} ComboListItemsOut = {Combo1Out, Combo2Out} RadioIn = { $(DatasizeIndex) } RadioOptionGreyed = {} CBOptionsGreyed = {} NotifyFields = {NO, NO, NO, NO, NO} HelpContext = $(ContextPCMCIAAdvancedID) ;--------------------------------------------------------------------------- ; 1. Identify ; ; DESCRIPTION: To verify that this INF deals with the same type of options ; as we are choosing currently. ; ; INPUT: None ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL ; $($R1): Option Type (COMPUTER ...) ; $($R2): Diskette description ;--------------------------------------------------------------------------- [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) ;------------------------------------------------------------------------ ; 2. ReturnOptions: ; ; DESCRIPTION: To return the option list supported by this INF and the ; localised text list representing the options. ; ; ; INPUT: $($0): Language used. ( ENG | FRN | ... ) ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE ; STATUS_FAILED ; STATUS_NOTSUPPORTED ; ; $($R1): Option List ; $($R2): Option Text List ;------------------------------------------------------------------------ [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) ;------------------------------------------------------------------------ ; ; InstallOption: ; ; This section is shelled to by main installation processing ; or by NCPASHEL.INF during reconfig, removal, update, etc. ; ; ; FUNCTION: To copy files representing Options ; To configure the installed option ; To update the registry for the installed option ; ; INPUT: $($0): Language to use ; $($1): OptionID to install ; $($2): SourceDirectory ; $($3): AddCopy (YES | NO) ; $($4): DoCopy (YES | NO) ; $($5): DoConfig (YES | NO) ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE | ; STATUS_USERCANCEL | ; STATUS_FAILED ; ;------------------------------------------------------------------------ [InstallOption] StartWait set SrcDir = "" set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) ifstr(i) $(SrcDir) == "" Set SrcDir = "A:\" Endif set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif Debug-Output "STF_CWDDIR is: "$(!STF_CWDDIR) Debug-Output "STF_LANGUAGE is: "$(!STF_LANGUAGE) set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = "OK" endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL SetHelpFile $(HelpfileName) $(ContextMinimumID) $(ContextMaximumID) EndWait Begin = + Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set StartLabel = configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "Cannot configure the driver software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif set IOBaseAddrIndex = *($(IOBaseAddrList), 1) set BusNoIndex = *($(BusNoList), 1) set RcvBufCountIndex = *($(RcvBufCountList), 27) set XmitBufCountIndex = *($(XmitBufCountList), 25) set FrameSizeIndex = *($(FrameSizeList), 3) set NetworkAddress = *($(EditTextOut), 1) set RadioIn = { 1, 3 } set EarlyRelease = "Yes" set FrameStatus = "Yes" set IOBasePCMCIAIndex = *($(IOBasePCMCIAList), $(IOBasePCMCIADefault)) set ComPortIndex = *($(ComPortList), $(ComPortDefault)) set InterruptIndex = *($(InterruptList), $(InterruptDefault)) set MemWinIndex = *($(MemWinList), $(MemWinDefault)) set IOBasePCMCIAControllerIndex = *($(IOBasePCMCIAControllerList), 1) set WaitstateIndex = *($(WaitstateList), 1) set DatasizeIndex = 1 set RingSpeedIndex = *($(RingSpeedList), 1) Shell "" DebugConfiguration "After parameter querying" Shell $(UtilityInf), GetBusTypeNum set BusTypeNum = $($R1) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RcvBufCountValue = *($(RcvBufCountList), ~($(RcvBufCountValues),6)) set XmitBufCountValue = *($(XmitBufCountList), ~($(XmitBufCountValues),8)) set FrameSizeValue = *($(FrameSizeList), ~($(FrameSizeValues),4096)) Set from = $(fatal) Set to = $(fatal) Goto $(StartLabel) ;----------------------------------------------- ; Installation Section ;----------------------------------------------- ; ; Get the current values of all the parameters ; installadapter = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" goto end endif set OldVersionExisted = $(TRUE) endif endif Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) install "Install-Dll" Goto adapteroptions ;----------------------------------------------- ; Configuration Section ;----------------------------------------------- ; ; Get the current values of all the parameters ; configureadapter = + Ifstr(i) $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) Goto fatalregistry endif Set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) ifstr(i) $(ValueName) == "RecBufCount" set RcvBufCountValue = $(ValueData) else-ifstr(i) $(ValueName) == "IoBase" set IOBaseAddrValue = $(ValueData) else-ifstr(i) $(ValueName) == "TransmitBufferCount" set XmitBufCountValue = $(ValueData) else-ifstr(i) $(ValueName) == "TransmitBufferSize" set FrameSizeValue = $(ValueData) else-ifstr(i) $(ValueName) == "BusNumber" set BusNoValue = $(ValueData) else-ifstr(i) $(ValueName) == "EarlyRelease" set EarlyRelease = $(ValueData) else-ifstr(i) $(ValueName) == "FrameStatus" set FrameStatus = $(ValueData) else-Ifstr(i) $(ValueName) == "NetworkAddress" set NetworkAddress = $(ValueData) else-ifstr(i) $(ValueName) == "IoBaseAddress" set IOBasePCMCIAValue = $(ValueData) else-ifstr(i) $(ValueName) == "PCCARDAttributeMemoryAddress" set MemWinValue = $(ValueData) else-ifstr(i) $(ValueName) == "InterruptNumber" set InterruptValue = $(ValueData) else-ifstr(i) $(ValueName) == "ComPortBase" set ComPortValue = $(ValueData) else-ifstr(i) $(ValueName) == "PcmciaCtrlBase" set IOBasePCMCIAControllerValue = $(ValueData) else-ifstr(i) $(ValueName) == "WaitStates" set WaitstateValue = $(ValueData) else-ifstr(i) $(ValueName) == "DataSize" set DatasizeValue = $(ValueData) else-ifstr(i) $(ValueName) == "RingSpeed" set RingSpeedValue = $(ValueData) endif EndForListDo ; ; Combo-lists and radio-buttons use a special list of parameter-names ; when dialogs are executed. The following section converts the actual ; values into the corresponding names (indexes). If a value is undefined, ; the first entry in the index-list is used. ; set RcvBufCountIndex = *($(RcvBufCountList), ~($(RcvBufCountValues),$(RcvBufCountValue))) ifstr(i) $(RcvBufCountIndex) == "" set RcvBufCountIndex = *($(RcvBufCountList), 27) endif set XmitBufCountIndex = *($(XmitBufCountList), ~($(XmitBufCountValues),$(XmitBufCountValue))) ifstr(i) $(XmitBufCountIndex) == "" set XmitBufCountIndex = *($(XmitBufCountList), 25) endif set FrameSizeIndex = *($(FrameSizeList), ~($(FrameSizeValues),$(FrameSizeValue))) ifstr(i) $(FrameSizeIndex) == "" set FrameSizeIndex = *($(FrameSizeList), 3) endif set IOBaseAddrIndex = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrValue))) ifstr(i) $(IOBaseAddrIndex) == "" set IOBaseAddrIndex = *($(IOBaseAddrList), 1) endif set BusNoIndex = *($(BusNoList), ~($(BusNoValues),$(BusNoValue))) ifstr(i) $(BusNoIndex) == "" set BusNoIndex = *($(BusNoList), 1) endif Ifstr(i) $(EarlyRelease) == "Yes" set Rad1 = 1 else set Rad1 = 2 endif Ifstr(i) $(FrameStatus) == "Yes" set Rad2 = 3 else set Rad2 = 4 endif set RadioIn = {$(Rad1), $(Rad2) } set IOBasePCMCIAIndex = *($(IOBasePCMCIAList), ~($(IOBasePCMCIAValues),$(IOBasePCMCIAValue))) ifstr(i) $(IOBasePCMCIAIndex) == "" set IOBasePCMCIAIndex = *($(IOBasePCMCIAList), 1) endif set MemWinIndex = *($(MemWinList), ~($(MemWinValues),$(MemWinValue))) ifstr(i) $(MemWinIndex) == "" set MemWinIndex = *($(MemWinList), 49) endif set InterruptIndex = *($(InterruptList), ~($(InterruptValues),$(InterruptValue))) ifstr(i) $(InterruptIndex) == "" set InterruptIndex = *($(InterruptList), 3) endif set ComPortIndex = *($(ComPortList), ~($(ComPortValues),$(ComPortValue))) ifstr(i) $(ComPortIndex) == "" set ComPortIndex = *($(ComPortList), 6) endif set IOBasePCMCIAControllerIndex = *($(IOBasePCMCIAControllerList), ~($(IOBasePCMCIAControllerValues),$(IOBasePCMCIAControllerValue))) ifstr(i) $(IOBasePCMCIAControllerIndex) == "" set IOBasePCMCIAControllerIndex = *($(IOBasePCMCIAControllerList), 1) endif set WaitstateIndex = *($(WaitstateList), ~($(WaitstateValues),$(WaitstateValue))) ifstr(i) $(WaitstateIndex) == "" set WaitstateIndex = *($(WaitstateList), 2) endif set DatasizeIndex = *($(DatasizeList), ~($(DatasizeValues),$(DatasizeValue))) ifstr(i) $(DatasizeIndex) == "" set DatasizeIndex = *($(DatasizeList), 1) endif ; ; This section runs the dialogs. From the main dialog (adapter parameter ; setup) it is possible to enter the PCMCIA dialog if requested. When ; exiting the PCMCIA dialog the user is returned to the main dialog. ; adapteroptions = + Set from = adapteroptions set OldNetAddress = $(NetworkAddress) ; ; Load DLL containing dialogs and verification routines ; LoadLibrary "Intel Driver Disk" $(DialogDllName) DialogHandle adapteroptions1 = + ; ; Read main dialog setup and show dialog ; read-syms $(Option)ParameterDlg$(!STF_LANGUAGE) ui start "InputDlg" $(DialogHandle) ui pop 1 ; ; Save new settings because this dialog might be called again. ; If CANCEL was pressed these values will not be used ; set IOBaseAddrIndex = $(Combo1Out) set RcvBufCountIndex = $(Combo2Out) set XmitBufCountIndex = $(Combo3Out) set FrameSizeIndex = $(Combo4Out) set BusNoIndex = $(Combo5Out) IfContains "1" IN $(RadioOut) set EarlyRelease = "Yes" else-IfContains "2" IN $(RadioOut) set EarlyRelease = "No" endif IfContains "3" IN $(RadioOut) set FrameStatus = "Yes" else-IfContains "4" IN $(RadioOut) set FrameStatus = "No" endif set NetworkAddress = *($(EditTextOut),1) ifstr(i) $(DLGEVENT) == "CONTINUE" ; ; parameters have already been stored at this stage ; goto nextstep else-ifstr(i) $(DLGEVENT) == "EXIT" set CommonStatus = STATUS_USERCANCEL Debug-Output "Action: exit. Bye." FreeLibrary $(DialogHandle) goto end else-ifstr(i) $(DLGEVENT) == "FREEBUTTON1" adapteroptions2 = + ; ; Read PCMCIA dialog setup and show dialog ; ifstr(i) $(Option) == "PCMCIA" read-syms PCMCIAMoreDlg$(!STF_LANGUAGE) else read-syms COMBOMoreDlg$(!STF_LANGUAGE) Endif ui start "InputDlg" $(DialogHandle) ui pop 1 ; ; Save new settings because this dialog might be called again. ; If CANCEL was pressed these values will not be used ; set IOBasePCMCIAIndex = $(Combo1Out) set MemWinIndex = $(Combo2Out) set InterruptIndex = $(Combo3Out) set RingSpeedIndex = $(Combo4Out) set ComPortIndex = $(Combo5Out) ifstr(i) $(DLGEVENT) == "CONTINUE" ; ; parameters have already been stored at this stage ; goto adapteroptions1 else-ifstr(i) $(DLGEVENT) == "FREEBUTTON1" ; ; Read PCMCIA Advanced dialog setup and show dialog ; read-syms PCMCIAAdvancedDlg$(!STF_LANGUAGE) ui start "InputDlg" $(DialogHandle) ui pop 1 ; ; Save new settings because this dialog might be called again. ; If CANCEL was pressed these values will not be used ; set IOBasePCMCIAControllerIndex = $(Combo1Out) set WaitstateIndex = $(Combo2Out) set DatasizeIndex = *($(RadioOut),1) goto adapteroptions2 else Debug-Output "Action: unknown: "$(DLGEVENT) FreeLibrary $(DialogHandle) goto end endif else Debug-Output "Action: unknown: "$(DLGEVENT) FreeLibrary $(DialogHandle) goto end endif nextstep =+ ifstr $(NetworkAddress) != "" ; ; If network address has been entered then verify that it is a ; valid address (not a multicast or broadcast address) ; set FLibraryErrCtl = 1 LibraryProcedure DlgResult $(DialogHandle) VerifyAddress $(NetworkAddress) set FLibraryErrCtl = 0 ifstr $(DlgResult) != "STATUS_SUCCESS" FreeLibrary $(DialogHandle) set Error = $(DlgResult) goto nonfatal endif endif FreeLibrary $(DialogHandle) ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait Ifint $(OldVersionExisted) != $(FALSE) Goto installhardware Endif ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Ifstr(i) $(SrcDir) == "" read-syms AskSourceDlgText Shell $(subroutineinf) DoAskSourceEx $(SrcDir) $(DlgText) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL), "" Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "OEMNADUB.INF: Registry error: add software components" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) goto fatalregistry endif set SoftProductKey = $($R1) Set SoftNetRuleKey = $($R2) Set SoftServiceKey = $($R3) Set SoftParameterKey = $($R4) Set SoftLinkageKey = $($R5) set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." goto fatalregistry endif ; ; Insert hardware component in registry ; installhardware =+ Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyProduct = $($R1) set KeyAdapterRules = $($R2) set KeyParameters = $($R3) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $(KeyProduct) Set KeyProduct = "" set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif CloseRegKey $(KeyAdapterRules) set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyParameters) goto fatalregistry endif ; ; Write Adapter Parameters to registry ; writeparameters = + Shell $(UtilityInf), GetBusTypeNum set BusTypeNum = $($R1) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif Ifstr(i) $(KeyParameters) == $(KeyNull) Debug-Output "*** KeyParameters is NULL at writeparameters" Endif ; ; Convert selections from combo-lists and radio-buttons into actual ; parameter values ; set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrIndex))) set BusNoValue = *($(BusNoValues), ~($(BusNoList),$(BusNoIndex))) set RcvBufCountValue = *($(RcvBufCountValues), ~($(RcvBufCountList),$(RcvBufCountIndex))) set XmitBufCountValue = *($(XmitBufCountValues), ~($(XmitBufCountList),$(XmitBufCountIndex))) set FrameSizeValue = *($(FrameSizeValues), ~($(FrameSizeList),$(FrameSizeIndex))) set IOBasePCMCIAValue = *($(IOBasePCMCIAValues), ~($(IOBasePCMCIAList),$(IOBasePCMCIAIndex))) set MemWinValue = *($(MemWinValues), ~($(MemWinList),$(MemWinIndex))) set InterruptValue = *($(InterruptValues), ~($(InterruptList),$(InterruptIndex))) set RingSpeedValue = *($(RingSpeedValues), ~($(RingSpeedList),$(RingSpeedIndex))) set ComPortValue = *($(ComPortValues), ~($(ComPortList),$(ComPortIndex))) set IOBasePCMCIAControllerValue = *($(IOBasePCMCIAControllerValues), ~($(IOBasePCMCIAControllerList),$(IOBasePCMCIAControllerIndex))) set WaitstateValue = *($(WaitstateValues), ~($(WaitstateList),$(WaitstateIndex))) set DatasizeValue = *($(DatasizeValues), ~($(DatasizeList),$(DatasizeIndex))) ifstr(i) $(Option) == "COMBO" ; ; If we're installing a ComboCard, update settings for Serial\parameters\serialtkxp16 as well ; SERIALCOMM will be created automatically by serial.sys ; ifint $(ComPortValue) != 0 OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters\SerialTKXP16"$(AdapterNumber) $(MAXIMUM_ALLOWED) SerialHandle Ifstr $(SerialHandle) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) SerialKey CreateRegKey $(SerialKey) {"SerialTKXP16"$(AdapterNumber),0,GenericClass} "" $(MAXIMUM_ALLOWED) "" SerialHandle CloseRegKey $(SerialKey) endif ifint $(ComPortValue) != 24 set NewValueList = {{DosDevices, $(NoTitle),$(!REG_VT_SZ), $(ComPortIndex)},+ {ForceFifoEnable, $(NoTitle),$(!REG_VT_DWORD), 0},+ {ForceShare, $(NoTitle),$(!REG_VT_DWORD), 1},+ {Interrupt, $(NoTitle),$(!REG_VT_DWORD), $(InterruptValue)},+ {PortAddress, $(NoTitle),$(!REG_VT_DWORD), $(ComPortValue)}} Else set-add ComportBaseAddress = $(ComPortValue), $(IOBasePCMCIAValue) set NewValueList = {{DosDevices, $(NoTitle),$(!REG_VT_SZ), $(ComPortIndex)},+ {ForceFifoEnable, $(NoTitle),$(!REG_VT_DWORD), 0},+ {ForceShare, $(NoTitle),$(!REG_VT_DWORD), 1},+ {Interrupt, $(NoTitle),$(!REG_VT_DWORD), $(InterruptValue)},+ {PortAddress, $(NoTitle),$(!REG_VT_DWORD), $(ComportBaseAddress)}} Endif Shell $(UtilityInf), AddValueList, $(SerialHandle), $(NewValueList) CloseRegKey $(SerialHandle) ; ; Update settings comm port in SOFTWARE\Microsoft\Windows NT\CurrentVersion\Ports section ; OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\Ports" $(MAXIMUM_ALLOWED) SerialHandle Ifstr $(SerialHandle) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(MAXIMUM_ALLOWED) SerialKey CreateRegKey $(SerialKey) {"Ports",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" SerialHandle CloseRegKey $(SerialKey) endif SetRegValue $(SerialHandle) {$(ComPortIndex)":",$(NoTitle),$(!REG_VT_SZ), "9600,n,8,1"} CloseRegKey $(SerialHandle) Else ; ; Be nice and delete the COM stuff if user really wants so ; SERIALCOMM will be deleted automatically ; OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) SerialHandle DeleteRegTree $(SerialHandle) "SerialTKXP16"$(AdapterNumber) CloseRegKey $(SerialHandle) Endif Endif ; ; Set up parameter list for AddValueList routine ; Set NewValueList = {{IoBase,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),2},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNoValue)},+ {RecBufCount,$(NoTitle),$(!REG_VT_DWORD),$(RcvBufCountValue)},+ {TransmitBufferCount,$(NoTitle),$(!REG_VT_DWORD),$(XmitBufCountValue)},+ {TransmitBufferSize,$(NoTitle),$(!REG_VT_DWORD),$(FrameSizeValue)},+ {EarlyRelease,$(NoTitle),$(!REG_VT_SZ),$(EarlyRelease)},+ {FrameStatus,$(NoTitle),$(!REG_VT_SZ),$(FrameStatus)},+ {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBasePCMCIAValue)},+ {IoLength,$(NoTitle),$(!REG_VT_DWORD),31},+ {PCCARDAttributeMemoryAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemWinValue)},+ {PCCARDAttributeMemorySize, $(NoTitle),$(!REG_VT_DWORD),4096},+ {PCCARDAttributeMemoryOffset, $(NoTitle),$(!REG_VT_DWORD),0},+ {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(InterruptValue)},+ {RingSpeed,$(NoTitle),$(!REG_VT_DWORD),$(RingSpeedValue)},+ {ComPortBase,$(NoTitle),$(!REG_VT_DWORD),$(ComPortValue)},+ {PcmciaCtrlBase,$(NoTitle),$(!REG_VT_DWORD),$(IOBasePCMCIAControllerValue)},+ {Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+ {WaitStates,$(NoTitle),$(!REG_VT_DWORD),$(WaitstateValue)},+ {DataSize,$(NoTitle),$(!REG_VT_DWORD),$(DatasizeValue)}} ifstr $(NetworkAddress) != "" set NewValueList = >($(NewValueList),{NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)}) endif ; ; Now update registry ; Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ; ; If the network address has been deleted then also delete it from ; the registry. ; ifstr $(OldNetAddress) != "" ifstr $(NetworkAddress) == "" DeleteRegValue $(KeyParameters) NetworkAddress endif endif ; ; If we're not installing a PCMCIA Card, remove PCMCIA specific settings ; ifstr(i) $(Option) == "TKXP16" DeleteRegValue $(KeyParameters) IoBaseAddress DeleteRegValue $(KeyParameters) IoLength DeleteRegValue $(KeyParameters) PCCARDAttributeMemoryAddress DeleteRegValue $(KeyParameters) PCCARDAttributeMemorySize DeleteRegValue $(KeyParameters) PCCARDAttributeMemoryOffset DeleteRegValue $(KeyParameters) InterruptNumber DeleteRegValue $(KeyParameters) RingSpeed DeleteRegValue $(KeyParameters) ComPortBase DeleteRegValue $(KeyParameters) PcmciaCtrlBase DeleteRegValue $(KeyParameters) Pcmcia DeleteRegValue $(KeyParameters) WaitStates DeleteRegValue $(KeyParameters) DataSize Endif ifstr(i) $(Option) == "PCMCIA" DeleteRegValue $(KeyParameters) ComPortBase Endif CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif ; ; Add some keywords to the PCMCIA database in the registry ; ifstr(i) $(Option) == "PCMCIA" set PCMCIADatabaseKeyName = $(!NTN_ServiceBase)"\Pcmcia\DataBase" OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseKeyName) $(MAXIMUM_ALLOWED) PCMCIADatabaseKey ifstr $(PCMCIADatabaseKey) != $(NULL) OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIADatabaseKeyName) $(MAXIMUM_ALLOWED) PCMCIADatabaseOlicomKey ifstr $(PCMCIADatabaseOlicomKey) != $(NULL) ; open succeeded, so delete it CloseRegKey $(PCMCIADatabaseOlicomKey) DeleteRegTree $(PCMCIADatabaseKey) "Olicom" endif CreateRegKey $(PCMCIADatabaseKey) {"Olicom", 0, 0} "" $(MAXIMUM_ALLOWED) "" PCMCIADatabaseOlicomKey CreateRegKey $(PCMCIADatabaseOlicomKey) {"TR16/4", 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseOlicom3220Key SetRegValue $(PCMCIADatabaseOlicom3220Key) {Driver, 0, $(!REG_VT_SZ),"tkxp16"} CloseRegKey $(PCMCIADatabaseOlicom3220Key) CreateRegKey $(PCMCIADatabaseOlicomKey) {"TR 16/4 II", 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseOlicom3221Key SetRegValue $(PCMCIADatabaseOlicom3221Key) {Driver, 0, $(!REG_VT_SZ),"tkxp16"} CloseRegKey $(PCMCIADatabaseOlicom3221Key) ; ; When NT 3.51 sees our Combo cards, it enables a COM port only. ; We therefore rely on our own enabling mechanism in these cases. ; ; CreateRegKey $(PCMCIADatabaseOlicomKey) {"GoCard Token-Ring 16/4+Modem 14400", 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseOlicom3230Key ; SetRegValue $(PCMCIADatabaseOlicom3230Key) {Driver, 0, $(!REG_VT_SZ),"tkxp16"} ; CloseRegKey $(PCMCIADatabaseOlicom3230Key) ; CreateRegKey $(PCMCIADatabaseOlicomKey) {"GoCard Token-Ring 16/4+Modem 28800", 0, 0} "" $(MAXIMUM_ALLOWED) 0 PCMCIADatabaseOlicom3231Key ; SetRegValue $(PCMCIADatabaseOlicom3231Key) {Driver, 0, $(!REG_VT_SZ),"tkxp16"} ; CloseRegKey $(PCMCIADatabaseOlicom3231Key) CloseRegKey $(PCMCIADatabaseOlicomKey) Endif Endif EndWait goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal ;----------------------------------------------- ; Remove Adapter Section ;----------------------------------------------- ; ; Remove all adapter information from the registry ; removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif ; ; Remove associated Com port ; ifstr(i) $(Option) == "COMBO" OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Serial\Parameters" $(MAXIMUM_ALLOWED) SerialHandle DeleteRegTree $(SerialHandle) "Serialtkxp16"$(AdapterNumber) CloseRegKey $(SerialHandle) endif endif goto end UpgradeSoftware = + ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) GetRegValue $(KeyProduct),"MajorVersion", VersionInfo set Version = *($(VersionInfo), 4) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) ifstr(i) $(!UG_Filename) != "" install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} ifint $(Version) != $(ProductVersion) endif CloseRegKey $(KeyProduct) else goto fatalregistry endif else OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) + $(MAXIMUM_ALLOWED) NetworkCardKey Ifstr(i) $(NetworkCardKey) != $(KeyNull) GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo set ServiceName = *($(ServiceNameInfo), 4) OpenRegKey $(NetworkCardKey) "" "NetRules" + $(MAXIMUM_ALLOWED) NetRuleKey Ifstr(i) $(NetRuleKey) != $(KeyNull) else CloseRegKey $(NetworkCardKey) goto fatalregistry endif CloseRegKey $(NetRules) CloseRegKey $(NetworkCardKey) else goto fatalregistry endif OpenRegKey $(!REG_H_LOCAL) "" + $(!NTN_ServiceBase)"\"$(ServiceName) + $(MAXIMUM_ALLOWED) ServiceKey Ifstr(i) $(ServiceKey) != $(KeyNull) CloseRegKey $(ServiceKey) else goto fatalregistry endif endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = "Error: "$(FunctionTitle) set STF_MB_TEXT = "Shell Code Error" set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Stat $(SrcDir) $(!STF_WINDOWSSYSPATH) endif Debug-Output "OEMSETUP.INF: [Install-Option] DoCopy = "$(DoCopy) ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Stat $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-Dll] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif exit [Source Media Descriptions] 1 = "Intel Driver Disk" [Signature] FileType = MICROSOFT_DRVLIB_FILE [GetSignature] read-syms Signature return $(FileType) [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 1, oemsetnt.inf, SIZE=999, RENAME=$(!UG_Filename) [Files-TKXP16] 1, octk16.sys, SIZE=999 [Files-PCMCIA] 1, octk16.sys, SIZE=999 [Files-COMBO] 1, octk16.sys, SIZE=999 1, serial.sys, SIZE=999 [Files-Dll] 1, octk16.dll, SIZE=999 1, octk16.hlp, SIZE=999 [Files-Stat] 1, octkstat.exe, SIZE=999 [Files-dummy]