4   Post-Upgrade PAGEFILE, SWAPFILE, DUMPFILE errors?   The Question is:    N I installed UCX 5.4 and ECO1 on my VMS 7.3-1 system and got it to work.  Then,M  having nothing better to do, decided to upgrade VMS to 7.3-2.  Upgrade seems M  to go smoothly to completion but, when booting generates errors in accessing   page, swap, errorlog a F nd sysdump files as well as mounting system disk by getting error codeM  00000144.  The only thing different was that I had converted the system disk J  to ods-5 during the 7.3-1 install, which worked fine under 7.3-1.    What"  would be the ebst remedy for this  ?    Thanks,  Alex  The Answer is :   C   Please contact the support center directly, as additional context :   around the bootstrap error messages will be of interest.   A   The OpenVMS Wizard will assume the documented upgrade procedure A   was used, and the system was bootstrapped from the distribution ?   medium and the system disk was upgraded from the menu system.    ?   The upgrade particularly assumes there are page and swapfiles <   on the system disk during the upgrade, though these can be<   moved off the system disk -- the upgrade documentation has+   some details on the upgrade requirements.       As for the specific error:    $ exit %x144' %SYSTEM-F-IVDEVNAM, invalid device name       >   The upgrade is expected to perform an AUTOGEN as part of the8   processing, and this is generally where such files are   created or sized.    ?   If you wish to manually attempt to create these files, please >   see the SYS$UPDATE:SWAPFILES.COM command procedure, or other7   similar approach.  Alternatively, check for PAGEFILE, <   SWAPFILE, and DUMPFILE settings in MODPARAMS.DAT (settings>   of which can force a particular file size or no file changes   at all) and (re)run AUTOGEN.   /  Answer written or last revised on  8-APR-2004  