 Diskette:   PIRA 50 Utility Diskette
 Part #:     DK0024 ( 3.5" diskette )
 Release:    1.05
 Date:       March 5, 1992
 Volume:     DSK_DRV_PTI


 NOTE:  This release of software has changed the filenames of the
        NetWare 2.2 disk driver.  Use the names MCIDE.OBJ and MCIDE.DSK
        in place of PIRANET.OBJ and PIRANET.DSK where specified in the
        manual.  If you are upgrading an old driver, be sure to remove
        the PIRANET.OBJ and PIRANET.DSK files from the AUXGEN and
        DSK_DRV_PTI subdirectories if they exist.



                             N E T W A R E   2 . 2

              I N S T A L L A T I O N   I N S T R U C T I O N S

                            Procom Technology, Inc.
			       MCIDE Disk Driver
                          For Novell NetWare 2.2 (Tm)
                                 Release 1.04


   1.  Run Novell's INSTALL utility.  Select "Advanced Installation".

   2.  Choose the operating system options and LAN driver.  To install
       the disk driver, choose the channel you wish to install on (usually
       this will be channel 0 if there are no other disk drivers being
       installed).  Select "Driver: (Press <Enter> to see list".  

   3.  When the list is displayed press the INSERT key.  Insert the
       Procom Technology, Inc. PIRA 50 Utility Diskette in any drive and 
       press the ENTER key.  Use the arrow keys to select "Procom 
       Technology, Inc. MCIDE Disk Controller" and press the ENTER key.

   4.  Select "Configuration Option:".  You need only to select "MCIDE
       Automatic Configuration".  

   5.  During the linking process, you may be prompted several times to
       insert other diskettes.  When INSTALL asks to insert DSK_DRV_PTI,
       then insert the Procom Technology, Inc. PIRA 50 Utility Diskette
       again.

   6.  When installation is finished, remove the floppy diskette from
       drive A and reboot the system.


