 Diskette:   PCD650S Installation Diskette
 Part #:     DK0066 ( 3.5" diskette  )
             DK0067 ( 5.25" diskette )
 Release:    2.02
 Date:       June 17, 1992
 Volume:     PCD650S

 Diskette Contents:
 ------------------

 INSTALL.EXE     - Driver installation utility
 PCD650S.SYS     - CD-ROM Device Driver
 PCD650SM.SYS    - CD-ROM MultiMedia Device Driver (MPC compatible)
 MSCDEX.EXE      - Microsoft(R) CD-ROM extensions driver
 PLAYCD.EXE      - Audio CD player utility
 README          - This file
 README.EXE      - README file viewer utility



                          DEVICE DRIVER INSTALLATION
                          ==========================

 NOTE: This release of MSCDEX.EXE does not require SETVER.EXE
       in order to run under DOS 5.00 as indicated in the manual.

 Before beginning the software installation, check the hardware settings
 of the CD-ROM controller card with the hardware installation manual.
 Boot from the hard disk you plan to install the software onto.
 Insert the PCD650S Installation Diskette into drive A and type,

     A:INSTALL C:

 If your system has a 386 or 486 processor, you will have the option
 of installing the non-MPC device driver or the MPC device driver.
 If you have at least 2MB of RAM and an extended memory manager, choose
 the MPC device driver, otherwise choose the non-MPC device driver.

 When installation is complete, remove the diskette from drive A
 and reboot the computer by pressing <<Ctrl-Alt-Del>>.



                               ABOUT PLAYCD.EXE
                          ==========================

  PLAYCD.EXE Utility
     This utility lets you play audio CDs with your CD-ROM drive.  You
     will need a headphone set or a pair of external speakers connected
     to the CD-ROM drive to hear the sound being played.

     If you installed the non-MPC device driver, the installation program 
     will copy PLAYCD.EXE to the \PCD650S subdirectory on your hard disk.
     To run the program, type the following commands:

         CD \PCD650S
         PLAYCD

     If you installed the MPC compatible device driver, the installation
     program will copy PLAYCD.EXE to the \PCD650SM subdirectory on your
     hard disk.
     To run the program, type the following commands:

         CD \PCD650SM
         PLAYCD


     The PLAYCD.EXE utility menu has a numbered box at the top 
     of the screen that shows the track numbers on your audio CD.  Use the 
     up-down-left-right arrow keys on your keyboard to highlight the 
     desired button.

  Press F1 if you need help or additional explanation of the selected 
     function.  Explanations and instructions appear on your screen and 
     are described briefly in the following paragraphs:

  Play Button
     Use this button to start playing the audio track specifed. 
     If you have already programmed in your own track numbers, play will 
     start from the first programmed track; otherwise, play will start with 
     the first track.
  
  Pause Button
     Use this button to pause the CD in its current play position.  Press 
     the button again to continue to play.

  Repeat Button
     This button is used to repeat a program.  Play will repeat once the 
     CD has reached the end of its assigned program.

  Stop Button
     Press this button to stop playback.

  Eject Button
     Press this button to eject the disc.  This button should not be used
     with the PICD650S or PXCD650S CD-ROM drives.

  Program Button
     This button is used to select tracks in any order, so that you may 
     listen to your favorite selections.

  Power Button
     Press this button when you want to exit the program.  If music is 
     already playing, then it will play in the background.  It will not 
     play programmed selections in the background.

  Time Button
     This button allows you to toggle between 3 different times:
     1.  Elapsed Time
     2.  Track Time
     3.  Time Remaining

     These times are calculated from when the play button was first pressed.

  **************************************************************************

          Trouble Shooting

          If a problem occurs during installation, or normal
          operation of the CD-ROM unit, these steps should be taken
          to verify that the unit is operating correctly.

          1.  Format a blank diskette in your A: drive, making sure
              that you include the "/S" parameter to create a
              bootable system diskette.  Refer to your DOS manual for
              instructions on formatting floppy diskettes.

          2.  Create a CONFIG.SYS file on the newly formatted
              diskette to load the PCD650S.SYS driver ONLY!
              No parameters following the device driver will be
              necessary for testing.  This can be easily
              accomplished by typing from the A: prompt:

                  COPY CON CONFIG.SYS  (Enter)
                  DEVICE=PCD650S.SYS   (Enter)
                  ^Z    (This is produced by typing CTRL-Z, Enter)


          3.  Copy MSCDEX.EXE and the PCD650S.SYS device driver from the
              driver diskette that was included with the CD-ROM drive to
              the newly formatted diskette.  
              If you only have one floppy drive, you can copy files between
              diskettes like this:

                      COPY A:MSCDEX.EXE B:  (Enter)

              You will be prompted when to remove the source diskette and 
              insert the destination diskette.  When this is done, copy
              the other file with the command:

                      COPY A:PCD650S.SYS B:  (Enter)
              

          4.  Turn off the computer system and reset the CD-ROM
              controller board to it's factory default jumper
              settings, as shown in the manual.  If you have another
              controller in the computer that is using the default
              I/O address, remove that board temporarily for testing.

          5.  Reboot the system with the new, bootable, diskette in
              drive A:.  You should see the device driver load and
              identify the CD-ROM.

          6.  Enter date and time if necessary and continue to the
              A: prompt and type:

                        MSCDEX /D:MSCD001

              The Microsoft CD-ROM Extensions should load and define
              a drive letter to the CD-ROM, note the drive letter.
              You should be able obtain a directory of a CD placed
              in the CD-ROM unit by typing in:

                        DIR d:   (where d: is the drive letter of
                                  CD-ROM drive.)

          At this point the CD-ROM is ready to continue testing with
          a CD based piece of software.  Choose an appropriate
          software package, ideally something that runs entirely
          from the CD-ROM drive by following the instructions
          included with the software.

          If any errors are encountered while using the unit in this
          environment, please contact your dealer for further
          assistance.

  **************************************************************************

     Microsoft is a registered trademark of Microsoft Corporation.
