
   Ŀ
                                                                     
              P R O C O M   T E C H N O L O G Y ,   I N C .          
                                                                     
                    I S H A  P U L S  S O F T W A R E                
                                                                     
   ;

 Diskette : ISHA PULS Drivers/Utilities
 Part #   : DK0079 ( 3.5" diskette )
 Release  : 1.06
 Date     : June 05, 1995
 Volume   : ISHA_PULS


  This file contains updated information NOT contained in the users manual.
  Read this entire file before installing the ISHA software.


                          DOS Driver Installation
        
               

    The INSTALL.EXE program will modify your CONFIG.SYS file to include
    the drivers needed for the devices you have installed.
    This program also copies the DOS utility programs to your fixed drive.

    To begin the installation procedure:

       1. Boot the system from the hard disk.

       2. Insert the ISHA PULS Drivers/Utilities Disk into drive A, 
          then type:

            A:INSTALL   <Press Enter>

       3. Follow the installation instructions as they appear on the
          screen.  Choose the devices you are installing from the
          menu of SCSI devices.  You can choose more than one if you
          are installing multiple types of devices.

       4. Following the installation, you must reboot the system to
          to load the device drivers.


  

                        Using DOS 6.0 with DOUBLESPACE

    If you compress a removable disk volume, you must DISMOUNT the volume
    before ejecting the cartridge.  When inserting a new cartridge, you
    will need to MOUNT the volume.


  

                           Tape Driver Installation
        
               

    The tape drivers supplied on this diskette are compatible with
    Sytos Plus Version 1.3x and are stored in uncompressed form to
    allow installation with the Sytos Plus Installation program.

    Before installing Sytos Plus, run the installation program on this
    diskette.  After the installation, you must reboot the computer
    to load the ISHA PULS driver.

    While you are installing Sytos Plus, you will need this diskette
    again to retrieve the tape drivers.  Refer to the installation
    instructions in the Sytos Plus User's Guide.

  

                              End of README File
