Configuration
  Memory Address  .  .  .  .  .  .  .  .  .  .  .  .  .
  Interrupt Level .  .  .  .  .  .  .  .  .  .  .  .  .
  Mode Selection  .  .  .  .  .  .  .  .  .  .  .  .  .
  Adapter Id   .  .  .  .  .  .  .  .  .  .  .  .  .  .
Dual Port  (PS2 side).  .  .  .  .  .  .  .  .  .  .  .
Power On/Reset .  .  .  .  .  .  .  .  .  .  .  .  .  .
Interrupts (KT2 to PS2) .  .  .  .  .  .  .  .  .  .  .
Start/Stop 1784-KT2 Processor (Z80 CPU).  .  .  .  .  .
Dual Port  (KT2 side).  .  .  .  .  .  .  .  .  .  .  .
Interrupts (PS2 to KT2) .  .  .  .  .  .  .  .  .  .  .
Memory   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
Timer Operation.  .  .  .  .  .  .  .  .  .  .  .  .  .
Serial Port Operation.  .  .  .  .  .  .  .  .  .  .  .
DH+   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
PLC-2 .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
Diagnostic Loop   .  .  .  .  .  .  .  .  .  .  .  .  .
Diagnostic Read   .  .  .  .  .  .  .  .  .  .  .  .  .
Diagnostic Status .  .  .  .  .  .  .  .  .  .  .  .  .
Configuration                            Start/Stop KT2 CPU
  Memory Address                         Dual Port(KT2 side)
  Interrupt Level                        Interrupt(PS2->KT2)
  Mode Select                            Memory   (62K )
  Adapter ID                             Timer Operation
Dual Port (PS2 side)                     Serial Port
Power-On/Reset                           DH+   Offline
Interrupt (KT2->PS2)                     PLC-2 Offline
Diagnose
Configure
Exit
Host...
Card...
Offline Communications...
All Components...
Single Pass
Repeat
Change Parameters
Quit
Allen-Bradley 1784-KT2 Diagnostic Program    Version 1.0
HOST DIAGNOSTICS                  Status:          Pass:       Of:
CARD DIAGNOSTICS                  Status:          Pass:       Of:
OFFLINE COMMUNICATION DIAGNOSTICS Status:          Pass:       Of:
ONLINE COMMUNICATION DIAGNOSTICS  Status:          Pass:       Of:
ALL DIAGNOSTICS                   Status:          Pass:       Of:
CONFIGURE 1784-KT2 PARAMETERS
SELECT PORT
SELECT DIRECT CONNECT PORT
DIAGNOSTIC                                               FAILURES  RESULT
----------                                               --------  ------
DIAGNOSTIC         FAILURES  RESULT      DIAGNOSTIC      FAILURES  RESULT
----------         --------  ------      ----------      --------  ------
F1-Help
ALT F1-Expand/Contract Help Windows
F2-Choice List
F3-Select Module
F4-Select Port
F4-Select Direct Connect
ENTER-Select Option
ENTER-Select Item
F5-Continue
ESC-Exit
ESC-Abort
ESC-Exit Select
ESC-Stop Test
PGUP-Page Up
PGDN-Page Down
HOME-Top of list
HOME-Top of Help
END-End of list
END-End of Help
ESC-Exit Help
Install loopback cable with PLC2 capability.  Are you ready to begin?
Install loopback cable with PLC3 capability.  Are you ready to begin?
Connect 1784-KT2 to the DH+ Network.  Are you ready to being?
Connect 1784-KT2 to the DH485 Network.  Are you ready to begin?
Select port to test:
Select Direct Connect port to test:
Select 1784-KT2 module to test.
IRQX
PLC
PLC-2
PLC-3
DH+
RUNNING
COMPLETE
PASS
FAIL
PASS:
OF:
NUM FAILS:
PASS/FAIL:
ERROR CODE:
FINAL RESULTS
Loading Allen Bradley 1784-KT2 Diagnostic Program
                        Verifying DH+ connection
                        Verifying DH-485 connection
WARNING: Ensure the changes you make do not conflict with other modules.
WARNING: Configuration conflicts will cause damage!  Do you wish to save?
Press 'Y' for yes and 'N' for no:
Press 'Y' to save, 'N' to cancel or any other key to change:
Press 'Y' for yes and any other key for no:
Press any key to acknowledge:
Press any key to return to Main Menu:
Press any key to continue:
1784-KT2 installed in slot(s):
No module was chosen.  Do you still wish to exit?
Are you sure you wish to exit this program?
How many times? (0 for continuous repeat):
Enter count between 1 - 32766, or 0 for continuous repeat:
MAXIMUM OUTPUT FILE SIZE REACHED.
WARNING: Serious damage will occur if 1784-KT2 is connected to a network.
Do you wish to continue?
Error: No error found.
Error Code:  1    Startup Failure.
Error Code:  2    RAM0 Failure.
Error Code:  3    Protocol File KT2DH+.BIN Open or Missing.
Error Code:  4    KT2 Dual Port Failure.
Error Code:  5    Invalid Memory Address Selected.
Error Code:  6    No card configured for given address.
Error Code:  7    Download Failure.
Error Code:  8    CTC Timer Mode Failure.
Error Code:  9    Diagnostic File KT2ST0.BIN Open or Missing.
Error Code:  10   Diagnostic File KT2ST1.BIN Open or Missing.
Error Code:  11   Diagnostic File KT2ST2.BIN Open or Missing.
Error Code:  12
Error Code:  13   Diagnostic File KT2INT.BIN Open or Missing.
Error Code:  14   Diagnostic File KT2PLC2.BIN Open or Missing.
Error Code:  15   Diagnostic File KT2PLC3.BIN Open or Missing.
Error Code:  18   Diagnostic File KT2DHP.BIN Open or Missing.
Error Code:  19   Diagnostic File KT2_485.BIN Open or Missing.
Error Code:  16   CTC Counter Mode Failure.
Error Code:  32   SIO Channel A Failure - No Interrupts.
Error Code:  64   SIO Channel A Failure - Loopback.
Error Code:  15   Host Dual Port Failure.
Error Code:  17   Board Held at Reset.
Error Code:  128  RAM1 Failure.
Error Code:  130  RAM0, RAM1 Failure.
Error Code:  132  RAM1, Dual Port Failure.
Error Code:  24   CTC Timer/Counter Mode Failure.
Error Code:  48   Diagnostic 0 Timeout - Memory and 1784-KT2 dual port.
Error Code:  49   Diagnostic 1 Timeout - Timer.
Error Code:  50   Diagnostic 2 Timeout - Serial Port.
Error Code:  51   Diagnostic 3 Timeout.
Error Code:  52   Card interrupt diagnostic timeout.
Error Code:  53   PLC2 Offline diagnostic timeout.
Error Code:  54   PLC3 Offline diagnostic timeout.
Error Code:  55   DH+ Offline diagnostic timeout.
Error Code:  56   DH-485 Offline diagnostic timeout.
Error Code:  62   KT2 to PS/2 interrupt failure.
Error Code:  63   PS/2 to KT2 interrupt failure.
Error Code:  66   Status register indicates 1784-KT2 Start failure.
Error Code:  68   Status register indicates 1784-KT2 Stop failure.
Error Code:  70   Interrupt successful but status register is inaccurate.
Error Code:  80   Offline parity error.
Error Code:  81   Offline framing error.
Error Code:  82   Offline overrun error.
Error Code:  83   Offline underrun error.
Error Code:  84   Offline baud rate error.
Error Code:  85   Offline RTS/CTS error.
Error Code:  86   Offline data error.
Error: Incorrect Version of DOS.  Must be 3.3 or greater.
Error: Needed files not found or couldn't be opened. Exiting program.
Error: There are no 1784-KT2 modules installed. Exiting program.
Error: Failure to install.
Error: Can not read the input file.
Error: Illegal address given.  Retype or use choice list.
Error: Illegal interrupt given.  Retype or use choice list.
Error: Illegal mode given.  Retype or use choice list.
Error: No memory available to allocate internal string variables.
Error: Module in selected slot is not a 1784-KT2 module.
Error: A 1784-KT2 module has not yet been chosen.
Error: Can no longer write to the results file. Possibly disk is full.
Error: Illegal direct connect port selected.  Retype or use choice list.
Error: Illegal port selected. Retype or use choice list.
Error: Illegal repeat count specified.
Error: Serious fault found in selection rtn.
Error: Loopback cable has not been installed. Offline cancelled.
Error: Loopback cable has been installed and shouldn't be.
Error: Error code returning from diagnostic routine is undefined.
Note: Can no longer write to results file. It has reached maximum size.
Copyright 1990 Allen-Bradley Company, Inc.
This program has been designed to help you
determine whether or not your Allen-Bradley
1784-KT2 Module is functioning properly.

