3Com (R) Corporation LAN Installation Disk
for the 3Com Megahertz LAN PC Card Family
WinCE 2.0 File

You can use the following Windows CE hand-held PCs 
with the LAN PC Card:

Cassiopeia Model # A11 & A20 (SH3)
LG Phenom (SH3)
Sharp Mobilon Model # HC4100 (MIPS)
Phillips Velo Model # 500 (MIPS)
Compaq C-Series (MIPS)
NEC MobilePRO 750C (MIPS)
Hitachi HPW-200EC (SH3)
HP 360LX (SH3)

These hand-held PCs can browse the Internet but 
cannot connect to the network. 

To connect the LAN PC Card and install the driver, 
follow these steps:

1. Establish a connection between the hand-held PC 
   and a Windows 98, Windows 95, or Windows NT PC 
   using a serial cable.

2. Insert the Windows CE CD in your CD-ROM drive.

3. Click Start then Run in the task bar.

3. Insert the LAN Installation Disk 1 in drive a:
   and type:
   a:\win_ce\setup.exe
    
   Setup guides you through  the 3c589 driver 
   and components installation.

   Setup.exe is located in the WIN_CE directory

4. Wait until the installation is complete.

5. Do a warm reset on your hand-held PC and plug 
   in the LAN PC Card in the PCMCIA slot of the 
   hand-held PC.

6. Enter Yes when prompted to use the PC Card.

7. Complete the TCP/IP configuration when prompted.

8. Remove the LAN Installation Disk and restart the hand-held PC.
   Installation is complete.


%VER 1.000.007