Terminal 9000 for the Nokia Communicator

Terminal 9000 allows you to connect a 9000, 9000I, 9110 or 9110I to any RS232 serial device using either cable or Infra-red. You can test it by plugging into a spare serial port on your PC and running Terminal or Hyperterminal on the PC.

If you want to connect to something that is designed to plug into a PC you will need a null modem adapter or a special cable.

Terminal 9000 is supplied on a floppy disk or can be downloaded from the internet. There are 2 stages to the installation.

Terminal 9000 is supplied as a 10 day trial. During this period you will see a "nag" screen warning you that your copy is not registered. If you have purchased the product, you need to purchase a licence to get the registration number which will be unique to your communicator.
You can purchase a licence from http://www.autopage.ltd.uk. After giving your credit card details send an email to Term9K@autopage.ltd.uk containing the serial number of your communicator and we will send your registration key by return.
Select More then Register. You should see two lines of text. On the top line is the number that you must give us to identify your communicator. We will give you a number to type in on the second line instead of No Key. Enter this number then press close. If the number is correct you will see that the Register button has been "greyed out."

Press the Extras button on the 9000 Keyboard. On the 9110 press the "Jigsaw" Button

Select Terminal 9000 then press Select

If you have used Terminal 9000 before, your settings will have been saved. Just press the Start button to connect. If this is the first time, or you need to connect to a device with different settings press More.

Press Port Settings to select the correct port (cable or infra-red). Note that if you select infra-red the remaining settings are not available to you as they are determined automatically.

Each of the settings can be adjusted to suit your purpose by pressing the Change button and selecting the appropriate setting. Default settings are Cable, 9600, None, 7, 1

Misc. Settings allow you to fine-tune the way that data is presented and sent.

Close the settings window, press BACK then press START and you will be connected.