The Delete Logical Drive dialog or the Delete Array - Progress dialog shows a list of failures if selected or cannot be deleted. This table shows how to recover from various failures.
| Cause of Failure | Recovery Procedure |
|---|---|
| Reserved | Release the logical drive on the . |
| Read-only enabled | Disable the read-only status on the logical drive by selecting Change >> Target Logical Drive Permissions >> Disable Read-Only from the . |
| Reconfiguring | Wait until any reconfigure operations are complete before you try to delete the array. |
| Reconstructing disk drives | Wait until any is complete before you try to delete the array. |
| In active copy operation | Wait until any VolumeCopies are complete before you try to delete the array. |
| Offline | Place the array online by selecting Advanced >> Maintenance >> Place Array >> Online . |
| Mirror repository | Deactivate the premium feature by selecting Storage Subsystem >> Enhanced Remote Mirroring >> Deactivate before you try to delete arrays. |