HDD DEMON Parameters:
---------------------

You can set HDD_DMN parameters either  in  INI  file  HDD_DMN.INI  or  by
command line. Some parameters you can set only in INI file. Command  line
has bigger priority.


Only command line parameters are described here. INI file parameters  are
described in file HDD_DMN.INI in same directory as HDD_DMN.EXE.

Note!
Befor you will  run  HDD_DMN,  set  your  own  INI  parameters  and  edit
HDD_DMN.INI !

COMMAND LINE PARAMETERS:
------------------------

HDD_DMN.EXE [/H] [/Ax] [/Pdevname] [/R+(-)] [/U] [/C+(-)] [/T+(-)] [/Bxx]

   /H  /?     ==> Show help
   /Ax        ==> LPTx will be used for ATARI connection
   /Pdevname  ==> Device LPTx or file will be used for ATARI printer
   /R+(-)     ==> Resident mode on / off
   /U         ==> Unload from memory
   /C+(-)     ==> On / Off connecting at the start
   /T+(-)     ==> On / Off screen writes
   /Bxx       ==> xx - Buffer size in kB (1 az 32)


Default parameters: (if you didn't change them in HDD_DMN.INI)

  - LPT2 for ATARI
  - LPT1 for printer
  - resident mode off
  - Connecting at the startup on
  - Screen writes on
  - Buffer size 5 kB



(c) 1997 by MC soft&hard
