LASER.DOC 12/10/90 Compo Software





    Using the ATARI SLM 804 laserprinter with AT-SPEED.

    ===================================================



To use the laserprinter your ST will need 2 or 4 MB of RAM!!!



Install the laserprinter in ATS_INST.PRG. Quit and save the options within the 
program file AT_SPEED.PRG.

Then create a folder. Copy the installed version of AT_SPEED.PRG within this 
folder, also DIAB630.PRG with the font files and SDUMP.PRG (which have been 
supplied with your laserprinter).



Start AT_SPEED.PRG now. The common messages of DIAB630.PRG and SDUMP.PRG will 
appear on the screen.

Now the DOS application is able to print via LPT1, the output will be 
redirected to the ATARI laserprinter on the DMA port.

You may print a hardcopy of the screen by pressing [Shift] and [PrtScr].

Alternatively the printerport (Centronics) may be used via LPT2. If this not 
happens it's possible that:

    -   the laser driver has already been installed (booted from the AUTO 
        folder...) and has been executed for the second time. An error message 
        was shown.

    -   the font files were not loaded because the program couldn't find these 
        files or were incomplete. Error messages will be displayed.

    -   when you use AT-SPEED as a desk accessory the laserprinter cannot be 
        used caused by a different memory configuration.



