.ident	"@(#)proto:locale/C/menus/help/fsalttab	1.3"
.related kbhelp genhelp diskconf filesys fsdisk fssize fstype
.title Help: File Systems Option -- Alt/Sector File System
ABOUT THIS OPTION
Use the File Systems menu to check and change how file
systems are configured.

ALT/SECTOR SLICE
The Alt/Sector slice contains a mapping of the bad blocks to
good blocks and is used by the disk driver.  The ALTS TABLE
slice must be at least one cylinder (1 MB on SCSI systems)
and have a slice file system type.

If your system suffers from frequent I/O errors, increasing
the size of the Alt/Sector slice may improve the system
reliability.
                                   (CONTINUED)
.page
If your system or disk has its own alternate sector subsystem
(for example, a SCSI disk) then you can reduce the size of the
Alt/Sector slice.

CHANGING THE FILE SYSTEM TYPE OR DISK OPTION
Do the following to change the disk for a particular file
system:
    1.  Use the <Tab> or up/down arrow keys to move to the
        desired field.
    2.  Press <F2> to view the choices.
    3.  Use the <Tab> or up/down arrow keys to move the
        asterisk (*) to your choice.
    4.  After selecting your choice, press <Enter> to return
        to the File Systems menu.
                                   (CONTINUED)
.page
CHANGING THE FILE SYSTEM SIZE 
Do the following to change the size of a file system:
    1.  Use the <Tab> or up/down arrow keys to move to
        the desired field.
    2.  Type in the value.

EXITING THE FILE SYSTEMS MENU
When you are finished viewing or changing file system
information, press <F10> to return to the Disk
Configuration menu.

EXITING HELP
Press <Esc> to return to the File Systems menu.
Press <F1> for more help.
