#ident	"@(#)proto:locale/C/menus/txtstrings	1.1.6.120"

FOOTER_HEIGHT=1
Yes=yes
No=no
Y=y
N=n
Enter_yesno="Please enter $Yes or $No"
MiniWelcome="Welcome to maintenance mode.

Your hard disk filesystems, if any, are mounted under /mnt.
If you want to run a shell from your hard disk root filesystem,
use the \"chroot\" command (chroot /mnt /bin/sh).

To exit maintenance mode just type \"exit.\"
"
# Long names for packages must not exceed 32 characters.
# This restriction insures that any two package names 
# side-by-side will not overflow the right margin of pkgs menu.

as_name="Application Server"
pe_name="Personal Edition"
eval LONG_NAME="\"\$${SET_NAME}_name\""
base_name="Base System"
lp_name="Printer Support"
nsu_name="Network Support Utilities"
acp_name="Enh. Application Compatibility"
dtxt_name="Graphics Utilities"
display_name="Graphics Display Support"
atm_name="Adobe Type Manager(TM)"
desktop_name="Desktop Manager"
cmds_name="Advanced Commands"
nics_name="Network Interface Card Support"
oam_name="OA&M"
bkrs_name="Extended Backup and Restore"
terminf_name="Terminfo Utilities"
inet_name="Internet Utilities (TCP/IP)"
dfs_name="Distributed File System Util."
rpc_name="Remote Procedure Calls Utilities"
nfs_name="Network File System Utilities"
nis_name="Network Information Service"
audit_name="Auditing"
acl_name="Access Control Lists"
dynatext_name="DynaText Document Browser"
manpages_name="Traditional Manual Pages"
ASdocs_name="Application Server Documentation"
frASdocs_name="French AS Documentation"
itASdocs_name="Italian AS Documentation"
deASdocs_name="German AS Documentation"
esASdocs_name="Spanish AS Documentation"
jaASdocs_name="Japanese AS Documentation"
PEdocs_name="Personal Edition Documentation"
frPEdocs_name="French PE Documentation"
itPEdocs_name="Italian PE Documentation"
dePEdocs_name="German PE Documentation"
esPEdocs_name="Spanish PE Documentation"
jaPEdocs_name="Japanese PE Documentation"
jaSDKdocs_name="Japanese SDK Documentation"
bsdcompat_name="BSD Compatibility"
dtxtfonts_name="Graphics Supplemental Fonts"
dtclients_name="Applications and Demos"
nwnet_name="NetWare Networking"
nuc_name="NetWare UNIX Client"
merge_name="Advanced Merge"
frmerge_name="French Advanced Merge"
itmerge_name="Italian Advanced Merge"
demerge_name="German Advanced Merge"
esmerge_name="Spanish Advanced Merge"
jamerge_name="Japanese Advanced Merge"
bns_name="Basic NetWare Server"
ls_name="Language Supplement"
mele_name="Modified English Lang. Extension"
frle_name="French Language Extension"
itle_name="Italian Language Extension"
dele_name="German Language Extension"
esle_name="Spanish Language Extension"
jale_name="Japanese Language Extension"
jadicopft_name="Japanese DICOP Fonts"
ccs_name="Optimizing C Compilation System"
osmp_name="OS Multiprocessor Support"
server_name="Server Utilities"
nwsup_name="NetWare Integration Kit"
platform_name="Additional Platform Utilities"
netmgt_name="Network Management"
ADVANCED_name="ADVANCED UNIXWARE PACKAGES"
BASIC_name="BASIC UNIXWARE PACKAGES"
BLANK_name=" "
GRAPHICS_name="GRAPHICS PACKAGES"
NETWORK_name="NETWORKING PACKAGES"

GENERIC_HEADER="UnixWare $LONG_NAME ${VERSION} Installation"
GENERIC_BAD_CHOICE="Please use F2 for choices."
GENERIC_CONTINUE_CHOICE="Continue Installation"

GENERIC_FOOTER="Use up/down arrow keys and ENTER to select"
GENERIC_CHOOSE_FOOTER="$GENERIC_FOOTER."
GENERIC_MENU_FOOTER="$GENERIC_FOOTER."
AUTOMERGE_FOOTER="$GENERIC_FOOTER."
BLKTYPE_FOOTER="$GENERIC_FOOTER."
DATE_NODE_FOOTER="$GENERIC_FOOTER."
FDFS_FOOTER="$GENERIC_FOOTER, F1=Help."
INETINST_MENU_FOOTER="$FDFS_FOOTER"
MAIN_FOOTER="$GENERIC_FOOTER, F1=Help, F9=maintenance mode."
MOREHELP_FOOTER="$GENERIC_FOOTER or Esc to exit help."
GENERIC_FORM_FOOTER="Use TAB/arrow keys to move, F1=Help, F2=Choices, F10=Apply."
GENERIC_WAIT_FOOTER="Please wait."
INTL_DIRECTIONS="$GENERIC_FORM_FOOTER"

NonBoot=" "
Boot=Active

# For use in "asknodename" script
System_Name="System Node Name:"
SHORTNAME="The System Node Name must be at least 3 characters long."
BADCHARNAME="The System Node Name must consist of ASCII letters and numerals."
NODEPROMPT="Type the node name for your system and press ENTER."
INITIAL_NODE_TITLE="Type System Node Name"

# For use in "asktime" script
SYSTEM_TIME_MSG="The current system time is"
CONF_TIME_MSG="The time you configured is"
TIME_ERR_TZ="Please use F2 to select a timezone."
TIME_DIRECTIONS="Use TAB to move, F1=Help, F2=Timezone Choices, F10=Apply."
Year=Year
Month=Month
Day=Day
Hour=Hour
Minute=Minute
Timezone=Timezone
AREA_CHOICE_TITLE="Continent"
AREA_CHOICE_FOOTER="Select your continent, then press ENTER."
TZ_CHOICE_TITLE="Timezone"
TZ_CHOICE_FOOTER="Use arrow keys to select a timezone, then press ENTER."
NASAname="North America/South America"
EURname="Europe"
ASIAAUSname="Asia/Australasia"

# For use in "asktime" script.
# Attention localizers, the MAXTZ_NAME variable must be set equal to 
# the maximum number of characters in a translated timezone name. 
# Examine field 1 of each timezone pair defined in EURtz, NASAtz and 
# ASIAAUStz, below. Set MAXTZ_NAME equal to the maximum length of field 1.

MAXTZ_NAME=20

# For use in "asktime" script. 
# Attention localizers, field 2 of each timezone pair below must not 
# be translated!
# Fields 1 and 2 must be separated by TABs, not spaces.
EURtz="GB-Eire	GB-Eire
CET	CET
EET	EET
Poland	Poland
Turkey	Turkey
W-SU	W-SU
Iceland	Iceland
WET	WET"
	
# For use in "asktime" script. 
# Attention localizers, field 2 of each timezone pair below must not 
# be translated!
# Fields 1 and 2 must be separated by TABs, not spaces.
NASAtz="US/Eastern	US/Eastern
US/Central		US/Central
US/Mountain		US/Mountain
US/Pacific		US/Pacific
US/Yukon		US/Yukon
US/East-Indiana		US/East-Indiana
US/Arizona		US/Arizona
US/Hawaii		US/Hawaii
Canada/Newfoundland	Canada/Newfoundland
Canada/Atlantic		Canada/Atlantic
Canada/Eastern		Canada/Eastern
Canada/Central		Canada/Central
Canada/Mountain		Canada/Mountain
Canada/Pacific		Canada/Pacific
Canada/Yukon		Canada/Yukon
Canada/East-Saskat	Canada/East-Saskat
MST			MST
HST			HST
EST			EST
Mexico/BajaNorte	Mexico/BajaNorte
Mexico/BajaSur		Mexico/BajaSur
Mexico/General		Mexico/General
Brazil/East		Brazil/East
Brazil/West		Brazil/West
Brazil/Acre		Brazil/Acre
Brazil/DeNoronha	Brazil/DeNoronha
Chile/Continental	Chile/Continental
Chile/EasterIsland	Chile/EasterIsland"
	
# For use in "asktime" script. 
# Attention localizers, field 2 of each timezone pair below must not 
# be translated!
# Fields 1 and 2 must be separated by TABs, not spaces.
ASIAAUStz="Israel	Israel
Japan			Japan
Singapore		Singapore
HongKong		HongKong
New-Zealand		New-Zealand
Australia/Tasmania	Australia/Tasmania
Australia/Victoria	Australia/Victoria
Australia/NSW		Australia/NSW
Australia/Queensland	Australia/Queensland
Australia/North		Australia/North
Australia/West		Australia/West
Australia/Sturt		Australia/Sturt
Australia/Yancowinna	Australia/Yancowinna
Australia/LHI		Australia/LHI
China			China
Korea			Korea
ROC			ROC"

# For use in "choose" script
CHOOSE_TITLE="Choices"

CHANGE_NAME="View or Change ^System Node Name"
TITLE_NAME="System Node Name"
CHANGE_TIME="View or Change ^Time and Date"
TITLE_TIME="Date and Time"

# For use in "fd" script
SAYCYLS="Number of Cylinders: "
SAYUSEDCYLS="Currently Used: "
FD_ERR_ADDR_TOOBIG="Cylinder address is greater than disk size."
FD_FOOTER="Reading disk geometry ...."
FD_PART_CHOOSE_FOOTER="Please select a partition type and press ENTER."
FD_FS_CHOOSE_FOOTER="Please select a filesystem type and press ENTER."
FD_ERR_STATUS="Please use F2 to select a partition status."
FD_ERR_TYPE="Please use F2 to select a partition type."
FD_ERR_PCT="A percentage must be a number between 1 and 100."
FD_ERR_LENGTH="The length must be a number between 1 and \${DISK_NUMCYL[disk]}."
FD_ERR_PRE5DOSPCT="A Pre-5.0 DOS partition can not be more than 10 percent."
FD_ERR_OVER_100="The specified number of cylinders is too large for partition."
FD_ERR_BAD_ADDRS="Cylinder addresses are overlapping."
FD_ERR_UNDEF="Unspecified size for partition \$i."
FD_ERR_DISKNO="Please type 1 or 2"
PART_CHOOSE="Choose Type"

# Do not translate the following five strings into another language.
UNIX="UNIX System"	#Do not translate
DOS="DOS"		#Do not translate
SYSCONFIG="System"	#Do not translate
PRE5DOS="pre-5.0DOS"	#Do not translate
other="Other"		#Do not translate

unused="unused"
Partition="Partition"
Type="Type"
Status="Status"
Percentage="%"
Start="Start"
End="End"
Length="Length"
Cylinders="Cylinders"
MB="Size (MB)"
YN="($Yes/$No)"

# For use in "fd_fs" and dischk scripts
FDISK_1_ENTRY="Disk 1 Partitions"
FDISK_2_ENTRY="Disk 2 Partitions"
FSCONF_ENTRY="File Systems"
DISKCHK_ENTRY="Disk Operations"
MENU_EXIT="Return to the Previous Menu"

DiskCheck="Functions"
DCHK_1="Perform surface analysis on disk1:"
DCHK_2="Perform surface analysis on disk2:"
DO_BOOTSECTOR="Overwrite system master boot code:"

# For use in "fs" script
ATTR_FOOTER="Use TAB/arrow keys to move, F1=Help, F2=Choices, F6=Adv. Opts, F10=Apply."
FS_ERR_TYPE="Please use F2 to select a file system type."
FS_ERR_TOOSMALL="Please type a number greater than or equal to \$min for size."
FS_ERR_NOTNUM="Please type a number."
FS_ERR_TOOBIG="The file system sizes you have chosen are too big for disk \$dsk."
FS_ERR_HUGE="The maximum allowed size (in MB) is"
FS_ERR_DISKNUM="The disk number you entered is invalid."
FS_ERR_NOALTS="The Alternate Sector Table Slice for disk 2 is not defined."
FS_BLKSIZE_ERR="The designated block size is incorrect for file type."
FS_INODE_ERR="Limited inodes not supported on this filesystem type."
FSTYPE_CHOOSE="Choose FileSystem"
BLKTYPE_CHOOSE="Choose Block Size"
FS_AVAIL="Available Size (MB): "
FS_USED="Currently Used (MB): "
FS_DISK1="Disk 1: "
FS_DISK2="Disk 2: "
off="off"
slice=slice
FileSystem="File System"
Attribute="Attribute"
fstypeDESC="FileSystem Type"
blocksDESC="Filesystem Block Size"
inodesDESC="64K Inodes Limit"
Description="Description"
standDESC="Boot File System"
swapDESC="Swap Slice"
rootDESC="Root File System"
usrDESC="usr File System"
homeDESC="User File System"
dumpDESC="Dump Slice"
varDESC="Add-ons File System"
home2DESC="2nd User File System"
tmpDESC="Temporary File System"
altsDESC="Alt/Sector Slice"
privDESC="Private Volume"
FsType="Type"
Size="Size"
Disknum="Disk"
INODE_CHOICES="no yes"

# For use in gauge
INST_GAUGE_TITLE="Installation Progress"
DISK0_GAUGE_TITLE="Checking Primary Hard Disk"
DISK1_GAUGE_TITLE="Checking Secondary Hard Disk"

# For use in "helpwin" script
FIRST_PAGE_FOOTER="F1=More help, Page Down, Esc to exit help"
MIDDLE_PAGE_FOOTER="F1=More help, Page Down, Page Up, Esc to exit help"
LAST_PAGE_FOOTER="F1=More help, Page Up, Esc to exit help"
ONLY_PAGE_FOOTER="F1=More help, Esc to exit help"
MOREHELP_TITLE="Related help topics"

# For use in "inst" script
INSTMSG="

  Installing Software  

      Please Wait

"
SURFACE_SCAN_TEXT="
 Checking the active UNIX partition 
 of your hard disk for bad blocks.

 The capacity of your disk governs
 how long this process will take.
"

DISKSETUP_DISK0_MSG="
 Checking the Primary Hard Disk... 
"
DISKSETUP_DISK1_MSG="
 Checking the Secondary Hard Disk... 
"

DISKSETUP_FAULT="
Fatal Error:  A failure occurred while trying to set up a hard disk.

Possible reasons for the failure are

  - the hard disk or hard disk controller is damaged
  - the data cable between the disk and the controller is damaged
  - the external bus (if any) is incorrectly terminated

$HANDBOOK
"

MKFS_WAIT="
 Making File Systems... 
"
MKFS_FAILED="
Fatal Error:  A failure occurred while trying to make
file systems on your hard disk.

Possible reasons for the failure are

  - the hard disk or hard disk controller is damaged
  - the data cable between the disk and the controller is damaged
  - the external bus (if any) is incorrectly terminated

$HANDBOOK
$CONTROL_D
"

REBUILD_MSG="

    Building the operating system

             Please Wait

  (This might take several minutes)  

"

# For use in "intl" script
LOCALES="None (USA)
Argentina
Australia
Austria
Belgium/Dutch
Belgium/French
Brazil
Canada/English
Canada/French
Chile
Denmark
Finland
Finland/Swedish
France
Germany
Hong Kong
Iceland
India
Ireland
Italy
Mexico
Netherlands
New Zealand
Norway
Portugal
Singapore
Spain
Sweden
Switzerland/French
Switzerland/German
Switzerland/Italian
UK
USA
Venezuela"
Country_Language="Country/Language"
Keyboard="Keyboard"
Other_Countries="Additional Support"
None=None
Related_Countries="Related countries"
All_Countries="All countries available"
BADRELATED="$GENERIC_BAD_CHOICE"
BADLOCALE="Please use F2 to select a country."
BADKEYBOARD="Please use F2 to select a keyboard."

# For use in "keyboard" script
# Field 2 below must not be translated!
# Fields 1 and 2 must be separated by TABs, not spaces.
KEYBOARDS="Belgian	BE
Canadian (IBM 445)	CA
Danish			DK
Dutch			NL
Finnish			SE
French			FR
French-Canadian		fr_CA
German			DE
Icelandic		IS
Italian			IT
Italian (IBM 142)	IT2
Japanese (A01)		A01
Japanese (AX)		AX
Latin-American		es
Mexican			es
Norwegian		NO
Portuguese		PT
Spanish			ES
Swedish			SE
Swiss-French		fr_CH
Swiss-German		de_CH
UK English		GB
US (ASCII)		NONE
US (Latin-1)		US"
KEYBOARD_FOOTER="Use arrow keys to select a keyboard and then press ENTER."
KEYBOARD_ENTRY="Select Keyboard Type"

# For use in "main" script
MAIN_TITLE="Install Menu"
SAVE_EXIT="^Accept All Settings and Install Now"
SAVE_EXIT2="Accept All Settings and Install Now"
SAVE_EXIT_PROMPT="Installation will begin when you press ENTER."
EXIT_ERR="Select \"$SAVE_EXIT2\" to begin installation."
CANCEL="^Cancel Installation and Shut Down System"
CANCEL2="Cancel Installation and Shut Down System"
CANCEL3="C^ancel Installation and Shut Down System"
CANCEL_PROMPT="Select this to cancel installation and shut down the system."
NODE_PROMPT="Select this to view or change the system node name."
TIME_PROMPT="Select this to view or change the time or date."
PKGPROMPT="Select this to view or change the list of packages to install."
PKGENTRY="View or Change ^Package Selection"
PKGENTRY2="View or Change Package Selection"
RESET_PROMPT="Select this to restart installation from the beginning."
RESET_ENTRY="^Restart Installation"
HARD_DISK_PROMPT="Select this to view or change the filesystems or partitions of your hard disk."
HARD_DISK_ENTRY="View or Change ^Disk Configuration"
HARD_DISK_ENTRY2="View or Change Disk Configuration"
HARD_DISK_ENTRY_TITLE="Disk Configuration"
INTL_PROMPT="Select this to view or change the keyboard type."
INTL_ENTRY="View or Change ^Keyboard Type"
INTL_ENTRY2="View or Change Keyboard Type"

# For use in "pkgs" script
PKG_TITLE="Package Selection"
PKG_FOOTER="F1=Help, F5=select ALL, F6=select DEFAULT, Spacebar=toggle, ENTER=Return."
PKG_REQ_MSG="The \$CURPKGNAME Package is required for all installations."
NOND_PKG_REQ="This package must be selected for non-destructive installation."
NOPARAM="       There are no user visible parameters associated   
              with the \$CURPKGNAME package.

              Press ENTER to continue."

NOSELECT="To edit parameters, you must select the package first"

# For use in "securevt" script
BADSERIAL="
   The serial number you entered is incorrect.   

             Press ENTER to continue.
"
SERIAL_PROMPT="Please type the serial number of your copy of UnixWare:"
SERIAL_TITLE="Enter Serial Number"

HANDBOOK="See the UnixWare Installation Handbook for more information."
Welcome=" Welcome to UnixWare ${LONG_NAME} ${VERSION} Installation!

 To install UnixWare ${VERSION} you will be asked several
 questions.  Where possible, default values are provided.

 When you reach the ${MAIN_TITLE}, you can review and change
 any setting or cancel the installation.

 No permanent changes are made to the system until you select 
 \"${SAVE_EXIT2}\" from the ${MAIN_TITLE}.

 Please refer to the bottom of each screen for instructions;
 most screens also allow you to press the F1 key for help.

 $HANDBOOK"

WELCOME_FOOTER="Press ENTER to continue."

# Minimum Hardware Error message
DISKerror="
Fatal Error: Either UnixWare could not detect any hard disks, or
your primary hard disk is too small.  Installation cannot continue.

You must have at least 80 MB of primary hard disk space before
restarting the installation process.

$HANDBOOK
$CONTROL_D
"
MINIHW_CHOOSE="
Retry loading HBA Drivers and/or entering the DCU
$CANCEL2
"
INSTERR="Press ENTER to end installation."

# Hardware Error Stop message
HWerror="
ERROR:  Errors have been detected on your computer system
and therefore installation cannot continue.

$HANDBOOK

"
# For use in useanswers
FDISKerror="
 ERROR:  An error was detected while setting up your disk
 partitions and therefore installation cannot proceed.

 You may retry installation after you have corrected the
 problem.

 $HANDBOOK 
"
FDISKERROR_FOOTER="$WELCOME_FOOTER"

# For use in "floppy2" script
HBAFLOP_EXPLAIN=" UnixWare ${VERSION} includes a diskette labeled \"Host Bus Adapter Drivers\". This
 diskette contains common device drivers for popular Host Bus Adapters (HBA) 
 and other devices.  Hardware vendors may provide additional HBA diskettes. 
 If this is the case, please check the instructions that came with the other 
 HBA diskette(s) to determine the order in which you must insert the disk-
 ettes.  $HANDBOOK

 If HBA diskette(s) are needed, or if you are not sure:
   1. Remove the Install Diskette from the drive.
   2. Insert the first HBA diskette and press ENTER.

 If you are sure that your system does not need any HBA diskettes:
   1. Remove the Install Diskette from the drive.
   2. Select \"$GENERIC_CONTINUE_CHOICE\" and press ENTER."

HBAFLOP_MORE="
 If you have additional HBA diskettes:
   1. Insert the next HBA diskette and press ENTER.

 If you do not need to use additional HBA diskettes:
   1. Remove the HBA diskette from the drive.
   2. Select \"$GENERIC_CONTINUE_CHOICE\" and press ENTER.
"
HBAFLOP_CHOOSE="Install Host Bus Adapter Drivers
$GENERIC_CONTINUE_CHOICE"
HBAFLOP_CHOOSE_MORE="Install Another HBA Diskette
$GENERIC_CONTINUE_CHOICE"
HBAERROR_CHOOSE="Retry this HBA diskette
Cancel this HBA diskette"
HBA_NOROOM="
There is not enough space to load the \$hbaname module.  This 
module may not be needed in your system to complete installation 
and therefore may be skipped.  Not loading this module will make
all devices controlled by this module inaccessible during 
installation.
"
MINHBA_CHOOSE="Skip this HBA driver.
$CANCEL2"

FLOPPY_MOUNT_FOOTER="Loading from diskette....."
FLOPPY_IHVHBA_FOOTER="Loading HBA module from diskette....."
FLOPPY_ERROR_FOOTER="Error when loading HBA module...."
FLOPPY_MOUNT_ERROR="Error when mounting diskette...."
REMOVE_FLOPPY_FOOTER="Please remove diskette now."
IHVLOADFOOTER="Loading \$loadname "
NOIHVS="No HBA Module was selected from this diskette."
IHVSELECT=" Loading selected HBA modules. "
DUPIHVS="
The diskette has already been loaded.
Loading from this diskette has been terminated.
"
HBA_REINSERT="
You must now reinsert the HBA diskette labeled
"
HBA_LOAD_FOOTER="Loading \$HBA_PROMPT "
HBA_FOOTER="Press ENTER when ready."
HBA_EMSG1="
Cannot install HBA diskette.  Try again.
"
HBA_EMSG2="
You have inserted the wrong HBA diskette.  Try again.
"
HBA_EMSG3="
This diskette does not seem to be a HBA diskette.  Try again.
"
HBA_EMSG4="
None of the drivers on this HBA diskette are needed on your system.
"
IHVwait="

Please wait while the HBA 
hardware drivers are loaded. 

"
Floppy2Wait="

Please wait while the system 
hardware drivers are loaded.

"
cdrom_prompt="
 Please insert the $LONG_NAME CD
 into the CD-ROM drive and press ENTER.

 If you have more than one CD-ROM drive, make 
 sure all of them are empty except the one
 that contains the $LONG_NAME CD.

 If the CD is already in the drive, just
 press ENTER.
"
tape_prompt="
 Please insert the $LONG_NAME tape
 into the tape drive and press ENTER.

 If you have more than one tape drive, make 
 sure all of them are empty except the one
 that contains the $LONG_NAME tape.

 If the tape is already in the drive,
 just press ENTER.
"
diskette_prompt="
Please insert the diskette labeled \"Installation Tools\"
into the 3.5-inch diskette drive and press ENTER when ready.
"
GET_TOOLS_WAIT="

 Please wait while the system 
 software drivers are loaded. 

"
# Disk size warning messages
DISK0warn="
The current disk partitioning is unacceptable because of one of following:

	-There is no UNIX System Partition.
	-The UNIX System partition is not ACTIVE.
	-The UNIX System partition is not at least 80 MB.

"
DISK0WARN="Press ENTER when ready and try again."
DISK1warn="
If you choose to create a UNIX System partition on your secondary hard
disk, it must be at least 40 MB.
The current partition is unacceptable because of one of following:

	-There is no UNIX System Partition.
	-You must designate one ACTIVE UNIX System partition.
	-The UNIX System partition is not at least 40 MB.

"
DISKWARN1="Press ENTER when ready and try again."
HighCYLS="
The current ACTIVE UnixWare partition will not be a BOOTABLE 
 partition.  The entire /stand slice of the ACTIVE partition 
 on disk 1 must be below cylinder number 1024.  
"
FOOTER_HIGHCYLS="Warning, partition is unbootable."
#strings for reboot
REBOOT_MSG="
  UnixWare ${VERSION} installation is complete.  Applications and other
  software sets can be installed using the available tools after the
  computer is restarted.

  ****MAKE SURE THE BOOT DRIVES (DISKETTE AND/OR CD-ROM) ARE EMPTY***  

  When you press ENTER, the system will be shut down and restarted.
"
UPGRADE_WARN="
  If you are upgrading from UnixWare 1.1 or UnixWare 1.1.2 to UnixWare 2.01,  
  or performing an overlay, your UnixWare 2.01 system will not include the
  NetWare UNIX Client (nuc) package or the NetWare Networking (nwnet) package. 

  After your UnixWare 2.01 system is up and running, you can install the
  NetWare UNIX Client and NetWare Networking packages using the
  Application Installer from the desktop, or by using the pkgadd command.
"
# the following used by askfdisk function
ASKFDISK="
NOTICE:  Your computer does not have the required minimum 80 MB
primary hard disk partition and therefore must be repartitioned.

You must create at least 80 MB of primary hard disk space before
continuing the installation.

$HANDBOOK

		     Press ENTER when ready.

"

NOND_CHOOSE="Perform Nondestructive Installation
Perform Destructive Installation
$CANCEL2"

NOND_EXPLAIN=" The active UNIX partition contains an installed UnixWare system. 

   You can choose a \"nondestructive\" installation of UnixWare ${VERSION}
   over the existing UnixWare system.  This will preserve the user
   files, installed applications, and selected system files.

   Or you can choose a \"destructive\" installation, which will enable you
   to modify disk partitioning and set your active partition. All data on 
   the active partition will be erased before UnixWare ${VERSION} is installed.

 If you do not have a recent system backup, please cancel the install- 
 ation now, back up your system, and start the installation again."

NOND_FOOTER="$GENERIC_FOOTER."
NOND_ENTRY="Destructive/Nondestructive Installation"

NOND_PREP_MSG="

Saving configuration files

  for later processing.

"

AUTOMERGE_CHOOSE="Automatically combine the files.
Do not automatically combine the files."

AUTOMERGE_EXPLAIN="You can have the installation merge your saved configuration files after
the installation is complete, or you can do it yourself.  If you choose to
do it yourself, a mail message will be sent describing where the saved
files are."

AUTOMERGE_ENTRY="Choose merge option"

# Server Utilities (server)-these strings are used by the ii_* scripts in PROTO
inet_illegal_netmask="Invalid Netmask Entered"
inet_illegal_addr="Invalid IP Address Entered"

INETINST_CHOICE="Select Installation Method"
NOMEDIA="Please select installation method."

# This can be used on message line with Inst Method screen
# when more help text is added
INST_MSG="If device you need to use is not listed, press F1 for Help."

INETINST_CDROM="Install from CD-^ROM"
INETINST_CDROM_PROMPT="Install from CD-ROM"
INETINST_DISKETTE="Install from ^Diskette"
INETINST_DISKETTE_PROMPT="Install from Diskette"
INETINST_SPX="Install from ^SPX Network Server"
INETINST_SPX_PROMPT="Install from a Server on your SPX Network"
INETINST_SPX_SERVER="Name of Install Server "
INETINST_SPX_EXPLAIN="Name of Install Server - Number of hops to server is in brackets."
INETINST_SPX_TITLE="Select Install Server "
INETINST_SERVER_DIRECTIONS="Use arrow keys to select an Install Server and then press ENTER."
INETINST_TAPE="Install from ^Cartridge Tape"
INETINST_TAPE_PROMPT="Install from Cartridge Tape"
INETINST_TCP="Install from ^TCP Network Server"
INETINST_TCP_PROMPT="Install from a Server on your TCP Network"

#These CONFIRM messages are separate to facilitate translation.

CONFIRM_cdrom="
 You have chosen to install from 
    CD-ROM.  Is this correct?
"
CONFIRM_tape="
  You have chosen to install from
 Cartridge Tape.  Is this correct? 
"
CONFIRM_diskette="
 You have chosen to install from 
   Diskette.  Is this correct?
"
CONFIRM_tcp="
         You have chosen to install from
 a Server on your TCP Network.  Is this correct? 
"
CONFIRM_spx="
         You have chosen to install from
 a Server on your SPX Network.  Is this correct? 
"
CONFIRM_yes="Yes, continue the installation."
CONFIRM_no="No, go back to the previous screen."

II_FLOPPY_FOOTER="Loading Networking Hardware Information from Diskette..."
II_ERR_MSG=" You have not supplied values for the 
 following field(s), which are required to 
 proceed with this installation.  Press 
 ENTER to return to the current 
 screen, and enter a valid value for: 

  \${II_FLD[0]}
  \${II_FLD[1]}
  \${II_FLD[2]}
  \${II_FLD[3]}
  \${II_FLD[4]}
  \${II_FLD[5]}"

II_MULTI_CARD="
 More than one Network Interface Card has been 
 detected.  On the next screen, you will be asked 
 to provide the slot number of the card you want 
 to use for this Network Installation. 

 Press ENTER to continue. "

INETINST_TITLE="Network Install"
INETINST_HW_SEL_TITLE="Select Networking Hardware"
INETINST_HW_SEL_PROMPT="         Networking Card "
INETINST_HW_SEL_FOOTER="Select a networking card,  TAB to move,  F1=extended list,  ENTER=apply"

INETINST_HW_CONF_TITLE="Configure Networking Hardware"
INETINST_HW_CONF_FOOTER="Configure Networking Hardware"

INETINST_IRQ_PROMPT="Interrupt Vector "
INETINST_IO_PROMPT="I/O Address Range "
INETINST_RAM_PROMPT="Memory Address Range "
INETINST_CABLE_PROMPT="Cable Type "
INETINST_SLOT_PROMPT="Slot Number "
INETINST_DMA_PROMPT="DMA Channel "
INETINST_IRQ_DIRECTIONS="Use TAB to select an Interrupt Vector and then press ENTER."
INETINST_IO_DIRECTIONS="Use TAB to select an I/O Address range and then press ENTER."
INETINST_RAM_DIRECTIONS="Use TAB to select a Memory Address range and then press ENTER."
INETINST_CABLE_DIRECTIONS="Use TAB to select a Cable Type and then press ENTER."
INETINST_SLOT_DIRECTIONS="Use TAB to select a Slot and then press ENTER."
INETINST_DMA_DIRECTIONS="Use TAB to select a DMA Channel and then press ENTER."

INETINST_BAD_IRQ="Invalid IRQ; Press F2 for Choices"
INETINST_BAD_IO="Invalid I/O Address Range; Press F2 for Choices"
INETINST_BAD_RAM="Invalid Memory Address Range; Press F2 for Choices"
INETINST_BAD_CABLE="Invalid Cable Type; Press F2 for Choices"
INETINST_BAD_SLOT="Invalid Slot; Press F2 for Choices"
INETINST_BAD_DMA="Invalid DMA Channel; Press F2 for Choices"

INETINST_NET_CONF_TITLE="Configure Networking Protocol"
INETINST_UNAME_TITLE=" System Node Name"
INETINST_MY_INET_TITLE="System IP Address"
INETINST_MY_MASK_TITLE="   System Netmask"
INETINST_ROUTER_INET_TITLE="Router IP Address"
INETINST_SERVER_INET_TITLE="Server IP Address"

INETINST_UNAME_PROMPT="Type the name of this system"
INETINST_MY_INET_PROMPT="Type the IP Address of this system"
INETINST_MY_MASK_PROMPT="Type your Netmask (i.e.: 0xffffff00 or 255.255.255.0)"
INETINST_ROUTER_INET_PROMPT="Type the IP Address of your Router"
INETINST_SERVER_INET_PROMPT="Type the IP Address of your Install Server"
INETINST_FORM_FOOTER="Use TAB key to move, F1=Help, F10=Apply."

INETINST_INSERT_AGAIN="    Either you have not inserted a 
  diskette or the diskette you have 
     inserted is not the Network 
   Installation Utilities diskette. 

"

INETINST_INSERT_FLOPPY="
  Make sure the Network Installation 

 Utilities diskette is in the diskette 

       drive and press ENTER. 
"

INETINST_REMOVE_FLOPPY="

  Please remove the Network Installation 

 Utilities diskette from the diskette drive 

       and press ENTER to continue 

"

INETINST_HW_CHOICES_TITLE="Supported Networking Cards"

# For use in "netinst" script
INETINST_WAIT_MSG="Configuring your network will take a few minutes.  Please wait."

INETINST_LOADING_MODULES="

 Loading Networking Drivers 

        Please Wait 

"
# For use in "netinst" script
INETINST_CONFIGURE_NETWORK="

 Configuring Network 

     Please Wait 

"

# For use in "netinst" script
INETINST_COPY_WAIT="

 Loading system installation utilities 

             Please Wait 

"
# For use in "netinst" script
INETINST_MODLOAD_FAIL=" Could not load this driver: 
"
INETINST_TCPLOAD_FAIL=" Could not load the TCP kernel module: "
INETINST_SPXLOAD_FAIL=" Could not load the SPX kernel module: "
INETINST_OPENDEV_FAIL=" Could not open this device: 
"
INETINST_UNAME_FAIL=" Could not set system node name."
INETINST_SLINK_FAIL=" Could not link STREAMS modules for TCP."
INETINST_NWDISC_FAIL=" Could not perform nwdiscover."
INETINST_NPSD_FAIL=" Could not start npsd."
INETINST_SERVER_FAIL=" Could not locate install server."
INETINST_IFCONFIG_FAIL=" Could not bring up network interface."
INETINST_ROUTE_FAIL=" Could not set route to network."
INETINST_PING_FAIL=" Could not contact your install server."
INETINST_NET_FAILURE=" There was a problem configuring your 
 network.  When you press the ENTER key, 
 the system will be rebooted. Please 
 check the Troubleshooting appendix in 
 the Installation Handbook to fix the 
 following problem: 

"

INETINST_NO_IRQ="All IRQs supported by your networking card 
 are currently in use by other devices."
INETINST_NO_IO="All I/O Address Ranges supported by your
 networking card are currently in use by other
 devices."
INETINST_NO_RAM="All Memory Address Ranges supported by your 
 networking card are currently in use by other
 devices."
INETINST_NO_DMA="All DMA Channels supported by your networking 
 card are currently in use by other devices."

II_GOBACK_MSG="
 After configuring your network, your Install Server 
 was not able to be reached.  You may go back and check 
 the values you entered on the Configure Networking 
 Protocol screen or cancel the installation and reboot. 
 If you choose to go back, you may want to check that 
 your network cable is securely plugged in and that the 
 Install Server you selected is up on the network. 
"
II_GOBACK_YES="Go back to Configure Networking Protocol"
II_GOBACK_NO="Cancel Installation and Reboot System"

II_FRAME_TITLE="Select Frame Type"
II_MULTI_FRAME="
 There is more than one frame type in use on your network. 
 You must select which to use in configuring your system. 
 In order for your installation to be successful, there 
 must be at least one install server that uses the frame 
 type you select.  If you are not sure which to choose, 
 contact your network administrator. 
"
# The following block of text is used by osmp.req.sh and osmp.post.sh.
# These scripts are installed by the osmp package and run by inst.gen
# before rebuild is run. These scripts provide menus for platform
# specific information and prompt for a PSM floppy.

PSM_WIDTH=70
PSM_DEPTH=18

PSMLIST="No MP Support
Compaq SystemPro/ProLiant
Intel MP Specification
Tricord PowerFrame
Corollary Cbus
AST Manhattan
Olivetti LSX 5050
Platform Support Module Package"

PSM_STRING="PSM"

PSM_FOOTER="Press ENTER to continue, F5 to select a platform support module"

PSM_RFOOTER="Use arrow keys to select a platform support module and then press ENTER."

PSM_ENTRY="Choose Platform Support Module"

PSM_MSG1="
The UnixWare detection scheme has identified the
"

PSM_MSG2="
module as the hardware-specific multi-processor platform
support module that should be installed.  By pressing F5,
you can choose to install a different platform support
module, no module at all, or a module from a Platform Support
Module (PSM) package diskette.  If you press ENTER, the
"

PSM_MSG3="
module will be installed.
"

NOPSM_MSG="
The UnixWare detection scheme could not identify the multi-
processor platform support module that should be installed
to enable the multi-processor capabilities of your system.
By pressing F5, you can choose to install any of the listed
modules or install the module from a Platform Support Module
(PSM) package.
"

PSM_REINSERT="
You elected to install a Multi-Processor Platform
Support Module Package.  Please insert the diskette
into the drive.
"

PSM_FLOPFOOTER="Press ENTER when ready."
PSM_EMSG1="
Cannot install the PSM diskette.  Try again.
"
PSM_EMSG2="
You have inserted the wrong PSM diskette.  Try again.
"
PSM_EMSG3="
This diskette does not seem to be a PSM diskette.  Try again.
"
PSM_REINSERTCols=70
PSM_REINSERTLines=15
# End of text used by osmp scripts.

CDROM_MSG="
 Checking the CD-ROM... 
"
CDROM_ERROR="
 The CD currently in the drive is not the
 $LONG_NAME Installation CD.  Please
 insert the $LONG_NAME Installation CD. 
"
CDROM_OPEN_ERROR="
 No CD has been detected in the drive.
 Make sure the CD is properly inserted
 in the drive and the power to the drive 
 is on.
"
CDROM_MOUNT_ERROR="
 The CD in the drive is unreadable.  Either 
 the CD is damaged, or the CD-ROM drive
 is not working correctly, or the CD is not
 the $LONG_NAME Installation CD.

 Please make sure the $LONG_NAME
 Installation CD is in the CD-ROM drive.
"

TAPE_MSG="
 Checking the tape... 
"
TAPE_ERROR="
 The tape currently in the drive is not the
 $LONG_NAME Installation tape. Please 
 insert the $LONG_NAME Installation tape. 
"
TAPE_OPEN_ERROR="
 No tape has been detected in the tape drive.
 Make sure the tape is properly inserted in the drive, 
 the latch (if any) is engaged, and the power to the
 tape drive is on.
"
TAPE_READ_ERROR="
 The tape in the tape drive is unreadable.
 Make sure the tape is properly inserted in the drive, 
 the latch (if any) is engaged, and the power to the
 tape drive is on.
"

DEP_FAIL="You have selected the \$PKG package,
however it depends on the following package(s)
which you have not selected to install.

\$DEP1
\$DEP2
\$DEP3
\$DEP4

Either select all required packages,
or deselect the \$PKG pkg.

Press ENTER to return to the package selection screen"
DEP_FAIL1="You have selected the \$PKG package,
however it depends on the following package
which you have not selected to install.

\$DEP1

Either select this package, or deselect
the \$PKG package

Press ENTER to return to the package selection screen"

# For use in "dcuprompt" script
DCUprompt="
 You now have the option of entering the UnixWare Device Configuration
 Utility (DCU).  The DCU is an advanced utility that allows viewing and 
 changing the configuration of the UnixWare system device drivers, as
 well as device drivers on any Host Bus Adapter (HBA) diskette.

 CAUTION:  You must be familiar with hardware configuration to use
           the DCU.  UnixWare will correctly identify and configure 
           most computers without your having to enter the DCU.
"

DCU_CHOOSE="$GENERIC_CONTINUE_CHOICE
Enter The DCU (See CAUTION Above)"
HBAwait="

Please wait while the HBA 
hardware modules are reloaded. 

"

OBSPKG_CHOOSE="Remove old obsolete packages
Cancel installation"

OBSPKG_EXPLAIN="The currently installed UnixWare system contains
packages which are obsolete and will be removed as
a part of the upgrade installation procedure.

If you do not want to have these packages removed, 
you must cancel the installation process at this time.
"

OBSPKG_FOOTER="Choose package removal or not, then press ENTER."
OBSPKG_ENTRY="Obsolete package removal"
PKG_MSG="Examining installed packages"
UNKREL_EXPLAIN="
 The current active UNIX partition does not contain
 a UNIX version that UnixWare ${VERSION} can install over
 nondestructively.  Choosing \"Destructive installation\"
 enables you to modify your disk partitioning and set 
 your active partition.  All data on the active partition
 will be erased before UnixWare ${VERSION} is installed.

 If you do not want to perform a destructive installation,
 you may cancel the installation immediately.
"
UNKREL_CHOOSE="Destructive installation
Cancel installation"
UNKREL_FOOTER="$GENERIC_FOOTER."
UNKREL_ENTRY="UNIX Partition Contents Unknown"
NOSPACE_EXPLAIN="
 The current active UNIX partition does not have enough free
 space for a nondestructive $LONG_NAME installation.

 You can choose to perform a destructive installation or you 
 can cancel the installation, reboot your existing UnixWare
 system, and remove some files.  To perform a nondestructive
 installation you must have \$FS_LACKS MB more free space in the
 \$FS_BIG.
"
NOSPACE_ENTRY="Insufficient space for non-destructive install"
FLOP2_PROMPT="
 Remove the diskette from the drive 
  and insert the diskette labeled
    \"Install Diskette 2 of 2.\"

      Press ENTER to continue.
"
FLOP2_ERR="
 An error occurred while reading the diskette.  Possible reasons for
 the error are
         - no diskette was inserted
         - an incorrect or damaged diskette was inserted
         - a diskette was inserted incorrectly
         - the CMOS setting for diskette drive A is incorrect

 Replace the diskette currently in the drive with the diskette labeled
 \"Install Diskette 2 of 2\" and then press ENTER to continue.  If this
 message appears again, use the System CMOS Setup program (described in 
 documentation that came with your computer) to check the setting for
 diskette drive A.  If the setting is wrong, correct it and restart the
 installation.  If the setting is correct, call your customer service
 representative to get a replacement \"Install Diskette 2 of 2.\"
"
FLOP2_READ="
 Reading the diskette... 
"

# This screen appears (text & choose box) if a destructive install will occur
DISK_INFO=" You may install only UnixWare ${VERSION} on your system or you may set aside
 disk space for other operating systems.  If you plan to or already 
 support more than one operating system, press ENTER.
 
 If you have a second disk, you will be able to configure that disk later 
 by selecting \"${HARD_DISK_ENTRY2}\" from the ${MAIN_TITLE}.
 
 CAUTION: ALL DATA IN THE ACTIVE UNIX PARTITION WILL BE ERASED when you
 select \"${SAVE_EXIT2}\" from the ${MAIN_TITLE}.
 If you have software installed on your system and have not done
 a backup, select \"$CANCEL2,\" reboot,
 and backup your system."

BADDISK_INFO=" Incorrect disk partitioning information has been detected 
 on hard disk drive:\$disk.  This can automatically be corrected by 
 allocating the entire disk for the UnixWare system installation.  
 Otherwise, system installation must be aborted.  

 For further information, see the section on hardware 
 troubleshooting in the Installation Handbook."
BADDISK_CHOOSE="Use the ENTIRE DISK for UnixWare ${VERSION} (Erases ALL Partitions)
$CANCEL2"
FAILED_DISK=" Incorrect disk partitioning information has been detected 
 on hard disk drive:\$disk.  The system installation must be aborted.  

 For further information, see the section on hardware 
 troubleshooting in the Installation Handbook."

FOOTER_FAILED_DISK="ENTER=$CANCEL2"

PARTS_CHOOSE_TITLE="Destructive Installation"

DISK_CHOOSE="Display a Screen to View/Change Current Disk Configuration
Use the ENTIRE DISK for UnixWare ${VERSION} (Erases ALL Partitions)
$CANCEL2"
 
# This text (DISK_EXPLAIN) appears along with the Disk 1 Partition form if
# the user chooses the second option 
 
DISK_EXPLAIN=" This screen enables you to change your disk configuration and set aside
 disk space for other operating systems.  Later, if you want to change
 this configuration or configure a second disk, if it exists, select 
 \"${HARD_DISK_ENTRY2}\" from the ${MAIN_TITLE}.

 No permanent changes will be made to your disk until you select
 \"${SAVE_EXIT2}\" from the ${MAIN_TITLE}.  At that
 time, ALL DATA IN THE ACTIVE UNIX PARTITION AND ANY PARTITIONS THAT WERE 
 CHANGED IN SIZE OR TYPE WILL BE ERASED.  Press F1 for more information."

# PKG_INFO text always appears before the Install Menu
PKG_INFO=" From the ${MAIN_TITLE} that follows, you may review and change your
 installation settings and install UnixWare ${VERSION}.

 Selecting \"${PKGENTRY2}\" displays the UnixWare ${VERSION} 
 software packages. A default set of packages has been selected for you
 but this may not be appropriate for all systems.

   - If you have a multiprocessor computer, you should select the
     \"$osmp_name\" package.
   - If you want to access online documentation, you should select the 
     \"${LONG_NAME} Documentation\" and \"$dynatext_name\" 
     packages.
   - If you do not need NetWare and/or Internet networking facilities,
     you should deselect those packages.

 Packages you do not install now may be installed later.  Refer to 
 the chapter on installing applications in the System Owner Handbook."

#
#	The following strings are for the Additional Platform Utilities package
#
Platform_Title="Additional Platform Utilities Selection"
Compaq_Title="Compaq Platform Configuration"
Choice_Compaq="Compaq"
Msg_Compaq="Install Additional Platform Utilities for Compaq platforms."
#
Choice_Tricord="Tricord"
Msg_Tricord="Install Additional Platform Utilities for Tricord platforms."
#
Choice_Ast="AST Manhattan"
Msg_Ast="Install Front Panel Support for AST Manhattan platforms."
#
Choice_None="None of the above"
Msg_None="Do not install any Additional Platform Utilities."
KEYBOARD_ERR="
  You did not select the \"US (ASCII)\" keyboard.
  Support for your selected keyboard is in the 
  \"$ls_name\" package.

  You must either select the \"$ls_name\"
  Package by choosing \"$PKGENTRY2,\" 
  or reselect the \"US (ASCII)\" keyboard using the
  \"$INTL_ENTRY2\" menu.

  Press ENTER to continue.
"
SPACE_ERR="
 The packages selected for installation will not
 fit in the file systems which are currently
 configured.

 Either deselect some packages by choosing
 \\\"$PKGENTRY2,\\\" or
 increase the size of the \$FS_BIG
 by at least \$FS_LACKS Megabytes (MB) using the
 \\\"$HARD_DISK_ENTRY2 --> $FSCONF_ENTRY\\\" 
 menu.

 Press ENTER to continue.
"

#Error messages for faultvt
CONTROL_D="
Hold down the <CTRL> key and press the D key to end installation."
FS_LOAD_FAILED="
Fatal Error:  A failure occurred while trying to load a system software driver.

Possible reasons for the failure are

  - the tape or compact disc is damaged
  - the tape drive or CD-ROM drive or network board is not working correctly
  - the network install server sent bad data

$HANDBOOK
$CONTROL_D
"
GenericFatalErr="
A fatal error has been detected on your computer system and
installation cannot continue.  For more information, examine
the /tmp/stderr file and the *.log and *.err files (if any)
under /mnt/tmp.

$HANDBOOK
$CONTROL_D
"
IDBUILD_FAILED="
Fatal Error:  A failure occurred while building the UNIX System kernel.
(The kernel is the program that forms the base of UnixWare.)  Errors
have been written to the file /tmp/kernel.build.

If you know how to correct the problem, do so and then type \"exit\".
The kernel build will then be retried automatically.

$HANDBOOK
"
INSTerr="
Your system installation has been terminated because a fatal error has
occurred while reading your installation medium (compact disc, network,
tape, etc.)

At this point the problem must be corrected before the installation can
be completed.  Please check for hardware or network problems and restart
installation.

$HANDBOOK
$CONTROL_D
"
PDI_FAILED="
Fatal Error: Failed to set up hardware drivers.

Possible reasons for the error are

      - one of the Host Bus Adapter diskettes you used is damaged or invalid
      - your diskette drive is not working correctly
      - the Install diskette is damaged
      - a severe error occurred while installing UnixWare onto your hard disk

Please call your customer service representative to get
replacement Host Bus Adapter and Install diskettes.

$HANDBOOK
$CONTROL_D
"
PKGerr="
Your system installation has been terminated because a fatal
error has occurred while installing your selected software packages.
This software error may, however, have resulted from system failures.

At this point the error must be corrected before the installation
can be completed.

$HANDBOOK
$CONTROL_D
"
#End of Error messages for faultvt

LICENSE_FLOP_PROMPT="
 Please insert the Program License Diskette 

               into Drive A:

          Press ENTER when ready.
"
KEY_TITLE="Enter the Activation Key"
SERIAL_PROMPT2="Serial Number:"
KEY_PROMPT="Activation Key:"
AGAIN_KEY="Press ENTER to try again."
BAD_KEY="
             Invalid Activation Key!

 The installation of Novell UnixWare from Compaq 
 cannot continue without a valid Activation Key.
"
KEY_FOOTER="F1=Help, F9=Cancel Installation, F10=Apply."
KEY_DISPLAY="
 Please type the Activation Key for the 
 Novell UnixWare $LONG_NAME.
 The Activation Key is supplied by your
 Compaq software provider.
"
BAD_KEY_IN_IFILE="
 The Activation Key you entered earlier for the Novell 
 UnixWare $LONG_NAME is not valid.  You will 
 now be prompted to enter the Activation Key.
"
DO_SETUP="
 Setting up UnixWare... 
"
FLOPPY_NOT_EMPTY="
 Please remove the diskette 
   from Diskette Drive A.
"
CD_NOT_EMPTY="
 Please remove the Compact Disc 
     from the CD-ROM drive.
"
RETENSION_WAIT="
        Retensioning the tape.
 This will take about three minutes. 
"
COLOR_PROMPT="

                Monitor Type Selection

  UnixWare was not able to determine whether your computer 
  is equipped with a color or non-color (monochrome) monitor.  

  To ensure that you can read all the screens during installation, 
  UnixWare must know which type of monitor you have.

  On a color monitor this screen will show white text on a blue
  background.  Otherwise this should be considered a non-color
  monitor.  What type of monitor is attached to your computer?

  Your choices are:

  1. Color monitor.
  2. Non-color monitor.

  Please type \"1\" or \"2\" followed by \"ENTER\": "

Continued_String="(Page Up/Page Down for more)"
PageDown_String="(Page Down for more)"
PageUp_String="(Page Up for more)"
INSTALL_MORE_BEGIN="
   Please wait while the additional
 products you selected are installed. 
"
INSTALL_MORE_MIDDLE="
Installing the"
INSTALL_MORE_END="
 Installation of additional 
   products is complete.
"
ODM_UP_EXPLAIN="
  The UNIX system currently installed on your disk has the Veritas
  Online Data Manager (ODM) extensions installed.  To be able to do an
  upgrade installation you will need the \"ODM Upgrade Installation Utilities\"
  disk provided with the ODM package for $LONG_NAME, $VERSION.

  If you do not have the ODM upgrade floppy, you cannot perform an
  upgrade installation; you can either continue with a destructive 
  installation, or you can quit the installation process completely.
"
ODM_UP_CHOOSE="Load ODM Upgrade Utilities Floppy
Continue With Destructive Installation
Cancel Installation and Reboot System"
ODM_WAIT="


  Loading ODM Upgrade Disk  

	Please Wait


"
ODMINST_INSERT_AGAIN="    Either you have not inserted a
  diskette or the diskette you have
     inserted is not the ODM Upgrade
         Utilities diskette.

"

ODMINST_INSERT_FLOPPY="
  Make sure the ODM Upgrade Utilities

      diskette is in the diskette 

       drive and press ENTER. 
"

ODMINST_REMOVE_FLOPPY="

  Please remove the ODM Upgrade Utilities

      diskette from the diskette drive 

       and press ENTER to continue 

"
ODM_MEDIA_CHOOSE="$INETINST_CDROM_PROMPT
$INETINST_DISKETTE_PROMPT"
ODM_PROMPT="

    You now have to install the Veritas

       Online Data Manager software.


 Select the media type below and hit ENTER 

"
#faultvt error messages
FAULTVT_INTERN_ERR1="Internal Error: Serial number is too long."
FAULTVT_INTERN_ERR2="Internal Error in cpq_load:\n Cannot find "
FAULTVT_INTERN_ERR3="Internal Error: Bad option"
INV_KEY="Internal Error -- validate_key gave bad result. "
