Installing Works for Windows on the OmniBook
  
PSS ID Number: Q101663
Article last modified on 02-18-1998
 
3.10
 
WINDOWS
 

======================================================================
3.10
WINDOWS
kbhw kb3rdparty kberrmsg kbprb
 
------------------------------------------------------------
The information in this article applies to:
 
 - Microsoft Windows operating system version 3.1
 - Microsoft MS-DOS operating system version 5.0
 - Microsoft Works for Windows, versions 2.0 and 2.0a
------------------------------------------------------------
 
SYMPTOMS
========
 
If you try to install version 2.0 or 2.0a of Microsoft Works for
Windows on the Hewlett-Packard (HP) OmniBook 300, the Microsoft Works
setup program fails. The following error message is displayed:
 
   Unable to write to drive D:
 
CAUSE
=====
 
The setup program for Microsoft Works for Windows refers to the
WIN.INI file to locate the directory and path of files to be updated
and modified. Some WIN.INI settings point to the read-only memory
(ROM) drive on the HP OmniBook 300. The Works for Windows setup
program fails because it is unable to update or modify files on the
ROM drive.
 
WORKAROUND
==========
 
To install Works for Windows on the HP OmniBook 300, do the following:
 
1. Copy all the filter (.FLT), converter (.CNV), and spelling checker
   (.LEX) files from the ROM drive (usually drive D) to a RAM drive
   (usually drive C) in the same directory tree.
 
2. Modify the WIN.INI file to reflect the new location for all these
   files. To do this, use an editor that has the ability to search on
   strings (such as SYSEDIT). Search for each of the extensions listed in
   step 1 and update the path on that line.
 
3. Save the changes.
 
4. Quit and then restart Windows.
 
5. Start the Microsoft Works for Windows setup program.
 
MORE INFORMATION
================
 
Microsoft has modified each product included with the OmniBook 300 to
operate on Flash ROM; these are not full retail releases of the
Microsoft products. In addition to the Flash ROM releases of these
Microsoft products, each OmniBook 300 owner is licensed to use the
full releases of the included products.
 
Technical Support for HP OmniBook is available 5:00 A.M. to 5:00 P.M.
Pacific time, Monday through Friday at (503) 757-2004. Hewlett-Packard
also has a fax number, (503) 760-5488, and an automated support
number, (800) 443-1254.
 
KBCategory: kbhw kb3rdparty kberrmsg kbprb
KBSubcategory: win31 msdos
Additional reference words: 3.10 omni book hp winworks installation
======================================================================
Keywords          : msdos win31 kb3rdparty kberrmsg kbhw kbprb
Version           : 3.10
Platform          : WINDOWS
=============================================================================
Copyright Microsoft Corporation 1998.