Project: Can't Open .MPP File
  
PSS ID Number: Q108344
Article last modified on 11-16-1994
 
3.00 3.00a
 
WINDOWS
 

-------------------------------------------------------
The information in this article applies to:
 
 - Microsoft Project for Windows, versions 3.0, 3.0a
-------------------------------------------------------
 
SYMPTOMS
========
 
In Microsoft Project, when you attempt to open an .MPP file, one of the
following problems may occur:
 
 - The file is not opened and the filename "Project1" remains displayed on
   the screen.
 
   -or-
 
 - When you start Microsoft Project, full menus are not displayed, and the
   default filename (Project1) is not displayed.
 
CAUSE
=====
 
This problem may occur if you are running Microsoft Project with the DEC
Terminal Emulation and you are using a KEYBRD.EXE or DECKYBD.EXE keyboard
driver.
 
RESOLUTION
==========
 
To resolve this problem, remove or remark out (type REM at the beginning of
the line) the lines in the AUTOEXEC.BAT file that contain KEYBRD.EXE or
DECKYBD.EXE.
 
NOTE: In some cases, there may be an accompanying DECKYBD.SYS driver listed
in the CONFIG.SYS file. If this driver exists, you must also remove or
remark the line that refers to this driver.
 
KBCategory: kbusage
KBSubcategory:
 
Additional reference words: 3.00 3.00a
=============================================================================
Copyright Microsoft Corporation 1994.
