Support for the Canon BJ-200 and BJ-200e
  
PSS ID Number: Q119162
Article last modified on 10-21-1998
 
2.x 3.00
 
MS-DOS
 

======================================================================
2.x 3.00
MS-DOS
kbprint
 
-------------------------------------------------------------------
The information in this article applies to:
 
 - Microsoft Works for MS-DOS, versions 2.x and 3.0
-------------------------------------------------------------------
 
SUMMARY
=======
 
Microsoft Works for MS-DOS does not directly support the Canon BJ-200
and Canon BJ-200e printers. However, Canon offers printer drivers for
these printers for use with Works for MS-DOS versions 2.0 and 3.0.
 
To obtain these drivers, call Canon's printer technical support number
at (800) 423-2366. The drivers for these printers can also be obtained by
using either of the following electronic services:
 
    CompuServe: Go Canon
    Canon's BBS: (714) 438-3325
                 8 data bits, 1 stop bit, no parity
                 300-14400 BPS
 
MORE INFORMATION
================
 
These drivers are designed to work with the printers set to Epson LQ
emulation mode (DIP switch 12 set to the "ON" position).
 
NOTE: The above-mentioned services may show these as being
available only for Works version 2.0 for MS-DOS, but according to Canon
technical support, these drivers should also work properly with Works
version 3.0 for MS-DOS.
 
Microsoft has not tested these drivers and therefore cannot guarantee
proper printing results using them.
 
KBCategory: kbprint
KBSubcategory: dworkskb
 
Additional reference words: kbhowto Canon BJ 200 200e BJ200 BJ200e
 
======================================================================
Version           : 2.x 3.00
Platform          : MS-DOS
=============================================================================
Copyright Microsoft Corporation 1998.