Automap: Printed Map Does Not Fill Entire Page
  
PSS ID Number: Q132074
Article last modified on 05-03-1999
 
WINDOWS:1.0,1.01,1.06,1.1,3.0,3.02,3.03,3.04,3.05,4.0
 
WINDOWS
 

======================================================================
WINDOWS
kbusage kbprint kbsetup kbgraphic kbprb kbfaq
 
-------------------------------------------------------------------------------
The information in this article applies to:
 
 - Microsoft Automap Road Atlas for Windows, versions 1.06, 1.1, 3.0, 3.02, 3.03, 3.04, 3.05, 4.0 
 - Microsoft Automap Pro for Windows, versions 1.03, 1.06, 1.08, and 1.09 
 - Microsoft Automap Streets for Windows, versions 1.0, 1.01 
-------------------------------------------------------------------------------
 
SYMPTOMS
========
 
When you print a map from one of the Automap products listed at the top of this
article, the output may not fill the entire page.
 
CAUSE
=====
 
By default, Automap does not print a full page. That option must be selected.
 
RESOLUTION
==========
 
To change Automap settings so an entire page is used during printing, do the
following:
 
1. On Automap File menu, click Print.
 
2. In the Print Map dialog box, click Options.
 
3. Make sure the Enlarge to Fit Paper check box is checked.
 
4. Click OK, and then click Print.
 
Additional query words: reference minimal shorted partial incomplete small \* 95Sweep
 
======================================================================
Keywords          :  kbfaq
Version           : WINDOWS:1.0,1.01,1.06,1.1,3.0,3.02,3.03,3.04,3.05,4.0
Platform          : WINDOWS
Issue type        : kbhowto
=============================================================================
Copyright Microsoft Corporation 1999.