Automap: Labels Print Double with Hppcl5e.drv Printer Driver
  
PSS ID Number: Q145900
Article last modified on 06-29-1998
 
4.00
 
WINDOWS
 

======================================================================
-------------------------------------------------------------------
The information in this article applies to:
 
 - Microsoft Automap Road Atlas for Windows, version 4.0
 - Microsoft Automap Streets, version 4.0
-------------------------------------------------------------------
 
SYMPTOMS
========
 
When you print from Automap Road Atlas or Automap Streets, version
4.0, to a Hewlett-Packard (HP) LaserJet printer using the Hppcl5e.drv
printer driver installed, map labels print double.
 
RESOLUTION
==========
 
Change the printer driver Graphics Mode setting to Raster. Use the
instructions below for your version of Windows
 
Changing the Graphics Mode in Windows 95/98
-------------------------------------------
 
1. Click Start, point to Settings, and then click Printers.
 
2. Right-click the printer you are using, and then click Properties.
 
3. Click the Graphics tab.
 
4. Change the Graphics Mode from Vector to Raster.
 
   NOTE: This takes less memory, and is especially useful if you
   receive an "Error 21" error message on the printer.
 
5. Click OK, close the window, and then reprint your map.
 
Changing the Graphics Mode in Windows 3.x
-----------------------------------------
 
1. Open the Control Panel, usually located in the Main program group.
 
2. Double-click the Printers icon.
 
3. In the Installed Printers dialog box, click the HP LaserJet Series
   4 printer one time.
 
4. Click Setup.
 
5. Click Options.
 
6. Click the down arrow to the right of Graphics Mode. Select Raster.
 
7. Click OK. Click OK again. Close the Printers dialog window.
 
8. Close the Control Panel.
 
9. Print your map again.
 
MORE INFORMATION
================
 
Section 9 of the Automap Streets 4.0 Read_me.wri file contains the
following information:
 
9. Printing in Automap Streets
 
   In general, it is recommended that you select Enhanced Drawing on
   the Drawing tab in the Map Display Options dialog box for high-
   quality printed maps.
 
   Map printing can produce extremely large files. The size and
   complexity of these graphics files can cause very slow printing.
   Files might exceed the capabilities of your printer, causing
   printer errors such as memory overflow or print overrun. The best
   fix is to increase your printer's memory, if possible.
 
   Other suggestions follow:
 
    - Turn off unnecessary Places, Areas, or Map options in the Map
      Display Options dialog box.
 
    - Use "Quick drawing" on the Drawing tab in the Map Display Options
      dialog box.
 
    - Turn off "Enlarge to Fit Paper" in the Printing Options dialog
      box.
 
   Automap Streets will not print using the HP7550 plotter driver.
 
   If you have an HP Laser Jet 4M Plus, please print in PostScript
   mode. If you are using the HPPCL5E.DRV driver, it is suggested that
   you set your Graphics mode to Raster. This can be modified by
   clicking on Setup, then Options in the Print dialog.
 
   If you encounter printing problems in the Windows NT environment,
   see the previous section.
 
The third-party products discussed here are manufactured by a vendor
independent of Microsoft; we make no warranty, implied or otherwise,
regarding these products' performance or reliability.
 
Additional query words: 4.00 auto auto-map automap reference double
click
======================================================================
Version           : 4.00
Platform          : WINDOWS
=============================================================================
Copyright Microsoft Corporation 1998.