Mac Wkst: Explanation of Give Up Dialog Box

MORE INFORMATION

The workstation makes requests from the server. If it does not get a reply after two retries, it displays the Give Up dialog box and at the same time sends out a network lookup request to see if it can find the server.

If the server is found, the Give Up dialog box is dismissed (canceled) and the cycle starts again with the workstation sending the original request again.

If the server is not found, the Give Up dialog box is not dismissed and in approximately five seconds, the workstation sends out another network lookup request to see if it can find the server. The workstation continues looking for the server in this manner until it finds the server or until the user dismisses the Give Up dialog box.

Note that Microsoft Mail uses only two AppleTalk protocols: AppleTalk Transaction Protocol and Name Binding Protocol.

There are many reasons why the Mail server may not respond to the workstation:

1. The network is not properly terminated. Mail 3.1 is more sensitive to this problem than previous versions of Mail.
2. The server is temporarily busy responding to other workstation requests. Mail 3.1 has the capacity to respond to eight user requests at one time while earlier versions of Mail can only handle four user requests at a time.
3. The server is no longer up and running. Verify this by looking in the Chooser.
4. For multi-zone AppleTalk networks, a router or bridge may be down.
5. There is a problem on the network such that network packets are lost, delayed, or corrupted. When signing onto Mail servers that are physically a long distance away, Give Ups are more likely.

In general, it is best to use the most current version of Microsoft Mail. With each new version of Mail, problems with earlier version(s) are fixed. Some of these fixes correct problems that can cause Give Up problems.