Windows Reboots at Startup on the Texas Instruments SP1000
Article ID: 100608
Article Last Modified on 10/10/2003
APPLIES TO
- Microsoft Windows 3.1 Standard Edition
- Microsoft Windows 3.11 Standard Edition
This article was previously published under Q100608
SYMPTOMS
When you start Windows on a Texas Instruments (TI) SP1000, your
machine may reboot if the statement DOS=HIGH or DOS=HIGH,UMB is in the
CONFIG.SYS file.
RESOLUTION
To work around this problem remove any DOS= commands from your CONFIG.SYS
file.
The TI SP1000 may require a machine (/M) switch on the HIMEM.SYS command
line in the CONFIG.SYS file. Machine number 8 or 12 should correct this
problem. Texas Instruments Technical Support recommends that you try the
machine number 12 switch first.
The SP1000 is manufactured by Texas Instruments, a vendor independent of
Microsoft; we make no warranty, implied or otherwise, regarding this
product's performance or reliability.
For more information, call Texas Instruments Technical Support.
Additional query words: 3.10
Keywords: KB100608