Backup Err Msg: Cannot Read Volume Information from Diskette
Article ID: 101885
Article Last Modified on 11/19/1999
APPLIES TO
- Microsoft MS-DOS 6.0 Standard Edition
- Microsoft MS-DOS 6.2 Standard Edition
- Microsoft MS-DOS 6.22 Standard Edition
This article was previously published under Q101885
SYMPTOMS
Microsoft Backup for MS-DOS (MSBACKUP.EXE) fails to restore files to a
different machine than the one you originally used for backup. Attempting
to restore using MSBACKUP.EXE may result in one of the following error
messages:
- Cannot read volume information from diskette.
-or-
- Cannot determine diskette type.
NOTE: These errors can also occur if you run Microsoft Backup from a third-
party menu program. To work around this problem, exit Microsoft Backup and
the menu program and then run Microsoft Backup from an MS-DOS command
prompt.
WORKAROUND
To work around this problem, rebuild the catalog file before you proceed
with the restore operation. The steps to rebuild a catalog file from floppy
disks are as follows:
- Run MSBACKUP.EXE and choose the Restore button.
- From the Catalog menu, choose Rebuild.
- Select the correct drive letter from which to rebuild and then choose
OK.
- After rebuilding, choose the Load button to load the new file, then
continue with Restore.
Additional query words: 6.00 hang hangs errmsg 6.20
Keywords: KB101885