Knowledge Base

Setup May Fail on Future Domain SCSI Controller

Article ID: 102039

Article Last Modified on 11/1/2006

APPLIES TO

This article was previously published under Q102039

SYMPTOMS

You are using a 16-bit Future Domain SCSI adapter and Windows NT Setup stops responding (hangs) when the graphical portion of Setup starts.

CAUSE

Under MS-DOS you can configure the 16-bit Future Domain SCSI adapters so they do not use an interrupt for the adapter. This configuration is not supported by Windows NT.

RESOLUTION

Configure the 16-bit Future Domain SCSI on an interrupt. This can be changed using a jumper setting on the adapter card.

To contact Future Domain, please call (408) 934-7274.

The Future Domain SCSI products included here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

Additional query words: prodnt fail fails 1660 board

Keywords: kbhardware KB102039


Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.