SNMP Service Entries

SUMMARY

The article contains REGISTRY entries for the SNMP dialog boxes. There are no subgroups.

SNMP SERVICE

The following values store the settings chosen in the SNMP dialog boxes when you configure SNMP. You should always use the Network icon in Control Panel to configure SNMP.

These entries are in the following Registry path:

   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Snmp\Parameters

Authtrap   REG_SZ   Booleon
---------------------------
Default:  On
				

Indicates whether the SNMP service sends a trap whenever it receives a request that does not match any community name or host filter in its lists. If this value is off (0), the SNMP service does not send a trap when this occurs.

CommunityNames   REG_SZ   Names
-------------------------------
Default:  public
				

Specifies one or more community names defining groups of hosts from which the SNMP service will accept requests.

TrapDestinations   REG_SZ   Names
---------------------------------
Default:  -
				

Specifies one or more host names or IP adddresses defining hosts to which the SNMP service sends traps.

TrapCommunity   REG_SZ   Names
------------------------------
Default:  Public
				

Specifies the name designating an Internet community of hosts to which the SNMP service sends traps.