Article ID: 102996
Article Last Modified on 11/1/2006
- AppleTalk and MacFile services
- AppleTalk Entries for SFM
- AppleTalk Parameter Entries
- Adapter Card Entries for AppleTalk
- AppleTalk Winsock Entries
- MacFile Entries for SFM
- MacFile Parameters Entries
- Type_Creators Entries for MacFile
- Extensions Entries for MacFile
- Icons Entries for MacFile
- MacSrv (AFP Server) Services Entries
- MacPrint Service Entries
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Alerter\Parameters
Specifies the list of users to whom administrator alerts are sent. This value can be set using the Server Manager. Default: NULL
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AppleTalk
DependOnGroup=NDIS DependOnService=Lance DisplayName=AppleTalk Transport ErrorControl=0x1 ImagePath=\SystemRoot\system32\drivers\sfmatalk.sys Start=0x2 Type=0x1
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AppleTalk \Parameters
NOTE: The above registry key is one path; it has been wrapped for readability.
Specifies the network on which the SFM service names are registered. If the AppleTalk protocol is not routing, only Macintosh workstations connected to this network can see the file and print services. During initial installation, the default port is set automatically to the first Ethernet adapter found, or to the first Token Ring adapter, or to a LocalTalk adapter (in that order). Default: the first adapter found.
Specifies the zone in which the SFM service is present. If this value is not set, SFM is present in the default zone for that network. There is no default.
Tells the AppleTalk protocol whether routing needs to be started on this computer. If routing is started, Macintosh workstations connected to any of the networks that this computer is on should be able to use the file and print servers for Macintosh.
IMPORTANT: This value is critical. Unless absolutely essential, do not set this value to 1.
Default: 0
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AppleTalk\Adapters \adapter_name
NOTE: The above registry key is one path; it has been wrapped for readability.
Specifies the maximum number of AppleTalk address-resolution protocol packets to be sent by the AppleTalk protocol. Default: 0xa
Tells the AppleTalk protocol whether to compute checksums in the DDP layer. If this entry is 1, the AppleTalk protocol uses sums in the DDP layer. Default: 0
Contains the default zone for this network if this adapter is seeding the network. If the adapter is seeding the network, the default zone is chosen when you configure SFM using the Network icon in Control Panel. There is no default.
Specifies the lower network number of the network range if this adapter is seeding the network. If the adapter is seeding the network, this number is set by using the Network icon in Control Panel to configure SFM. There is no default.
Specifies the upper network number of the network range for this network if this adapter is seeding the network. If the adapter is seeding the network, this number is set by using the Network icon in Control Panel to configure SFM. There is no default.
Specifies the name used to identify the AppleTalk protocol running on a particular adapter on a computer. There is no default.
Used by the AppleTalk protocol during startup. If this value is 0, this adapter is not seeding the network and the AppleTalk protocol ignores any seeding information for the adapter, if specified. If this value is 1, the AppleTalk protocol reads all seeding information and seeds the network, if valid. Default: 0.
This value is relevant only when the adapter is seeding the network. The network is seeded with this list of zones by the AppleTalk protocol. Changes can be made by using the Network icon in Control Panel to configure SFM. There is no default.
HelperDllName=C \winnt\system32\sfmwshat.dll Mapping= MaxSockAddrLength=0x8 MinSockAddrLength=0x6
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MacFile
DependOnGroup= DependOnService=AppleTalk LanManWorkStation NetLogon DisplayName=File Server for Macintosh ErrorControl=0x1 ImagePath=%SystemRoot%\system32\sfmsvc.exe ObjectName=LocalSystem Start=0x2 Type=0x20
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MacFile\Parameters
Specifies the message you want Macintosh users to see when they log on to the Windows NT Advanced Server network. There is no default.
Specifies the maximum number of user sessions that the file server for Macintosh can accommodate. Default: 0xff (255 in decimal)
Specifies the maximum amount of page memory that the file server for Macintosh uses. Performance of the MacFile service increases with an increase in this value. However, the value should not be set lower than 1000 KB. It is especially important that you are well acquainted with memory issues before changing this resource parameter. You cannot change this value from Server Manager. Default: 0x4e20 (20000 in decimal). PagedMemLimit is not a valid entry for Windows NT Server version 4.0 and Windows NT 4.0 ignores this setting if it sees it.
Specifies the maximum amount of RAM that is available to the file server for Macintosh. Increasing this value helps performance of the file server, but decreases performance of other system resources. Default: 0xfa0 (4000 in decimal)
Specifies the name of the server running SFM on a Windows NT Advanced Server network. Use the server's Windows NT Advanced Server name as the default if you need to add this entry. There is no default.
Specifies server options that are set in Server Manager. If needed for repair purposes, change bits 1 through 3; do not change any of the other bits. When on, bit 1 allows guest logons, bit 2 allows cleartext passwords, and bit 3 allows Macintosh users to save passwords on their workstations. The defaults are bit 1, 2, and 3 set to on.
Each entry specifies information about a Macintosh-accessible volume on the server on a Windows NT Advanced Server network. You should add Macintosh-accessible volumes using File Manager.
Value Meaning
----------------------
MaxUses Specifies the maximum number of simultaneous
workstations that can be connected to the file
server. The upper limit is unlimited. The
practical limits are based on the server
hardware and network media.
Properties Specifies security options. When bit 16 (the leftmost bit
in binary notation) is set to On, only guests can use
this volume. This is the default (1000000000000000 in
binary notation). When bit 1 (the right-most bit in
binary notation) is set to On, the volume is read-only.
For both the volume to be read-only and guests to use
this volume, the binary value would be 1000000000000001.
Password Contains the encrypted password. Do not change
this value. If a user forgets a password, you
can delete this entry, thus removing a password
requirement from the user's account. Then the
user can specify a new password at logon.
Path Specifies the path of the volume's root
directory. If a volume has been deleted,
the path may still be valid; consequently,
you should not delete this value. If volumes
are deleted using File Manager, you can
delete this value.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services \MacFile\Parameters\Type_Creators
NOTE: The above registry key is one path; it has been wrapped for readability.
## REG_MULTI_SZ Creator=Value Type=Value Comment=Value
1 = CREATOR=XCEL TYPE=XLC3 Comment=Excel Chart 10 = CREATOR=XCEL TYPE=XLM4 Comment=MS Excel 4.0 Macrosheet 11 = CREATOR=XCEL TYPE=XLW4 Comment=MS Excel 4.0 WorkSpace 12 = CREATOR=XCEL TYPE=XLA Comment=Excel 4.0 Add-in MacroFile 13 = CREATOR=XCEL TYPE=XLT Comment=Excel 4.0 Template File 14 = CREATOR=MSWD TYPE=WDBN Comment=MS Word 4.0 Document 15 = CREATOR=MSWD TYPE=TEXT Comment=MS Word 4.0 Document 16 = CREATOR=MSPJ TYPE=MPP Comment=MS Project 1.x 17 = CREATOR=MSPJ TYPE=MPX Comment=Project 1.x Xchange Format 18 = CREATOR=MSPJ TYPE=MPP Comment=MS Project 1.x 19 = CREATOR=MSPJ TYPE=MPC Comment=MS Project 1.x Calendars 2 = CREATOR=XCEL TYPE=XLS3 Comment=Excel Spreadsheet 20 = CREATOR=MSPJ TYPE=MPV Comment=MS Project 1.x Views 21 = CREATOR=MSPJ TYPE=MPW Comment=MS Project 1.x WorkSpaces 22 = CREATOR=ALD3 TYPE=ALB3 Comment=Mac Pagemaker Publication 23 = CREATOR=ALD3 TYPE=ALT3 Comment=Mac Pagemaker Template 24 = CREATOR=ALD3 TYPE=TIFF Comment=Mac Pagemkr Tiff Graphics 25 = CREATOR=MORE TYPE=TEXT Comment=Symantec More File 26 = CREATOR=FOX+ TYPE=F+DB Comment=FoxBase Plus 27 = CREATOR=ALD2 TYPE=PUBF Comment=Mac PageMaker 28 = CREATOR=ARTZ TYPE=EPSF Comment=Adobe Illustrator 29 = CREATOR=SIT! TYPE=SIT! Comment=Aladdin Stuffit 3 = CREATOR=XCEL TYPE=XLM3 Comment=Excel Macrosheet 30 = CREATOR=PPT2 TYPE=SLD2 Comment=MS Power Point 2.0 31 = CREATOR=PPT3 TYPE=SLD3 Comment=MS Power Point 3.0 32 = CREATOR=L123 TYPE=LWK3 Comment=Lotus 1-2-3 33 = CREATOR=LMAN TYPE=DEXE Comment=LMAN Executables 4 = CREATOR=XCEL TYPE=XLW3 Comment=Excel Workspace 5 = CREATOR=XCEL TYPE=XLA Comment=Excel Add-in MacroFile 6 = CREATOR=XCEL TYPE=SLM3 Comment=Excel Template File 7 = CREATOR=XCEL TYPE=TEXT Comment=MS Excel 3.0 8 = CREATOR=XCEL TYPE=XLC4 Comment=MS Excel 4.0 Chart 9 = CREATOR=XCEL TYPE=XLS4 Comment=MS Excel 4.0 Spreadsheet
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MacFile\Parameters\Extensions
BAT = ID=33 COM = ID=33 CSV = ID=10 DBF = ID=29 DIF = ID=11 DLL = ID=33 DOC = ID=14 EPS = ID=31 EXE = ID=33 GLY = ID=18 MPC = ID=21 MPP = ID=19 MPV = ID=22 MPW = ID=23 MPX = ID=20 PM3 = ID=25 PPT = ID=33 PT3 = ID=26 PUB = ID=30 RDY = ID=28 RTF = ID=16 SIT = ID=32 SLK = ID=7 STY = ID=17 SYS = ID=33 TEM = ID=27 TIF = ID=27 TPL = ID=27 TXT = WK1 = ID=9 WK3 = ID=35 WKS = ID=8 WRD = ID=15 XLA = ID=5 XLC = ID=1 XLM = ID=3 XLS = ID=2 XLT = ID=6 XLW = ID=4
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MacFile \Parameters\Icons
NOTE: The above registry key is one path; it has been wrapped for readability.
LMANDEXE REG_MULTI_SZ Default: CREATOR=LMAN TYPE=DEXE ICONTYPE=1 LENGTH=256 DATA=(code) LMANTEXT REG_MULTI_SZ Default: CREATOR=LMAN TYPE=TEXT ICONTYPE=1 LENGTH=256 DATA=(code) SRVRSRVR REG_MULTI_SZ Default: CREATOR=SRVR TYPE=SRVR ICONTYPE=0 LENGTH=256 DATA=(code)
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MacSrv
DependOnGroup=TDI DependOnService= DisplayName=AFP Kernel Driver ErrorControl=0x1 Group=Network ImagePath=\SystemRoot\system32\drivers\sfmsrv.sys Start=0x3 Type=0x2
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MacPrint
DependOnGroup= DependOnService=AppleTalk DisplayName=Print Server for Macintosh ErrorControl=0x1 ImagePath=%SystemRoot%\system32\sfmprint.exe ObjectName= Default: LocalSystem Start=0x2 Type=0x10
Additional query words: prodnt mac
Keywords: kbinterop KB102996