Using IBM LaserPrinter 4019 & 4029 (Non-PostScript) with NT
Article ID: 103041
Article Last Modified on 4/13/2004
APPLIES TO
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
This article was previously published under Q103041
SUMMARY
To use either the IBM LaserPrinter model 4019 non-PostScript or model
4029 non-PostScript printer with Windows NT, you must configure the
printer for Hewlett-Packard (HP) Series II emulation and install the
HP LaserJet Series II printer driver.
Microsoft does not provide Windows NT printer drivers for the
non-PostScript models of these printers.
To configure the IBM LaserPrinter 4019 and 4029 for HP Series II
emulation, hold down the Font button on the front panel of the printer
as you turn the printer on. The printer will remain in the HP Series
II emulation mode until you configure it otherwise.
MORE INFORMATION
Microsoft provided drivers for the Non-PostScript IBM LaserPrinters
for Windows 3.1 and Windows for Workgroups. These drivers were based
on GENDRV.DLL and have not been converted for Windows NT at this
time.
The LaserPrinter 4019 and 4029 are manufactured by IBM, a vendor
independent of Microsoft; we make no warranty, implied or otherwise,
regarding these products' performance or reliability.
Additional query words: wfw wfwg prodnt
Keywords: kbprint KB103041