Bindings List Blank when a Network Adapter is Selected
Article ID: 103100
Article Last Modified on 4/13/2004
APPLIES TO
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
This article was previously published under Q103100
SUMMARY
From Control Panel, in the Network Bindings option, when you select a
Network Interface Card (NIC) from the Show Bindings For drop down list
box, the Bindings list is empty.
This behavior is by design. The Bindings dialog box is designed to
show the bindings below the component selected in the Show Bindings
For drop down list box. Because an adapter has no bindings downward,
there is nothing to show. If you select the Driver for the adapter,
you will see a binding from the driver to the adapter.
Additional query words: prodnt nic
Keywords: kbnetwork KB103100