CVF Internal Errors: System Fails to Clean/Interactive Boot
Article ID: 103519
Article Last Modified on 11/22/1999
APPLIES TO
- Microsoft MS-DOS 6.2 Standard Edition
- Microsoft MS-DOS 6.22 Standard Edition
This article was previously published under Q103519
SUMMARY
This information applies to both Microsoft DoubleSpace and Microsoft
DriveSpace. For MS-DOS 6.22, use DRVSPACE in place of DBLSPACE for commands
and filenames.
SYMPTOMS
If your DBLSPACE.INI file contains a command to mount a compressed
volume file (CVF) that contains internal errors, DBLSPACE.BIN displays
the following message:
DoubleSpace found a problem on compressed drive <drive>.
To continue the startup process, press ENTER. Then, correct the
problem by typing SCANDISK <drive>: at the command prompt.
If you press either the Clean Boot (F5) or Interactive Boot (F8) keys,
your response is taken as a response to the above prompt. (The system
does not perform a clean start or an interactive start.)
RESOLUTION
To work around this problem, press F5 twice to clean boot the system
or F8 twice to boot the system interactively.
Additional query words: 6.20
Keywords: KB103519