Knowledge Base

X400: X400ADM Utility Memory Requirements

Article ID: 103803

Article Last Modified on 10/30/2006

APPLIES TO

This article was previously published under Q103803

SUMMARY

The version 3.2 Microsoft Mail Gateway to X.400 Administrator program (X400ADM.EXE) requires at least 400K of conventional memory on the machine that is used to run it.

To determine the largest executable program size that can be run, use the Microsoft MS-DOS MEM command.

For additional information about maximizing conventional memory, consult your MS-DOS and network operating system documentation.

MORE INFORMATION

One way to run the utility more efficiently is to move it to a local hard disk drive, and then start the program from that drive. The Gateway Administrator program must run on a machine with FAT partitions.

Create a directory on your local hard disk, and then copy these executables into that directory:

X400ADM.EXE
ADM2.EXE
X400CMAP.EXE
X400DMAP.EXE
PRINTCFG.EXE
X400ADM.HLP

These files should be located in the path you specify for the executables directory during installation of the gateway component.

Additional query words: 3.20

Keywords: KB103803


Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.