X400: Setting Up the Gateway as an EiconCard Redirector

MORE INFORMATION

To use this configuration:

1. On the EiconCard server, install the EiconCard and the OSI LAN Gateway DOS Gateway software.
2. On the Gateway computer, install the EiconCard and the OSI LAN Gateway DOS Workstation software.
3. On the EiconCard server, modify the AUTOEXEC.BAT file to set up the computer as an EiconCard server.
4. On the Gateway computer, modify the AUTOEXEC.BAT file to set up the computer as an EiconCard redirector.

Example 1

The following example shows parts of the AUTOEXEC.BAT files when the gateway computer is an EiconCard redirector. X25serv is the server name, mypassword is the server password, x25redir is the redirector name, and four workstation sessions are being supported on the redirector computer by the Eicon software.

On the server (the computer with the EiconCard): On the redirector (the gateway computer):

Example 2

This example shows the AUTOEXEC.BAT files needed for the gateway on a Novell NetWare network. Again, four workstation sessions are being supported on the redirector computer by the Eicon software. Microsoft MS-DOS version 5.0 is installed.

On the server (the computer with the EiconCard): On the redirector (the X.400 gateway computer):