DoubleSpace Maintenance Program Does Not Display All Drives
Article ID: 104535
Article Last Modified on 11/22/1999
APPLIES TO
- Microsoft MS-DOS 6.0 Standard Edition
- Microsoft MS-DOS 6.2 Standard Edition
- Microsoft MS-DOS 6.22 Standard Edition
This article was previously published under Q104535
SYMPTOMS
This information applies to both Microsoft DoubleSpace and Microsoft
DriveSpace. For MS-DOS 6.22, use DRVSPACE in place of DBLSPACE for commands
and filenames.
When you compress an existing drive or create a new compressed drive
using the DoubleSpace maintenance program, some of your drives may not
appear in the list of available drives.
CAUSE
The DoubleSpace maintenance program does not display drives that do
not have sufficient free space to be compressed.
RESOLUTION
To work around this problem, ensure the disk you want to compress has
enough free disk space. To determine how much space is required,
refer to the following table:
Disk Type Free Space Required
--------- -------------------
Non-Boot Disk (compressed from command line) 1.13 MB
Non-Boot Disk (compressed from 1.13 MB
DoubleSpace Manager)
Boot Disk (compressed from command line) 1.45 MB
Boot Disk (compressed from command line) 1.63 MB
Floppy Disk 1.10 MB
NOTE: MS-DOS 6.2 Help contains incorrect numbers for free space
required if you are attempting to compress a boot disk.
For more information, type
help dblspace /compress at the MS-DOS command prompt and then press ENTER.
Additional query words: 6.20 docerr
Keywords: KB104535