Knowledge Base

Cannot use UNC Pathname for Working Directory in Windows NT

Article ID: 105250

Article Last Modified on 11/1/2006

APPLIES TO

This article was previously published under Q105250

SYMPTOMS

In Windows NT, you cannot specify a UNC (universal naming convention) pathname for the working directory of an icon for a 16-bit application. If you set a UNC pathname as a working directory, you will not receive an error message indicating that the working directory is invalid, but the directory specified will not be the working directory.

WORKAROUND

To work around this limitation, use the NT 3.x File Manager or NT 4.0 Network Neighborhood icon to make a full connection to the desired share and specify that drive as the working directory.

MORE INFORMATION


Steps to Reproduce Problem

  1. Using NT 3.x File Manager or NT 4.0 Explorer, share a directory either on the local computer or a remote computer.
  2. In NT 3.x Program Manager, create an icon with the following properties:

    Command Line: WRITE.EXE Working Directory: \\computername\sharename

    - or -
  3. On the NT 4.0 desktop, create a shortcut with the following properties:

    Target: %WINDIR%\WINHELP.EXE Start in: \\computername\sharename
  4. Start the application using the new icon and choose Open from the File menu.
In the Directories list of the Open dialog box, you will not see the path to the working directory specified in the Program Item Properties using the UNC pathname, even though you did not receive any error messages.

Additional query words: prodnt 3.x 3.5x 16bit

Keywords: kbnetwork KB105250


Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.