Knowledge Base

PC Win: Running Windows Client from the Network

Article ID: 107444

Article Last Modified on 10/30/2006

APPLIES TO

This article was previously published under Q107444

SUMMARY

Microsoft provides a replacement for the SETUP.EXE and SETUP.INF files included in version 3.2a of Microsoft Mail for Windows.

The information below outlines procedures for users to run Mail for Windows from the network without storing Mail files on their local workstations.

For complete information about obtaining the SETUP.EXE and SETUP.INF files, see the "To download the updated file" section below.

The network administrator can use the outlined procedures to set up version 3.2a of Microsoft Mail so users can run Mail for Windows from the network without storing Mail files on their local workstations.

  • "Running Windows and Mail from the Network--Same Directory" explains how to set up Mail for Windows when users run both Microsoft Windows and version 3.2a of Mail for Windows from the same network directory.
  • "Running Windows and Mail from the Network--Different Directories" explains how to set up Mail for Windows when users run both Windows and Mail for Windows from different network directories.
  • "Running Windows Locally and Mail from the Network" explains how to set up Mail for Windows when users run Windows locally and run Mail for Windows from the network.
  • "Running Windows from the Network and Mail Locally" explains how to set up Mail for Windows when users run Windows from the network and run Mail for Windows locally.

    Notes:

    To use Advanced Security (MAIL.DAT) in a shared Windows environment, two files must be updated: the SETUP.EXE file (included in this update) and MSSFS.DLL version 3.2.0.4079 (included in MSSFS.EXE on the Microsoft Software Library (MSL)).

    Because the file I/O that normally occurs on the local workstation is being handled by the network, Mail's performance may decrease if you run Mail for Windows from the network.

MORE INFORMATION

To download the updated files

The following file is available for download from the Microsoft Download Center:

[GRAPHIC: Download]Download Setupd.exe now

For additional information about how to download Microsoft Support files, click the following article number to view the article in the Microsoft Knowledge Base:

119591 How to Obtain Microsoft Support Files from Online Services

Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help to prevent any unauthorized changes to the file.

After you download SETUPD.EXE to a clean directory, double-click it to extract the contents of the file. You should receive the following files:

SETUP.EXE (62880 bytes, dated 07-22-94, 8:13 P.M.)
SETUP.INF ( 6525 bytes, dated 11-23-94, 12:15 A.M.)
README.TXT

Running Windows and Mail from the Network--Same Directory

Definitions

Installation Steps

To set up the Mail 3.2a shared files

  1. Install Windows in a server directory (<WINSHARE>) and designate a drive letter for the directory. Set full rights for Supervisor, ReadOnly, and FileScan (for Novell networks) for all users.
  2. Install the Mail postoffice in the <MAILDATA> and <MAILEXE> directories as described on pages 6-10 in the Microsoft Mail 3.2 "Administrator's Guide." Designate drive letters for each directory.
  3. At the MS-DOS command prompt, type the following and press ENTER

    copy <drive>:\setup.* <destination>

    where <drive> is the drive and directory where you ran the self- extracting SETUPD.EXE file and <destination> is the drive and directory where your SETUP.EXE and SETUP.INF files currently reside. For example, if you ran the self-extracting file from the TEST directory on drive D, and the SETUP.EXE and SETUP.INF files are located in the MAILEXE directory on drive C, type the following command:

    copy d:\test\setup.* c:\mailexe

  4. At the MS-DOS command prompt, type the following and press ENTER

    copy <mailexe>\setup.inf <mailexe>\setupinf.old

    where <mailexe> is the complete path to the directory containing the Microsoft Mail for Windows SETUP.EXE program. For example, if SETUP.EXE is located in the MAILEXE directory on drive C, type the following command:

    copy c:\mailexe\setup.inf c:\mailexe\setupinf.old

  5. Using any text editor, edit the SETUP.INF file. In the [Setup] section, replace the following line

    1, setup.exe,,,, 1993-03-09, !DECOMPRESS,, OLDER, !READONLY,,,,,, 62608,,,, 3.2.0.4027,

    with:

    1, setup.exe,,,, 1994-01-11, !DECOMPRESS,, OLDER, !READONLY,,,,,, 62880,,,, 3.2.0.4076,

    Save the file and close the text editor.

    NOTE: For these changes to affect the entire network, each existing user must run Setup again.
  6. Log on to the network as Supervisor and run Windows from the <WINSHARE> directory. In Windows File Manager, go to the <MAILEXE> directory and start the Setup program by double-clicking the SETUP.EXE file. When the Setup program prompts you for the Microsoft Mail directory, type WINSHARE as the location. For example, if the network version of Windows is located in the WIN31 directory on drive X, type X:\WIN31. This will install all the Mail program files in the same directory as Windows.
To set up a user for Mail 3.2a

  1. Install Windows to <MYDIR> on the server using the following command:

    setup /n

  2. Run Windows from <MYDIR>. In Windows File Manager, go to the <MAILEXE> directory and start the Setup program by double-clicking the SETUP.EXE file. When the Setup program prompts you for the Microsoft Mail directory, type WINSHARE as the location. For example, if the network version of Windows is located in the WIN31 directory on drive X, type X:\WIN31. This will install Mail in the Windows shared directory on the server and create an MSMAIL directory in the <MYDIR> directory on the server containing the user's .INI files.

Running Windows and Mail from the Network--Different Directories

Definitions

Installation Steps

To set up the Mail 3.2a shared files

  1. Install Windows in a server directory (<WINSHARE>) and designate a drive letter for the directory. Set full rights for Supervisor, ReadOnly, and FileScan (for Novell networks) for all users.
  2. Install the Mail postoffice in the <MAILDATA> and <MAILEXE> directories as described on pages 6-10 in the Microsoft Mail "Administrator's Guide." Designate drive letters for each directory.
  3. At the MS-DOS command prompt, type the following and press ENTER

    copy <drive>:\setup.* <destination>

    where <drive> is the drive and directory where you ran the self- extracting SETUPD.EXE file and <destination> is the drive and directory where your SETUP.EXE and SETUP.INF files currently reside. For example, if you ran the self-extracting file from the TEST directory on drive D, and the SETUP.EXE and SETUP.INF files are located in the MAILEXE directory on drive C, type the following command:

    copy d:\test\setup.* c:\mailexe

  4. At the MS-DOS command prompt, type the following and press ENTER

    copy <mailexe>\setup.inf <mailexe>\setupinf.old

    where <mailexe> is the complete path to the directory containing the Microsoft Mail for Windows SETUP.EXE program. For example, if SETUP.EXE is located in the MAILEXE directory on drive C, type the following command:

    copy c:\mailexe\setup.inf c:\mailexe\setupinf.old

  5. Using any text editor, edit the SETUP.INF file. In the [Setup] section, replace the following line

    1, setup.exe,,,, 1993-03-09, !DECOMPRESS,, OLDER, !READONLY,,,,,, 62608,,,, 3.2.0.4027,

    with:

    1, setup.exe,,,, 1994-07-22, !DECOMPRESS,, OLDER, !READONLY,,,,,, 62880,,,, 3.2.0.4074,

    In the [MsMail Prog] and the [Msmail System] sections, change the word Older to Never.

    Save the file and close the text editor.

    NOTE: For these changes to affect the entire network, each existing user must run Setup again.
  6. Log on to the network as Supervisor and run Windows from the <WINSHARE> directory. In Windows File Manager, go to the <MAILEXE> directory and start the Setup program by double-clicking the SETUP.EXE file. When the Setup program prompts you for the Microsoft Mail directory, type MAIL32 as the location. For example, if the network version of Mail is located in the MAIL32 directory on drive X, type X:\MAIL32.
To set up a user for Mail 3.2a command:

  1. Install Windows to <MYDIR> on the server using the following setup /n
  2. Run Windows from <MYDIR>. In Windows File Manager, go to the <MAILEXE> directory and start the Setup program by double-clicking the SETUP.EXE file. When the Setup program prompts you for the Microsoft Mail directory, type MAIL32 as the location. For example, if the network version of Mail is located in the MAIL32 directory on drive X, type X:\MAIL32. This will create an MSMAIL directory in the <MYDIR> directory on the server containing the user's .INI files.

Running Windows Locally and Mail from the Network

Definitions

Installation Steps

To set up the Mail 3.2a shared files

  1. Install the Mail postoffice in the <MAILDATA> and <MAILEXE> directories as described on pages 6-10 in the Microsoft Mail "Administrator's Guide." Designate drive letters for each directory.
  2. At the MS-DOS command prompt, type the following and press ENTER

    copy <drive>:\setup.* <destination>

    where <drive> is the drive and directory where you ran the self- extracting SETUPD.EXE file and <destination> is the drive and directory where your SETUP.EXE and SETUP.INF files currently reside. For example, if you ran the self-extracting file from the TEST directory on drive D, and the SETUP.EXE and SETUP.INF files are located in the MAILEXE directory on drive C, type the following command:

    copy d:\test\setup.* c:\mailexe

  3. At the MS-DOS command prompt, type the following and press ENTER

    copy <mailexe>\setup.inf <mailexe>\setupinf.old

    where <mailexe> is the complete path to the directory containing the Microsoft Mail for Windows SETUP.EXE program. For example, if SETUP.EXE is located in the MAILEXE directory on drive C, type the following command:

    copy c:\mailexe\setup.inf c:\mailexe\setupinf.old

  4. Using any text editor, edit the SETUP.INF file. In the [Setup] section, replace the following line

    1, setup.exe,,,, 1993-03-09, !DECOMPRESS,, OLDER, !READONLY,,,,,, 62608,,,, 3.2.0.4027,

    with:

    1, setup.exe,,,, 1994-07-22, !DECOMPRESS,, OLDER, !READONLY,,,,,, 62880,,,, 3.2.0.4074,

    Save the file and close the text editor.

    NOTE: For these changes to affect the entire network, each existing user must run Setup again.
  5. Log on to the network as Supervisor and run Windows from the <WIN31> directory. In Windows File Manager, go to the <MAILEXE> directory and start the Setup program by double-clicking the SETUP.EXE file. When the Setup program prompts you for the Microsoft Mail directory, type MAIL32 as the location. For example, if the network version of Mail is located in the MAIL32 directory on drive X, type X:\MAIL32.
To set up a user for Mail 3.2a

  1. Install Windows to the <WIN31> directory on the workstation.
  2. Run Windows from <WIN31>. In Windows File Manager, go to the <MAILEXE> directory and start the Setup program by double-clicking the SETUP.EXE file. When the Setup program prompts you for the Microsoft Mail directory, type MAIL32 as the location. For example, if the network version of Mail is located in the MAIL32 directory on drive X, type X:\MAIL32. This will create an MSMAIL directory in the <WIN31> directory on the workstation containing the user's .INI files.

Running Windows from the Network and Mail Locally

Definitions

Installation Steps

To set up the Mail 3.2a shared files

  1. Install Windows in a server directory (<WINSHARE>) and designate a drive letter for the directory. Set full rights for Supervisor, ReadOnly, and FileScan (for Novell networks) for all users.
  2. Install the Mail postoffice in the <MAILDATA> and <MAILEXE> directories as described on pages 6-10 in the Microsoft Mail "Administrator's Guide." Designate drive letters for each directory.
  3. At the MS-DOS command prompt, type the following and press ENTER

    copy <drive>:\setup.* <destination>

    where <drive> is the drive and directory where you ran the self- extracting SETUPD.EXE file and <destination> is the drive and directory where your SETUP.EXE and SETUP.INF files currently reside. For example, if you ran the self-extracting file from the TEST directory on drive D, and the SETUP.EXE and SETUP.INF files are located in the MAILEXE directory on drive C, type the following command:

    copy d:\test\setup.* c:\mailexe

  4. At the MS-DOS command prompt, type the following and press ENTER

    copy <mailexe>\setup.inf <mailexe>\setupinf.old

    where <mailexe> is the complete path to the directory containing the Microsoft Mail for Windows SETUP.EXE program. For example, if SETUP.EXE is located in the MAILEXE directory on drive C, type the following command:

    copy c:\mailexe\setup.inf c:\mailexe\setupinf.old

  5. Using any text editor, edit the SETUP.INF file. In the [Setup] section, replace the following line

    1, setup.exe,,,, 1993-03-09, !DECOMPRESS,, OLDER, !READONLY,,,,,, 62608,,,, 3.2.0.4027,

    with:

    1, setup.exe,,,, 1994-07-22, !DECOMPRESS,, OLDER, !READONLY,,,,,, 62880,,,, 3.2.0.4074,

    In the [MsMail Prog] and the [Msmail System] sections, change the word Older to Never.

    Save the file and exit the text editor.

    NOTE: For these changes to affect the entire network, each existing user must run Setup again.
  6. Log on to the network as Supervisor and run Windows from the <WINSHARE> directory. In Windows File Manager, go to the <MAILEXE> directory and start the Setup program by double-clicking the SETUP.EXE file. When the Setup program prompts you for the Microsoft Mail directory, type MAIL32 as the location. For example, if the local version of Mail is located in the MAIL32 directory on drive C, type C:\MAIL32.
To set up a user for Mail 3.2a

  1. Install Windows to <MYDIR> on the server using the following command:

    setup /n

  2. Run Windows from <MYDIR>. In Windows File Manager, go to the <MAILEXE> directory and start the Setup program by double-clicking the SETUP.EXE file. When the Setup program prompts you for the Microsoft Mail directory, type C:\MSMAIL as the location. This will create an MSMAIL directory that contains all the files needed to run Mail.

Additional query words: 3.20 wga

Keywords: kbdownload kbgraphxlinkcritical KB107444


Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.