How to select a custom page size in FoxPro for Macintosh

MORE INFORMATION

WARNING: ANY USE BY YOU OF THE INFORMATION PROVIDED IN THIS ARTICLE IS AT YOUR OWN RISK. Microsoft provides this information "as is" without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

You can edit the FoxPro for Macintosh resource file to add this functionality. The following information is excerpted from the FoxPro ReadMe file shipped with FoxPro for Macintosh.

Changing Paper Sizes for the ImageWriter

To change paper sizes for the ImageWriter printer, you need to adjust the FoxPro for Macintosh resource file. Information about paper sizes is stored in the PREC resource of FoxPro and is accessed through the Page Setup dialog box.

Custom page sizes are not available with all printer drivers. For example, you cannot change the paper size used by a LaserWriter.

To add a custom paper size option to the Page Setup dialog box:

1. Quit FoxPro for Macintosh.
2. Open FoxPro for Macintosh in a resource editor (such as ResEdit).
3. Open the PREC resource.
4. Open the ID number 4.
5. In the field labeled "Number of Btns," change the number from 5 to 6.
6. In the fields labeled "Btn 6 Height" and "Btn 6 Width," enter the height and width of the new paper size. Each number represents 1/120th of an inch. For example, an 8.5-by-11-inch paper size has a height of 1320 and a width of 1020.
7. In the field labeled "Btn 6 Name," add a descriptive name to appear next to the button.
8. Save your changes and exit the resource editor.

To use the custom paper size option:

1. Select an ImageWriter printer with the Macintosh Chooser.
2. Start FoxPro.
3. From the File menu, choose Page Setup.
4. Choose the custom paper size.

NOTE: FoxPro adds a .5-inch margin to the top of all documents printed with an ImageWriter. To remove this margin, select the No Gaps Between Pages check box in the Page Setup dialog box.