Using Windows Sound System 2.0 with Unsupported Card

MORE INFORMATION

Scenario 1

A Windows Sound System compatible Windows driver is one that supports the software calls that the Windows Sound System Audio Control makes. If your card is supplied with a Windows Sound System compatible driver, you can configure Windows Sound System to use it as follows:

1. Insert the Windows Sound System Disk 1 in your drive, choose Run from the Program Manager File menu, type the following, and press ENTER:

   A:SETUP

   (Substitute A: with B: if you're loading from drive B.)
2. Choose Continue at the first screen discussing possible hearing damage that can occur if you use headphones other than the Windows Sound System headphones.
3. At the second screen, use Task Manager to close any other applications that may be running, then choose Continue.
4. At the third screen, choose Other from the list of available sound cards. You will be prompted for your drivers disk. Insert the disk in the designated drive and continue setup.

Scenario 2

If your card is provided with a Windows sound driver (but not a Windows Sound System driver), you should be able to use Windows Sound System with almost full functionality. To use your driver with the Windows Sound System, follow these steps:

1. Install the Windows driver using the instructions that came with your Sound Card or with the driver.
2. Insert the Windows Sound System Disk 1 in your drive, choose Run from the Program Manager File menu, type the following and press ENTER:

   A:SETUP

   (Substitute A: with B: if you're loading from drive B.)
3. The third setup screen will not give you the list of available sound card types. Instead, it will give you a message similar to the following:
   Setup has detected the presence of one or more sound drivers. These drivers may not be compatible with the Windows Sound System. You may wish to remove them from Control Panel before proceeding. Continue to install software anyway?
   Choose the Continue button.
4. Provide the rest of the Windows Sound Systems disks when they are requested.

These Windows Sound System utilities should work correctly:

• Quick Recorder
• Sound Finder
• Music Box (if you have a CD-ROM drive)
• Voice Pilot
• Sound Control Panel
• Proofreaders

These Windows Sound System utilities will NOT work under this configuration:

• Audio Control. (You will get a message saying "No Windows Sound System compatible mixer driver is installed.") To control the volume or recording input settings, you will have to use the mixer utility that came with your card.
• Windows Sound System Setup. (You will be unable to configure your hardware or perform a sound check.)

Scenario 3

If your card is 100-percent compatible with one of the sound cards for which the Windows Sound System provides a driver, you can try the following steps:

1. Make backup copies of your SYSTEM.INI, WIN.INI, and CONTROL.INI files.
2. Run the Drivers option from Control Panel and remove your current sound driver. Restart Windows.
3. Run Windows Sound System setup (see Scenario 1). When you get to the third screen, choose the listed sound card that your card emulates.
4. Proceed with setup.
   
   NOTE: If after restarting your computer, you get error messages stating that the audio hardware could not be found, you may have to restore your original sound driver by reinstating your backup copies of SYSTEM.INI, WIN.INI, and CONTROL.INI.

Scenario 4

Many sound cards provide a good Sound Blaster emulation mode. To use one of these cards with the Windows Sound System, use the following steps:

1. Make sure that your sound card is configured for Sound Blaster emulation, according to the directions provided with your card.
2. Run Control Panel and choose Drivers. Choose Add.
3. From the list of drivers, choose Creative Labs Sound Blaster 1.5 and choose OK or press ENTER.
4. You will be asked to insert one of your Windows disks.
5. Follow the instructions provided above for installing the Windows Sound System with a pre-installed sound driver (see Scenario 2).

These Windows Sound System utilities should work correctly:

• Quick Recorder
• Sound Finder
• Sound Control Panel
• Proofreaders

These Windows Sound System utilities may work with some limitations:

• Music Box. (You will have to connect the headphone jack to the line-out port on the back of your sound card. You will also probably only get monophonic sound.)
• Voice Pilot. (You will have no way to specify whether voice commands will be coming in through the microphone port or the line-in port. If your microphone port is not powered, you may not be able to use the Windows Sound System microphone unless the card monitors both the mike port and the line-in port for voice commands.)

These Windows Sound System utilities will NOT work:

• Audio Control. (You will get a message saying "No Windows Sound System compatible mixer driver is installed.") The Windows Sound Blaster driver does not come with a mixer utility, so you will have to control the volume by using the volume knob on your card (if there is one).
• Windows Sound System Setup. (You will be unable to configure your hardware or perform a sound check.)

This article refers to products manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.