Modifying the Emergency Repair Disk After Installing CD-ROM

MORE INFORMATION

WARNING: The following workaround may cause system-wide problems that may require you to reinstall Windows NT to correct them. Microsoft cannot guarantee that any problems resulting from the use of following can be resolved without reinstalling. Use this workaround at your own risk.

To run an Emergency Repair Disk after installing a supported adapter and CD- ROM drive, do the following steps:

1. Edit the Repair.BootFiles and Repair.WinntFiles sections in REPAIR.INF on the Emergency Repair Disk so that all references to source files point to their new location. For example, if you initially ran the unsupported CD-ROM setup, all references to $WIN_NT$.~LS should be changed to i386.
2. Boot from the Setup Disk for CD-ROM Installation.
3. At the first blue screen, press the R key (for Repair).
4. When prompted to do so, insert the modified Emergency Repair Disk that was originally created for this computer.
   
   You will be prompted to insert the Windows NT Setup CD if you haven't already done so.
5. Three selections appear and all three will be selected by default. Move the selector bar with the arrow keys to highlight the options. Use the SPACEBAR to select/clear the options. Select the desired option(s).
6. Move the selector bar to the line that says to Continue and press the ENTER key.