Err Msg: Processor in Slot 1 Failed
Article ID: 111478
Article Last Modified on 3/15/2004
APPLIES TO
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
This article was previously published under Q111478
SUMMARY
If you add an additional processor to the Compaq Proliant 2000, Windows NT
may report "processor in slot 1 failed" during startup.
To resolve this problem, perform the following steps:
- Be sure to use processor board #148677-001 Rev level F or higher.
- Upgrade the firmware ROM on the Proliant 2000 motherboard to 010594 or
higher. You can download the firmware update file (in compressed PKZip
format) from the COMPAQ forum on CompuServe.
Additional query words: prodnt smp multiprocessor dual
Keywords: kbhardware KB111478