Knowledge Base

Server Problems After Extended Use w/EtherExpress & EXP16ODI

Article ID: 111574

Article Last Modified on 10/28/1999

APPLIES TO

This article was previously published under Q111574

SYMPTOMS

After running Microsoft Windows for Workgroups (WFWG) version 3.11 for several hours, you can connect to other workstations and other network features still work, but no one can connect to your workstation.

CAUSE

If you are using the Intel EtherExpress 16 network interface card (NIC) with the EXP16ODI.COM MAC driver, the server portion of Windows for Workgroups 3.11 may stop functioning. You can use other network features; however, your workstation is unable to act as a server until it is rebooted.

It appears that NWNBLINK.386 resets the NIC and the ODI MAC driver does not replace the multicast list for the network after the NIC is reset.

STATUS

Microsoft has confirmed this to be a problem in Microsoft Windows for Workgroups version 3.11. We are researching this problem and will post new information here as it becomes available.

Additional query words: 3.11 hangs locks

Keywords: KB111574


Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.