KB111702 - PC WRmt: Mail Remote MAILDRV.EXE 3.2.0.4002 Update

Article ID: 111702

Article Last Modified on 10/30/2006

Microsoft Mail Remote 3.2

This article was previously published under Q111702

SUMMARY

Microsoft provides a replacement for the MAILDRV.EXE file that is included with version 3.2 of Microsoft Mail Remote for Windows.

For complete information about obtaining and installing the MAILDRV.EXE file, see the following sections:

To download the updated file
To update your MAILDRV.EXE file

MORE INFORMATION

This update contains MAILDRV.EXE, a replacement for the MAILDRV.EXE file that is included with version 3.2 of Microsoft Mail Remote for Windows. This update includes the following modification:

When Microsoft Mail Selector (MAILDRV.EXE) loads a driver after EFAX has been activated, the driver does not become EFAX aware. Therefore, when EFAX is activated, the provider section for the EFAX driver is removed from the MSMAIL.INI file in the Windows directory. This updated version of the Mail Selector (MAILDRV.EXE) makes all the drivers EFAX aware. This ensures that when the driver is installed, the EFAX driver is not removed.

NOTE: Because MAILDRV.EXE looks at the EFAX software, this version of MAILDRV.EXE should be installed ONLY on machines running version 3.11 of Microsoft Windows for Workgroups.

To download the updated file

The following file is available for download from the Microsoft Download Center:

Download Mdrvupd.exe now

For additional information about how to download Microsoft Support files, click the following article number to view the article in the Microsoft Knowledge Base:

119591 How to Obtain Microsoft Support Files from Online Services

Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help to prevent any unauthorized changes to the file.

After you download MDRVUPD.EXE to a clean directory, run it (by typing mdrvupd at the MS-DOS prompt) to extract the contents of the file. You should receive the following files:

MAILDRV.EXE (23,952 bytes, dated 10-20-93, 3:58 P.M.)
README.TXT

To update your MAILDRV.EXE file

At the MS-DOS command prompt, type the following and press ENTER

copy <path>:\maildrv.exe <destination>

where <path> is the drive and directory where you ran the self- extracting MDRVUPD.EXE file and <destination> is the drive and directory where your MAILDRV.EXE file currently resides. For example, if you ran the self-extracting file from the TEST directory on drive D, and your MAILDRV.EXE file is located in the MSMAIL directory on drive C, type the following command:

copy d:\test\maildrv.exe c:\msmail3.20 wga

Keywords: kbdownload kbgraphxlinkcritical KB111702