KB111704 - PC WRmt: Mail Remote MSRMT.DLL Version 3.2.4013 Update

Article ID: 111704

Article Last Modified on 10/30/2006

Microsoft Mail Remote 3.2

This article was previously published under Q111704

SUMMARY

Microsoft provides a replacement for the MSRMT.DLL that is included with version 3.2 of Microsoft Mail Remote for Windows.

For complete information about obtaining and installing the MSRMT.DLL file, see the following sections:

To download the updated file
To update your MSRMT.DLL file

MORE INFORMATION

This update contains MSRMT.DLL, a replacement for the MSRMT.DLL file that is included with version 3.2 of Microsoft Mail Remote for Windows. This replacement file provides additional enhancements to the original MSRMT.DLL file, correcting the following problems:

External postoffices, SNADS DGNs, and nodes for PROFS and OfficeVision are not displayed in alphabetic order because Remote Mail for Windows reads them in one at a time and adds them to the address list hierarchy. With the updated version of MSRMT.DLL, Remote Mail for Windows reads in the external postoffices, SNADS DGNs, and PROFS nodes all at once, sorts them, and then adds them to the address list hierarchy.
The Windows Remote client may receive general-protection (GP) faults when it reads in a new message whose header within the .MAI file is greater than a certain length. The message is successfully downloaded from the postoffice to the Inbox .MBG file; however, it fails when it is read into the Mail message file (MMF). This problem has been fixed with version 3.2.4010 of MSRMT.DLL.

A message remaining in the Outbox could be misdirected if the remote address book was updated without uploading messages. The client will now check for the outbound messages prior to updating the address book. To ensure this fix works correctly, the following DLLs must be upgraded in conjunction with this DLL:
```
      MSRMTCN.DLL  version 3.2.4013
      MSRMTSU.DLL  version 3.2.4013
      MSRMTTR.DLL  version 3.2.4013
      MSRMTUI.DLL  version 3.2.4013
						
```

To download the updated file

The following file is available for download from the Microsoft Download Center:

Download Msrmt.exe now

For additional information about how to download Microsoft Support files, click the following article number to view the article in the Microsoft Knowledge Base:

119591 How to Obtain Microsoft Support Files from Online Services

Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help to prevent any unauthorized changes to the file.

After you download MSRMT.EXE to a clean directory, run it (by typing msrmt at the MS-DOS prompt) to extract the contents of the file. You should receive the following files:

MSRMT.DLL (234,544 bytes, dated 6-15-95, 6:21 P.M.)
README.TXT

To update your MSRMT.DLL file

Verify that the Microsoft Mail Remote driver (MSRMT.DLL) is the current driver in the Mail System Selector (MAILDRV.EXE) by running the Mail System Selector from the Windows Program Manager, selecting Microsoft Mail Remote, then choosing Set As Current Mail Driver.
At the MS-DOS command prompt, type the following and press ENTER
copy <path>:\msrmt.dll <destination>
where <path> is the drive and directory where you ran the self- extracting MSRMT.EXE file and <destination> is the drive and directory where your MSRMT.DLL file currently resides. For example, if you ran the self-extracting file from the TEST directory on drive D, and your MSRMT.DLL file is located in the Windows SYSTEM subdirectory on drive C, type the following command:
copy d:\test\msrmt.dll c:\windows\system

Additional query words: 3.20

Keywords: kbdownload kbgraphxlinkcritical KB111704