PROFS: Using the CMS TAG FILE Command
Article ID: 111950
Article Last Modified on 10/30/2006
APPLIES TO
- Microsoft Mail Gateway for IBM PROFS and OfficeVision 3.2
- Microsoft Mail Gateway for IBM PROFS and OfficeVision 3.3
- Microsoft Mail Gateway for IBM PROFS and OfficeVision 3.4
This article was previously published under Q111950
SUMMARY
The tag in CMS is the location where the destination USER and NODE
information are held. By using the TAG FILE command, this information
can be inserted into an empty tag. (Tag information is the Destination
information associated with a particular CMS message or file, for example,
destination USER and NODE).
Usually this process is used when testing the response of Host Access
for mail addressed to a particular NODE or USER. The command line is:
TAG FILE rdr_number NEW_NODE NEW_USER
where NEW_NODE and NEW_USER are the respective Node and User information
the Tag the file with.
NOTE: The rdr_number is obtained by typing Q RDR ALL at the CMS prompt.
Additional query words: 3.20 3.30 3.40
Keywords: KB111950