Installing Synoptics EZ View Net Manager on WFW 3.11

MORE INFORMATION

1. Install WFW 3.11 with the custom option:
   
   
   1. Select the proper NIC and NDIS driver.
   2. Do not select TCP/IP as a protocol.
2. In CONFIG.SYS, remove all drivers related to NETMANAGE, such as PROTMAN.DOS and NETMANAG.DOS. The following device driver is needed:

   DEVICE=C:\WINDOWS\IFSHLP.SYS

3. In AUTOEXEC.BAT, make sure that NETBIND is not executed. All binding should be performed by the NET START command.
4. In PROTOCOL.INI, add the following NETMANAGE section and bind it to the NDIS driver section as shown below:

         [NETMANAGE]
         DRIVERNAME = NETMNGS
         BINDINGS =  <NDIS driver section name>
   						

5. In SYSTEM.INI, add NETMANAG.DOS to the transport settings in the [NETWORK DRIVERS] section as shown below:

         [NETWORK DRIVERS]
         .
         .
         transport = ndishlp.sys,c:\netmanag\netmanag.dos,*netbeui
         .
         .
   						

6. Also in SYSTEM.INI, change the LoadRMDrivers line to YES as shown below:

         Example:
         LoadRMDrivers = Yes