FastTips: Text Formatting Questions & Answers
FastTips: Text Formatting Questions & Answers
Q112537
-------------------------------------------------------------------
The information in this article applies to:
- Microsoft Publisher version 2.0
-------------------------------------------------------------------
SUMMARY
=======
The following is the complete contents of the FastTips Questions and
Answers article titled "Q112537: Text Formatting Questions & Answers." This
article is part of the FastTips Questions and Answers section for version
2.0 of Microsoft Publisher.
======================================================================
Microsoft(R) Product Support Services Application Note (Text File)
Q112537: Text Formatting Questions & Answers
======================================================================
Revision Date: 03/94
4 Pages, No Disk
The following information applies to Microsoft Publisher version 2.0.
--------------------------------------------------------------------
| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY |
| ACCOMPANY THIS DOCUMENT (collectively referred to as an |
| Application Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY |
| KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO |
| THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A |
| PARTICULAR PURPOSE. The user assumes the entire risk as to the |
| accuracy and the use of this Application Note. This Application |
| Note may be copied and distributed subject to the following |
| conditions: 1) All text must be copied without modification and |
| all pages must be included; 2) If software is included, all files |
| on the disk(s) must be copied without modification [the MS-DOS(R) |
| utility DISKCOPY is appropriate for this purpose]; 3) All |
| components of this Application Note must be distributed together; |
| and 4) This Application Note may not be distributed for profit. |
| |
| Copyright 1994 Microsoft Corporation. All Rights Reserved. |
| Microsoft and MS-DOS are registered trademarks and Windows |
| is a trademark of Microsoft Corporation. |
--------------------------------------------------------------------
1. Q. My text looks fine on the screen but prints with a jagged
margin. What's wrong?
A. If you are using a proportionally spaced font, such as Arial,
and have inserted spaces to separate columns, the text will
print with jagged alignment. To correctly align text, use an
absolute method such as tabs, columns, or separate frames.
- To use tabs, first eliminate the spaces separating your text
columns. Then set tab stops where you want your second and
subsequent columns to start, and press the TAB key between
columns.
For more information about setting tabs, refer to pages
198-202 in the "Microsoft Publisher User's Guide."
- To use columns, choose Text Frame Properties from the
Layout menu and specify the number of columns you want.
By default, both columns will be left-aligned.
For more information about setting up columns, refer to pages
134-135 in the "Microsoft Publisher User's Guide."
- To use separate frames, draw multiple text frames side
by side and give them the alignment you want them to
have.
For more information about creating text frames, refer to
pages 128-145 in the "Microsoft Publisher User's Guide."
2. Q. I want to print white text on a black background. How do I do
this?
A. To print white text on a black background, use the following
four-step procedure:
1. Select your text.
2. From the Format menu, choose Character. Choose white as
the color for your text. Choose OK.
3. Select the text frame.
4. From the Format menu, choose Shading. Choose solid black
as the color for the text box. Choose OK.
Some printers, such as the Hewlett-Packard (HP) LaserJet Series II,
see TrueType text as black, absolutely. If you are using
such a printer, you must select the Print TrueType As Graphics
option in the Setup window of the Printers option in Control Panel.
3. Q. How do I format tabs in Publisher?
A. For information about setting tabs in Publisher, see the
following two references:
1. The "Setting Tabs" section on pages 198-202 of the "Microsoft
Publisher User's Guide"
2. Publisher Help; search for the word "tabs" and read the
following two topics:
a. Changing the Alignment or Leader for Tab Stops
b. Inserting or Removing a Tab Stop
4. Q. I cannot access my TrueType fonts in Publisher. What's wrong?
A. To troubleshoot this problem, use the following five-step
procedure:
1. From the Main group in Windows, open the Control Panel, and
choose Fonts.
2. Click the TrueType button and make sure the Enable TrueType
Fonts box is selected. Close the Fonts Control Panel.
3. Confirm Windows is supplying TrueType fonts to applications.
To do this, launch Windows Write from the Accessories group,
choose Fonts from the Character menu, and check for
available TrueType fonts.
4. Return to Publisher, create a text frame, and see which
fonts are available from the font selection list on the
horizontal toolbar.
5. If fonts are available in text frames but not available in
WordArt 2.0, check the file byte size of SETUP.INF, which is
located in the Windows directory. If this file is more than
60K in size, copy SETUP.INF from your original Windows
disks into the Windows directory, overwriting the one on
your hard drive.
For more information about troubleshooting this problem,
order article Q104153 from the Microsoft Publisher FastTips
Catalog.
5. Q. How do I overlap text frames so the text in the frame behind
doesn't wrap around the frame that is in front?
A. Layered text frames normally always provide text wrap.
To work around this situation, use the following four-step
procedure:
1. Place one of the layered text frames on the background page.
(To switch to the background page, choose Background Page
from the Page menu.)
2. Place the second (overlapping) layered text frame on the
foreground page.
3. Set the shading of the foreground frame to Clear.
4. Arrange the frames to achieve the desired overlapping effect.
NOTE: You can use the CTRL+M keyboard combination to toggle
between the foreground and background pages.
6. Q. How do I create a watermark in Publisher?
A. For information about creating watermarks, please refer to
page 111 of the "Microsoft Publisher User's Guide."
7. Q. How do I rotate text in Publisher?
A. Publisher cannot rotate text. You can, however, rotate text
using WordArt, an object-linking-and-embedding (OLE) server
application that ships with Publisher. WordArt 1.0 can rotate
text to 30, 45, and 90 degrees. WordArt 2.0 can rotate TrueType
text incrementally, to any degree. For more information about
WordArt, see the WordArt topic in Publisher Help or refer to
chapter 7 in your "Microsoft Publisher User's Guide."
8. Q. I have text in a format for which Publisher has no filter.
How can I import that text?
A. There are two methods you can use to import text that is in
a format Publisher can't import directly: The clipboard method and
the text file method.
1. The Clipboard Method
a. Import the text into another Windows-based application.
b. Select and copy the text to the Windows Clipboard.
c. Create a text frame in Publisher and paste the text into
the text frame.
2. The Text File Method
a. Open the text file in its native application and save the
file in a text only format.
b. Create a text frame in Publisher and choose Import Text from
the File menu.
c. Locate and select the text file you created, and choose OK.
For more information about importing text into Publisher, refer to
the topic "Importing Text" in the Publisher Help file. You may
also want to query on the name of the application from which you
want to import the text.
9. Q. What should I do when I reach the end of a text frame but
I want to type more text?
A. When your text reaches the end of a text frame, it automatically
flows into the overflow area.
To see the overflowed text, you can either make your text frame
larger, copy part of the text to another frame, or link the first
text frame to a second one. To link text frames, use the following
four-step procedure:
1. Create a new text frame, either on the same page or on a
different one.
2. Click the original text frame.
3. Click the button at the bottom of the text frame. Your
pointer should change to a cup icon.
4. Position your pointer over the new, empty text frame, and
press your left mouse button.
The text that was in the overflow area should now appear in the
new text frame. The two text frames are now linked.
For more information about creating, editing, and changing text
frames, refer to page 128 of the "Microsoft Publisher User's
Guide." Also, see the "Text Frames" topic in Publisher Help.
10. Q. What I see on my screen does not look like what I have typed,
and the rest of my text doesn't show in the text frame.
What's wrong?
A. Publisher has several views from which you can choose. Each
of these views requires that Publisher resize the document to
simulate the different zoom percentages, from 3 percent to
400 percent, depending on the document. Publisher does its
best to represent your text and graphics accurately in
the view you select. To view your document in the most
accurate view, however, you must set the percentage to 100
percent. All other views are merely an approximation.
For more information about WYSIWYG (that is, "what you see is
what you get") issues in Publisher, order article Q104921 from
the Microsoft Publisher FastTips Catalog.
Additional query words: 2.00 q&a fast tips fastips pub20 qpub20 word
art