Knowledge Base

MS DLC over ODI May Cause GP Faults in WFWG 3.11

Article ID: 113515

Article Last Modified on 10/8/1999

APPLIES TO

This article was previously published under Q113515
The following article contains information on the use of Windows for Workgroups with third-party products or configurations that have not been tested and are not supported by Microsoft.

If the steps or procedures described in this article do not function properly, contact the manufacturer of the third-party product for more information or use a supported configuration.

SYMPTOMS

You receive a general protection (GP) fault in the KEYBOARD.DRV driver file or another driver file.

CAUSE

If you install the MS DLC protocol over an ODI driver in a token-ring configuration on a computer running Microsoft Windows for Workgroups version 3.11, the computer may produce GP faults.

RESOLUTION

The following actions may help you to work around this problem:

  • Use an MS DLC protocol intended for Windows for Workgroups 3.11.
  • For instructions about using ODINSUP with Windows for Workgroups, contact Novell or a Novell authorized reseller, and query on the following words here in the Microsoft Knowledge Base:

    odinsup and netx and novell and wfwg

  • Use current Novell NetWare drivers.

Additional query words: 3.11 Gpfault msdlc gpf

Keywords: KB113515


Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.