Windows NT Fault Tolerance and the Boot and System Partitions
Article ID: 113932
Article Last Modified on 2/20/2007
APPLIES TO
- Microsoft Windows 2000 Server
- Microsoft Windows 2000 Advanced Server
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
- Microsoft Windows NT Server 4.0 Standard Edition
This article was previously published under Q113932
Disk mirroring is the only type of fault tolerance provided by Windows NT
Advanced Server that you can use on the system or boot partitions. You
must create disk striping, disk striping with parity, and volume sets
entirely from free disk space.
If vendor hardware implementations of fault tolerance (for example, disk
controllers that support mirroring, and RAID 5--striping with parity) are
compatible with Windows NT, then you can use them on the boot and system
partitions because they are implemented below the operating system level.
Additional query words: prodnt drive tshoot repair
Keywords: kbother KB113932